Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2107.11550 · Applied Physics Letters

Tunable coupling scheme for implementing two-qubit gates on fluxonium qubits

Ilya N. Moskalenko, Ilya S. Besedin, Ilya A. Simakov, Alexey Vladimirovich Ustinov

Published Nov 8, 2021• 40 citations
arXivHTMLPDF

Abstract

A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.

DOI
10.1063/5.0064800

Related papers

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•132 citations

Crosstalk in Multi-Qubit Fluxonium Architectures with Transmon Couplers

Martijn F. S. Zwanenburg, Christian Kraglund Andersen

In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below $10^{-4}$ by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.

quant-pharXiv:2603.09870•Physical Review Applied•Mar 11, 2026•7 citations

Anharmonic tunable coupler with inductively shunted transmon

Yu Feng Zhang, Lian-Lian Zhang, Shuang Xu

Abstract Inductively shunted transmon qubits(IST) have emerged as one of the most promising candidates for superconducting quantum computing, exhibiting remarkable resilience to both charge and flux noise as a qubit. In this work, we investigate, analytically and numerically, the potential of the IST as a coupler. Compared to the conventional transmon couplers, significant advantages due to the addition of an inductive shunt is revealed, and the unique flux-tunability makes it an ideal candidate for implementing coupling between two transmons. Moreover, a novel coupling circuit is investigated through numerical simulations, demonstrates high-contrast switching of qubit–qubit interactions under the control of an external flux, realizing a two-qubit controlled-Z (CZ) gate with an average fidelity above 99.99%.

Physica Scripta•Mar 13, 2025•0 citations

High-Fidelity, Frequency-Flexible Two-Qubit Fluxonium Gates with a Transmon Coupler

Leon Ding, Max Hays, Youngkyu Sung +16 more

We propose and demonstrate an architecture for fluxonium-fluxonium two-qubit gates mediated by transmon couplers (FTF, for fluxonium-transmon-fluxonium).Relative to architectures that exclusively rely on a direct coupling between fluxonium qubits, FTF enables stronger couplings for gates using noncomputational states while simultaneously suppressing the static controlled-phase entangling rate (ZZ) down to kilohertz levels, all without requiring strict parameter matching.Here, we implement FTF with a flux-tunable transmon coupler and demonstrate a microwave-activated controlled-Z (CZ) gate whose operation frequency can be tuned over a 2-GHz range, adding frequency allocation freedom for FTFs in larger systems.Across this range, state-of-the-art CZ gate fidelities are observed over many bias points and reproduced across the two devices characterized in this work.After optimizing both the operation frequency and the gate duration, we achieve peak CZ fidelities in the 99.85%-99.9%range.Finally, we implement model-free reinforcement learning of the pulse parameters to boost the mean gate fidelity up to 99.922% Æ 0.009%, averaged over roughly an hour between scheduled training runs.Beyond the microwave-activated CZ gate we present here, FTF can be applied to a variety of other fluxonium gate schemes to improve gate fidelities and passively reduce unwanted ZZ interactions.

arXiv:2304.06087•Physical Review X•Sep 25, 2023•180 citations

Extensible Fluxonium Architecture Using Tunable Couplers with Low Shunt Capacitance

Peng Zhao, Peng Xu, Zheng-Yuan Xue

Fluxonium qubits have demonstrated high-fidelity operations and long coherence times in small-scale systems, highlighting their promise for quantum computing. However, large-scale integration into a high-performance two-dimensional (2D) qubit array remains the central challenge for practical applications. In this work, we introduce an extensible architecture for scaling up fluxonium qubits in 2D grids. To address the key challenges, namely achieving controllable strong interaction and high connectivity for qubits featuring small shunting capacitors (footprints), we propose using low-shunt-capacitance couplers to enable tunable interactions between fluxonium qubits. When embedded into 2D square lattices, large couplings can be achieved even with relatively small coupling capacitances, thus enabling multiple connections with sufficient capacitance budget. We further propose coupler realizations based on generalized flux qubit circuits, specifically the quarton and the fluxonium, and demonstrate that both enable fast, high-fidelity gates with low spectator errors, while supporting multiple connections on 2D grids.

quant-pharXiv:2606.01647•Jun 2, 2026•2 citations

Microwave-activated controlled- Z gate for fixed-frequency fluxonium qubits

Konstantin Nesterov, Ivan Pechenezhskiy, Chen Wang +2 more

The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: When biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the qubit coherence and two-qubit interactions. Here, we describe a controlled-$Z$ gate for two fluxoniums connected either capacitively or inductively, with qubit transitions fixed near $500\phantom{\rule{3.33333pt}{0ex}}\mathrm{MHz}$. The gate is activated by a microwave drive at a resonance involving the second excited state. We estimate intrinsic gate fidelities over 99.9% with gate times below 100 ns.

arXiv:1802.03095•Physical Review A•Sep 24, 2018•38 citations
A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10−410^{-4}10−4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.
Abstract Inductively shunted transmon qubits(IST) have emerged as one of the most promising candidates for superconducting quantum computing, exhibiting remarkable resilience to both charge and flux noise as a qubit. In this work, we investigate, analytically and numerically, the potential of the IST as a coupler. Compared to the conventional transmon couplers, significant advantages due to the addition of an inductive shunt is revealed, and the unique flux-tunability makes it an ideal candidate for implementing coupling between two transmons. Moreover, a novel coupling circuit is investigated through numerical simulations, demonstrates high-contrast switching of qubit–qubit interactions under the control of an external flux, realizing a two-qubit controlled-Z (CZ) gate with an average fidelity above 99.99%.
We propose and demonstrate an architecture for fluxonium-fluxonium two-qubit gates mediated by transmon couplers (FTF, for fluxonium-transmon-fluxonium).Relative to architectures that exclusively rely on a direct coupling between fluxonium qubits, FTF enables stronger couplings for gates using noncomputational states while simultaneously suppressing the static controlled-phase entangling rate (ZZ) down to kilohertz levels, all without requiring strict parameter matching.Here, we implement FTF with a flux-tunable transmon coupler and demonstrate a microwave-activated controlled-Z (CZ) gate whose operation frequency can be tuned over a 2-GHz range, adding frequency allocation freedom for FTFs in larger systems.Across this range, state-of-the-art CZ gate fidelities are observed over many bias points and reproduced across the two devices characterized in this work.After optimizing both the operation frequency and the gate duration, we achieve peak CZ fidelities in the 99.85%-99.9%range.Finally, we implement model-free reinforcement learning of the pulse parameters to boost the mean gate fidelity up to 99.922% Æ 0.009%, averaged over roughly an hour between scheduled training runs.Beyond the microwave-activated CZ gate we present here, FTF can be applied to a variety of other fluxonium gate schemes to improve gate fidelities and passively reduce unwanted ZZ interactions.
Fluxonium qubits have demonstrated high-fidelity operations and long coherence times in small-scale systems, highlighting their promise for quantum computing. However, large-scale integration into a high-performance two-dimensional (2D) qubit array remains the central challenge for practical applications. In this work, we introduce an extensible architecture for scaling up fluxonium qubits in 2D grids. To address the key challenges, namely achieving controllable strong interaction and high connectivity for qubits featuring small shunting capacitors (footprints), we propose using low-shunt-capacitance couplers to enable tunable interactions between fluxonium qubits. When embedded into 2D square lattices, large couplings can be achieved even with relatively small coupling capacitances, thus enabling multiple connections with sufficient capacitance budget. We further propose coupler realizations based on generalized flux qubit circuits, specifically the quarton and the fluxonium, and demonstrate that both enable fast, high-fidelity gates with low spectator errors, while supporting multiple connections on 2D grids.
The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: When biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the qubit coherence and two-qubit interactions. Here, we describe a controlled-ZZZ gate for two fluxoniums connected either capacitively or inductively, with qubit transitions fixed near 500MHz500\phantom{\rule{3.33333pt}{0ex}}\mathrm{MHz}500MHz. The gate is activated by a microwave drive at a resonance involving the second excited state. We estimate intrinsic gate fidelities over 99.9% with gate times below 100 ns.