Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Journal of Physics

Noise Properties of YBa 2 Cu 3 O 7-? Josephson Devices

J. Chen, Hiroyuki Nakamura, Takuya Yamashita

Published Apr 1, 1996• 0 citations
OpenAlex

Abstract

White noise properties of YBa2Cu3O7-δ (YBCO) grain boundary Josephson devices have been studied. Bias voltage (V) dependence of the white voltage noise spectral density (SV) were measured in detail for YBCO dc-SQUIDS and single Josephson junctions on different kinds of substrates with various misorientation angles. It was found that Sv was in good agreement with the thermal noise theory hypothesizing that the device noise was only due to Johnson noise. This implies that the quantum noise can be achieved with optimized YBCO dc-SQUIDS. We have designed a YBCO dc-SQUID with a cross section of junctions as small as 0.1 μm^2. It was predicted that the minimum intrinsic white energy resolution (E””'‘) should be about Planck's constant (h) at 4.2 K. The actual minimum eW, value of 1.76 x 10^-33 J/Hz = 2.7 h was obtained. This result demonstrates that E” '”of YBCO dc-SQUID s can be minimized to the order of h.

Related papers

White-noise Properties of YBa2Cu3O7-δ Grain-boundary dc Superconducting Quantum Interference Devices

Hiroyuki Nakamura, Jian Chen, Tomoya Ogawa Tomoya Ogawa +1 more

We have studied white (high-frequency)-noise properties of YBa2Cu3O7-δ grain-boundary dc superconducting quantum interference devices (SQUIDs). Bias voltage (V) dependence of the white-noise voltage spectral density (S v) was measured for dc-SQUIDs and junctions. As a result, S v at low bias voltage can be explained by the thermal noise theory of tunnel junctions. Furthermore, the energy resolution of 1.96×10-32 J/Hz is obtained at 43 K in the white-noise region. The measured energy resolution of the dc-SQUIDs is in good agreement with the theoretical results. According to the above results, YBa2Cu3O7-δ dc-SQUIDs with a quantum noise limit might be realized at 4.2 K.

Japanese Journal of Applied Physics•Nov 1, 1995•4 citations

Submicron YBa2Cu3O7−δ grain boundary junction dc SQUIDs

M. Kawasaki, P. K. Chaudhari, T. H. Newman +1 more

We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.

Applied Physics Letters•Jun 3, 1991•59 citations

Low frequency (1/f) noise in YBa2Cu3O7−δ grain boundary junction dc superconducting quantum interference devices

J. Chen, T. Ogawa, Hiroyuki Nakamura +3 more

We have studied low frequency (1/f) noise of YBa2Cu3O7−δ dc superconducting quantum interference devices (SQUIDs) on SrTiO3 bicrystal substrates. 1/f flux noise, either measured at different temperatures for optimized bias current or measured at 77 K for different bias currents, is almost constant. These facts imply that 1/f noise mainly comes from fluctuations of the critical current of the Josephson junction that form the SQUID. Also, we explain the critical current fluctuations in the junction by an equilibrium temperature fluctuation model.

Journal of Applied Physics•Aug 1, 1994•13 citations

Low 1/f noise single-layer YBa2Cu3Ox dc SQUID at 77 K

Gergely Friedl, M. Vildić, Bernhard Roas +6 more

Autonomous single-layer dc superconducting quantum interference devices (SQUIDs) have been prepared from epitaxial, laser-deposited YBa2Cu3Ox films on step edge SrTiO3 and LaAlO3 substrates. For device patterning, a SiOx inhibit technique as well as conventional ethylenediaminetetraacetic wet etch was used. The Josephson junctions are of grain boundary type. Their widths are 5 μm. The SQUID hole is a square of about 5 μm; the SQUID inductance is estimated to be about 20 pH. We obtained a very regular, nonhysteretic flux to voltage modulation over more than 100 flux quanta (Φ0). The maximum voltage signal is of the order of 15 μV peak to peak and the maximum transfer function dV/dΦ at the appropriate flux bias is 50 μV/Φ0 at 77 K. The best value of the equivalent flux noise as measured in the flux locked loop mode is 1.4×10−5 Φ0/Hz1/2 at 1 Hz and 1×10−5 Φ0/Hz1/2 in the white noise region for f≳5 Hz. This results in an energy resolution εn,w(f≳5 Hz)=1×10−29 J/Hz in the white noise region and 2×10−29 J/Hz at 1 Hz.

Applied Physics Letters•Jun 15, 1992•69 citations

Noise in thin-film YBa2Cu3O7step-edge junction RF SQUIDS

J Sloggett, David L. Dart, C. P. Foley +3 more

We describe the noise performance of thin-film YBa 2 Cu 3 O 7 RF SQUIDS fabricated on MgO substrates with single step-edge Josephson junctions. A substantial range of noise levels has been observed for devices having similar electrical parameters (inductance, critical current, RF frequency). The best devices have white-noise levels below 10 -4 phi 0 Hz -1/2 when operated at a frequency of 170-200 MHz and have 1/f noise corners of a few hertz. Measurements of the V RF versus L RF characteristics of one SQUID, indicate that intrinsic device noise dominates the measured total noise of these devices. The white noise of all devices exceeds the predictions of the theory of Kurkijarvi at al. by a large factor, apparently because of non-ideal behaviour of step-edge Josephson junctions.

Superconductor Science and Technology•May 1, 1994•9 citations

Noise properties of nanoscale YBa 2 Cu 3 O 7−δ Josephson junctions

David Gustafsson, Floriana Lombardi, Thilo Bauch

We present electric noise measurements of nanoscale biepitaxial YBa${}_{2}$Cu${}_{3}$O${}_{7\ensuremath{-}\ensuremath{\delta}}$ (YBCO) Josephson junctions fabricated by two different lithographic methods. The first (conventional) technique defines the junctions directly by ion milling etching through an amorphous carbon mask. The second (soft patterning) method makes use of the phase competition between the superconducting YBCO (Y123) and the insulating Y${}_{2}$BaCuO${}_{5}$ (Y211) phase at the grain boundary interface on MgO (110) substrates. The voltage noise properties of the two methods are compared in this study. For all junctions (having a thickness of 100 nm and widths of 250--500 nm), we see a significant amount of individual charge traps. We have extracted an approximate value for the effective area of the charge traps from the noise data. From the noise measurements, we infer that the soft-patterned junctions with a grain-boundary (GB) interface manifesting a large $c$-axis tunneling component have a uniform barrier and a superconductor-insulator-superconductor (SIS) -like behavior. The noise properties of soft-patterned junctions having a GB interface dominated by transport parallel to the $ab$ planes are in accordance with a resonant tunneling barrier model. The conventionally patterned junctions, instead, have suppressed superconducting transport channels with an area much less than the nominal junction area. These findings are important for the implementation of nanosized Josephson junctions in quantum circuits.

arXiv:1112.0680•Physical Review B•Nov 28, 2011•14 citations
White noise properties of YBa2Cu3O7-δ (YBCO) grain boundary Josephson devices have been studied. Bias voltage (V) dependence of the white voltage noise spectral density (SV) were measured in detail for YBCO dc-SQUIDS and single Josephson junctions on different kinds of substrates with various misorientation angles. It was found that Sv was in good agreement with the thermal noise theory hypothesizing that the device noise was only due to Johnson noise. This implies that the quantum noise can be achieved with optimized YBCO dc-SQUIDS. We have designed a YBCO dc-SQUID with a cross section of junctions as small as 0.1 μm^2. It was predicted that the minimum intrinsic white energy resolution (E””'‘) should be about Planck's constant (h) at 4.2 K. The actual minimum eW, value of 1.76 x 10^-33 J/Hz = 2.7 h was obtained. This result demonstrates that E” '”of YBCO dc-SQUID s can be minimized to the order of h.
We have studied white (high-frequency)-noise properties of YBa2Cu3O7-δ grain-boundary dc superconducting quantum interference devices (SQUIDs). Bias voltage (V) dependence of the white-noise voltage spectral density (S v) was measured for dc-SQUIDs and junctions. As a result, S v at low bias voltage can be explained by the thermal noise theory of tunnel junctions. Furthermore, the energy resolution of 1.96×10-32 J/Hz is obtained at 43 K in the white-noise region. The measured energy resolution of the dc-SQUIDs is in good agreement with the theoretical results. According to the above results, YBa2Cu3O7-δ dc-SQUIDs with a quantum noise limit might be realized at 4.2 K.
We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.
We have studied low frequency (1/f) noise of YBa2Cu3O7−δ dc superconducting quantum interference devices (SQUIDs) on SrTiO3 bicrystal substrates. 1/f flux noise, either measured at different temperatures for optimized bias current or measured at 77 K for different bias currents, is almost constant. These facts imply that 1/f noise mainly comes from fluctuations of the critical current of the Josephson junction that form the SQUID. Also, we explain the critical current fluctuations in the junction by an equilibrium temperature fluctuation model.
Autonomous single-layer dc superconducting quantum interference devices (SQUIDs) have been prepared from epitaxial, laser-deposited YBa2Cu3Ox films on step edge SrTiO3 and LaAlO3 substrates. For device patterning, a SiOx inhibit technique as well as conventional ethylenediaminetetraacetic wet etch was used. The Josephson junctions are of grain boundary type. Their widths are 5 μm. The SQUID hole is a square of about 5 μm; the SQUID inductance is estimated to be about 20 pH. We obtained a very regular, nonhysteretic flux to voltage modulation over more than 100 flux quanta (Φ0). The maximum voltage signal is of the order of 15 μV peak to peak and the maximum transfer function dV/dΦ at the appropriate flux bias is 50 μV/Φ0 at 77 K. The best value of the equivalent flux noise as measured in the flux locked loop mode is 1.4×10−5 Φ0/Hz1/2 at 1 Hz and 1×10−5 Φ0/Hz1/2 in the white noise region for f≳5 Hz. This results in an energy resolution εn,w(f≳5 Hz)=1×10−29 J/Hz in the white noise region and 2×10−29 J/Hz at 1 Hz.
We describe the noise performance of thin-film YBa 2 Cu 3 O 7 RF SQUIDS fabricated on MgO substrates with single step-edge Josephson junctions. A substantial range of noise levels has been observed for devices having similar electrical parameters (inductance, critical current, RF frequency). The best devices have white-noise levels below 10 -4 phi 0 Hz -1/2 when operated at a frequency of 170-200 MHz and have 1/f noise corners of a few hertz. Measurements of the V RF versus L RF characteristics of one SQUID, indicate that intrinsic device noise dominates the measured total noise of these devices. The white noise of all devices exceeds the predictions of the theory of Kurkijarvi at al. by a large factor, apparently because of non-ideal behaviour of step-edge Josephson junctions.
We present electric noise measurements of nanoscale biepitaxial YBa2{}_{2}2​Cu3{}_{3}3​O${}_{7\ensuremath{-}\ensuremath{\delta}}$ (YBCO) Josephson junctions fabricated by two different lithographic methods. The first (conventional) technique defines the junctions directly by ion milling etching through an amorphous carbon mask. The second (soft patterning) method makes use of the phase competition between the superconducting YBCO (Y123) and the insulating Y2{}_{2}2​BaCuO5{}_{5}5​ (Y211) phase at the grain boundary interface on MgO (110) substrates. The voltage noise properties of the two methods are compared in this study. For all junctions (having a thickness of 100 nm and widths of 250--500 nm), we see a significant amount of individual charge traps. We have extracted an approximate value for the effective area of the charge traps from the noise data. From the noise measurements, we infer that the soft-patterned junctions with a grain-boundary (GB) interface manifesting a large ccc-axis tunneling component have a uniform barrier and a superconductor-insulator-superconductor (SIS) -like behavior. The noise properties of soft-patterned junctions having a GB interface dominated by transport parallel to the ababab planes are in accordance with a resonant tunneling barrier model. The conventionally patterned junctions, instead, have suppressed superconducting transport channels with an area much less than the nominal junction area. These findings are important for the implementation of nanosized Josephson junctions in quantum circuits.