Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.12576

All-to-all connectivity via adiabatic ZZ interactions in a superconducting flux qubit processor

Elena Lupo, Nguyen H. Le, Eran Ginossar, Michael Stern

Published Nov 9, 2026• 0 citations
arXivHTMLPDF

Abstract

Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below $10^{-4}$ over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.

DOI
10.48550/arxiv.2611.12576

Related papers

Hardware-Efficient Microwave-Activated Tunable Coupling between Superconducting Qubits

Bradley K. Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

arXiv:2105.05384•Physical Review Letters•Nov 9, 2021•85 citations

Baseband Control of Superconducting Qubits with Shared Microwave Drives

Peng Zhao, Ruixia Wang, Mengjun Hu +4 more

Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.

arXiv:2211.06833•Physical Review Applied•May 15, 2023•13 citations

A cavity-mediated reconfigurable coupling scheme for superconducting qubits

Shinyoung Hwang, Sangyeon Lee, Eunjong Kim

Superconducting qubits have achieved remarkable progress in gate fidelity and coherence, yet their typical nearest-neighbor connectivity presents constraints for implementing complex quantum circuits. Here, we introduce a cavity-mediated coupling architecture in which a shared cavity mode, accessed through tunable qubit-cavity couplers, enables dynamically reconfigurable interactions between non-adjacent qubits. By selectively activating the couplers, we demonstrate that high-fidelity iSWAP and CZ gates can be performed within 50 ns with simulated coherent error below $10^{-4}$, while residual $ZZ$ interaction during idling remains below a few kilohertz. Extending to a four-qubit system, we also simulate gates between every qubit pair by selectively enabling the couplers with low qubit crosstalk. This approach provides a practical route toward enhanced interaction flexibility in superconducting quantum processors and may serve as a useful building block for devices that benefit from selective non-local coupling.

quant-pharXiv:2602.08869•Applied Physics Letters•Feb 10, 2026•0 citations

Hybrid Coupling Topology with Dynamic ZZ Suppression for Optimizing Circuit Depth during Runtime in Superconducting Quantum Processor

Uday Sannigrahi, Amlan Chakrabarti, Swapnil Saha +1 more

To reduce circuit depth when executing Quantum algorithms, it is necessary to maximize qubit connectivity on a near-term quantum processor. While addressing this, we also need to ensure high gate fidelity, suppression of unwanted ZZ cross-talk, a compact layout footprint, and minimal control hardware complexity to support scalability. In current superconducting quantum chips, fixed coupling is used as it is easier to scale, but it is limited by unwanted static ZZ interaction during single qubit operations, which degrades system performance. To overcome these challenges, we have introduced a first-of-its-kind hybrid tunable-coupling architecture that connects four fixed-frequency transmon qubits using a single coupler. This hybrid coupler uses off-resonant Stark drives to tune ZZ strength between qubit pairs. Experimentally backed simulation results indicate that our proposed hybrid design maximizes the qubit connectivity while reducing control overhead. This design achieves a near 20% reduction in circuit depth compared to IBM's Heavy-Hexagonal layout, showing its potential for scalability.

quant-pharXiv:2602.06812•Feb 9, 2026•0 citations

Fast Z Z -free entangling gates for superconducting qubits assisted by a driven resonator

Ziwen Huang, Tae-Yoon Kim, Tanay Roy +4 more

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static $ZZ$ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-$Z$ gates within 140 ns. Our architecture is not only $ZZ$-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.

arXiv:2311.01332•Physical Review Applied•Sep 4, 2024•8 citations

Remote Adiabatic Controlled-Z Gate between Distant Superconducting Qubits

Si-Yu Xu, Yi-Rong Jin, Wen-Gang Zhang +1 more

Direct entangling gates between spatially separated qubits are a key capability for modular quantum computing. They enable nonlocal quantum circuits to be executed across different processor modules, thereby alleviating single-chip scaling constraints and expanding the effective connectivity of the system. Here, we propose and numerically investigate a remote adiabatic controlled-Z gate between two frequency-tunable superconducting qubits connected by a multi-mode coaxial cable. The cable-mediated interaction enables the gate to be implemented without additional tunable couplers, preserving a simple circuit architecture. For a 30-cm cable, simulations incorporating ten standing-wave modes yield an optimized gate infidelity of $4.71\times10^{-7}$ with a duration of 376.7 ns in the absence of decoherence. The gate maintains high fidelity under qubit-frequency fluctuations and millimeter-scale cable-length variations. Calculations for 50- and 100-cm cable situations demonstrate its potential for even larger cryogenic systems. These results provide a promising approach to extending high-fidelity quantum operations beyond individual chips and toward scalable, interconnected superconducting quantum processors.

quant-pharXiv:2609.18081•Chinese Physics B•Sep 17, 2026•1 citation
Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below 10−410^{-4}10−4 over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.
Superconducting qubits have achieved remarkable progress in gate fidelity and coherence, yet their typical nearest-neighbor connectivity presents constraints for implementing complex quantum circuits. Here, we introduce a cavity-mediated coupling architecture in which a shared cavity mode, accessed through tunable qubit-cavity couplers, enables dynamically reconfigurable interactions between non-adjacent qubits. By selectively activating the couplers, we demonstrate that high-fidelity iSWAP and CZ gates can be performed within 50 ns with simulated coherent error below 10−410^{-4}10−4, while residual ZZZZZZ interaction during idling remains below a few kilohertz. Extending to a four-qubit system, we also simulate gates between every qubit pair by selectively enabling the couplers with low qubit crosstalk. This approach provides a practical route toward enhanced interaction flexibility in superconducting quantum processors and may serve as a useful building block for devices that benefit from selective non-local coupling.
To reduce circuit depth when executing Quantum algorithms, it is necessary to maximize qubit connectivity on a near-term quantum processor. While addressing this, we also need to ensure high gate fidelity, suppression of unwanted ZZ cross-talk, a compact layout footprint, and minimal control hardware complexity to support scalability. In current superconducting quantum chips, fixed coupling is used as it is easier to scale, but it is limited by unwanted static ZZ interaction during single qubit operations, which degrades system performance. To overcome these challenges, we have introduced a first-of-its-kind hybrid tunable-coupling architecture that connects four fixed-frequency transmon qubits using a single coupler. This hybrid coupler uses off-resonant Stark drives to tune ZZ strength between qubit pairs. Experimentally backed simulation results indicate that our proposed hybrid design maximizes the qubit connectivity while reducing control overhead. This design achieves a near 20% reduction in circuit depth compared to IBM's Heavy-Hexagonal layout, showing its potential for scalability.
Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static ZZZZZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-ZZZ gates within 140 ns. Our architecture is not only ZZZZZZ-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.
Direct entangling gates between spatially separated qubits are a key capability for modular quantum computing. They enable nonlocal quantum circuits to be executed across different processor modules, thereby alleviating single-chip scaling constraints and expanding the effective connectivity of the system. Here, we propose and numerically investigate a remote adiabatic controlled-Z gate between two frequency-tunable superconducting qubits connected by a multi-mode coaxial cable. The cable-mediated interaction enables the gate to be implemented without additional tunable couplers, preserving a simple circuit architecture. For a 30-cm cable, simulations incorporating ten standing-wave modes yield an optimized gate infidelity of 4.71×10−74.71\times10^{-7}4.71×10−7 with a duration of 376.7 ns in the absence of decoherence. The gate maintains high fidelity under qubit-frequency fluctuations and millimeter-scale cable-length variations. Calculations for 50- and 100-cm cable situations demonstrate its potential for even larger cryogenic systems. These results provide a promising approach to extending high-fidelity quantum operations beyond individual chips and toward scalable, interconnected superconducting quantum processors.