Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/0608209 · Physical Review B

Selective coupling of superconducting charge qubits mediated by a tunable stripline cavity

Margareta Wallquist, Vitaly S. Shumeiko, Goran P. Wendin

Published Dec 15, 2006• 141 citations
arXivHTMLPDF

Abstract

We theoretically investigate selective coupling of superconducting charge qubits mediated by a superconducting stripline cavity with a tunable resonance frequency. The frequency control is provided by a flux-biased dc superconducting quantum interference device attached to the cavity. Selective entanglement of the qubit states is achieved by sweeping the cavity frequency through the qubit-cavity resonances. The circuit is able to accommodate several qubits and allows one to keep the qubits at their optimal points with respect to decoherence during the whole operation. We derive an effective quantum Hamiltonian for the basic, two-qubit-cavity system, and analyze appropriate circuit parameters. We present a protocol for performing Bell inequality measurements, and discuss a composite pulse sequence generating a universal control-phase gate.

DOI
10.1103/physrevb.74.224506

Related papers

Tunable Superconducting Cavity using Superconducting Quantum Interference Device Metamaterials

Samuel Kim, David B. Shrekenhamer, K. McElroy +2 more

Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.

Scientific Reports•Mar 15, 2019•13 citations

Tunable coupling scheme for implementing two-qubit gates on fluxonium qubits

Ilya N. Moskalenko, Ilya S. Besedin, Ilya A. Simakov +1 more

A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.

arXiv:2107.11550•Applied Physics Letters•Nov 8, 2021•40 citations

All-to-all connectivity via adiabatic ZZ interactions in a superconducting flux qubit processor

Elena Lupo, Nguyen H. Le, Eran Ginossar +1 more

Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below $10^{-4}$ over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.

arXiv:2611.12576•Nov 9, 2026•0 citations

Tunable and switchable coupling between two superconducting resonators

A. Baust, Eric A. Hoffmann, M. Haeberlein +16 more

We realize a device allowing for tunable and switchable coupling between two frequency-degenerate superconducting resonators mediated by an artificial atom. For the latter, we utilize a persistent current flux qubit. We characterize the tunable and switchable coupling in the frequency and time domains and find that the coupling between the relevant modes can be varied in a controlled way. Specifically, the coupling can be tuned by adjusting the flux through the qubit loop or by controlling the qubit population via a microwave drive. Our measurements allow us to find parameter regimes for optimal coupler performance and quantify the tunability range.

arXiv:1405.1969•Physical Review B•Jan 30, 2015•70 citations

Flux qubits in a planar circuit quantum electrodynamics architecture: Quantum control and decoherence

Jean-Luc Orgiazzi, C. Deng, David Layden +6 more

We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

arXiv:1407.1346•Physical review. B./Physical review. B•Mar 15, 2016•60 citations

Tunable Coupling of Superconducting Qubits

Alexandre Blais, Alec Maassen van den Brink, Alexandre M. Zagoskin

We study an LC circuit implemented using a current-biased Josephson junction (CBJJ) as a tunable coupler for superconducting qubits. By modulating the bias current, the junction can be tuned in and out of resonance and entangled with the qubits coupled to it. One can thus implement two-qubit operations by mediating entanglement. We consider the examples of CBJJ and charge-phase qubits. A simple recoupling scheme leads to a generalization to arbitrary qubit designs.

arXiv:cond-mat/0207112•Physical Review Letters•Mar 24, 2003•184 citations
We theoretically investigate selective coupling of superconducting charge qubits mediated by a superconducting stripline cavity with a tunable resonance frequency. The frequency control is provided by a flux-biased dc superconducting quantum interference device attached to the cavity. Selective entanglement of the qubit states is achieved by sweeping the cavity frequency through the qubit-cavity resonances. The circuit is able to accommodate several qubits and allows one to keep the qubits at their optimal points with respect to decoherence during the whole operation. We derive an effective quantum Hamiltonian for the basic, two-qubit-cavity system, and analyze appropriate circuit parameters. We present a protocol for performing Bell inequality measurements, and discuss a composite pulse sequence generating a universal control-phase gate.
Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.
A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.
Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below 10−410^{-4}10−4 over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.
We realize a device allowing for tunable and switchable coupling between two frequency-degenerate superconducting resonators mediated by an artificial atom. For the latter, we utilize a persistent current flux qubit. We characterize the tunable and switchable coupling in the frequency and time domains and find that the coupling between the relevant modes can be varied in a controlled way. Specifically, the coupling can be tuned by adjusting the flux through the qubit loop or by controlling the qubit population via a microwave drive. Our measurements allow us to find parameter regimes for optimal coupler performance and quantify the tunability range.
We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.