Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.
Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.
Entanglement and correlation of quantum light can enhance LiDAR sensitivity in the presence of strong background noise. However, the power of such quantum sources is fundamentally limited to a stream of single photons and cannot compete with the detection range of high-power classical LiDAR transmitters. To circumvent this, we develop and demonstrate a quantum-inspired LiDAR prototype based on coherent measurement of classical time-frequency correlation. This system uses a high-power classical source and maintains the high noise rejection advantage of quantum LiDARs. In particular, we show that it can achieve over 100dB rejection (with 100ms integration time) of indistinguishable (with statistically identical properties in every degree of freedom) in-band noise while still being sensitive to single photon signals. In addition to the LiDAR demonstration, we also discuss the potential of the proposed LiDAR receiver for quantum information applications. In particular, we propose the chaotic quantum frequency conversion technique for coherent manipulation of high dimensional quantum states of light. It is shown that this technique can provide improved performance in terms of selectivity and efficiency as compared to pulse-based quantum frequency conversion.
Quantum metrology leverages quantum resources to surpass classical limits in measurement sensitivity, enabling new capabilities across fields ranging from fundamental physics to sensing, imaging, and navigation. As these techniques mature, an increasing emphasis is being placed on translating quantum-enhanced performance into practical, robust systems that can operate outside controlled laboratory environments. The overarching objective of the work presented in this dissertation is to develop sensing platforms that achieve improved performance by leveraging quantum resources in realistic, noisy environments. In particular, this work focuses on the use of squeezed states of light, and investigates how two-mode squeezed states generated through four-wave mixing can be developed into compact sources and integrated with practical fiber-optic and plasmonic sensing platforms. Squeezed states of light, and in particular two-mode squeezed states (twin beams), constitute a powerful resource in quantum metrology. Their reduced quantum noise enables measurements below the noise level that can be achieved with classical resources, know as the shot-noise limit, offering genuine quantum advantages in precision sensing and measurement. Beyond their fundamental interest, such states provide a pathway toward practical quantum technologies capable of outperforming classical approaches in real-world applications. For many practical implementations, it is therefore highly advantageous to demonstrate squeezed light sources that are compact, stable, and compatible with existing photonic infrastructures. This is needed to lower the barrier to incorporate quantum resources into experiments and sensing platforms, particularly in environments where bulky or delicate optical setups are impractical. To demonstrate a pathway toward practical quantum sensing with squeezed light, this dissertation presents experimental studies spanning both the development of deployable squeezed-light sources and their application in practical or real-world sensing platforms. We present the development of a compact, narrowband, fiber-coupled source of squeezed light based on four-wave mixing in hot Rb 85 vapor. The system achieves more than 4 dB of intensity-difference squeezing after propagation through polarization-maintaining fibers, demonstrating that strong quantum correlations can be preserved even when fiber coupled. This platform serves as a standalone proof-of-principle demonstration of a deployable, low–size, weight, and power (low-SWaP) squeezed-light source that is well suited for applications where fiber delivery of quantum-correlated light can be readily integrated into existing experimental and sensing platforms. In addition to this source development, the dissertation investigates two distinct applications of twin-beam for quantum-enhanced sensing. The first one focuses on fiber Bragg grating (FBG) sensors, which are widely used to monitor strain, vibration, and temperature in applications ranging from civil infrastructure and aerospace systems to oil and gas pipeline monitoring. By coupling the squeezed light into separate FBGs and employing differential detection, common-mode noise is suppressed while localized perturbations are retained. This work provides a feasibility study for using twin-beams to enhance the sensitivity of FBG-based sensors beyond classical limits while providing robustness against environmental noise. The second application examines plasmonic sensors based on surface plasmon resonances in metallic nanostructures, which enable highly sensitive detection of small changes in refractive index. Such plasmonic sensors are particularly useful for applications in chemical and biological sensing, environmental monitoring, and lab-on-chip platforms, where compactness and high sensitivity to refractive index changes are critical. A dual-probing scheme is introduced in which both beams of a two-mode squeezed state interact with a polarization-dependent plasmonic nanostructure. By exploiting opposite spectral response for orthogonal polarizations, this approach improves measurement sensitivity relative to our previous technique of using one beam to probe the plasmonic sensor and the other to serve as a reference. This new technique takes advantage of transducing information into both the beams while preserving the benefits of differential detection for noise cancellation. Taken together, these studies illustrate complementary approaches for leveraging quantum correlations for practical sensing problems. Through the development of a compact, fiber-compatible squeezed-light source and independent demonstrations of enhanced performance in both fiber-optic and plasmonic sensors, this dissertation advances pathways for translating quantum sensing approaches based on quantum states of light from laboratory demonstrations into deployable metrology tools.
Quantum resources such as squeezed and entangled states of light provide a pathway to surpass classical sensitivity limits in measurement and information processing. This thesis presents the development and application of engineered squeezed light sources across both bulk and integrated photonic platforms, demonstrating their utility in advancing quantum-enhanced metrology for spectroscopy and inertial sensing. In the first experimental platform, I introduce entangled dual-comb spectroscopy (EDCS), which integrates squeezed light with dual-comb architectures. By exploiting entanglement across comb lines, EDCS circumvents the shot-noise limitations of classical dual-comb spectroscopy. My experiment demonstrate a 2.6 dB improvement in signal-to-noise ratio and a 1.7-fold reduction in integration time, establishing EDCS as a powerful tool for rapid and precise chemical and biological sensing. The second platform applies squeezed light to resonant fiber optic gyroscopes (RFOGs), where quantum fluctuations typically impose a fundamental noise floor. By injecting bright amplitude-squeezed light into the resonator, I achieve a 2 dB reduction in detector noise, verified via Allan deviation analysis. This quantum-enhanced RFOG architecture shows that squeezed light can improve sensitivity under practical operational conditions, paving the way for next-generation inertial navigation systems. Finally, I demonstrate the on-chip generation of squeezed light using silicon nitride photonic circuits. Thin-film devices achieve more than 2 dB of quadrature squeezing with excellent agreement between experiment and theory, while wafer-scale thick-film devices yield reproducible 3 dB squeezing across multiple dies with sub-0.2 dB variation. These results establish silicon nitride as a CMOS-compatible platform for scalable and manufacturable quantum light sources, offering a route toward robust, large-scale quantum photonic technologies. Together, these results bridge the gap between laboratory demonstrations and deployable quantum-enhanced measurement systems. By advancing both free-space and integrated implementations of squeezed light, this work provides foundational steps toward practical quantum technologies for precision navigation, spectroscopy, and information processing.
Quantum enhanced optical target detection provides a unique route to increased noise resilience of classical LiDARs (laser imaging, detection, and ranging) by using time correlation of non-classical photon pairs. Such enhancement is dictated by the detector temporal uncertainty that is typically orders of magnitude larger than the intrinsic correlation time. To circumvent such detector limitation, we explore the possibility of measuring correlation in the fractional-order Fourier domain (FrFD), which can be realized with the non-local dispersion cancellation. Experimentally, we verify this principle using a fiber-coupled waveguide source of photon pairs, showing enhanced noise rejection as compared with conventional time-domain coincidence detection and classical intensity detection. For false alarm rates of 10 −9 , an 89 dB improved detection rate is measured using receiver operating characteristics when comparing our FrFD protocol with classical intensity detection. Additionally, we discussed the resilience of FrFD correlation against intentionally prepared counterfeit signal photons. The possibility enabled by measuring correlation in the FrFD should also provide potential benefit for various sensing and communication protocols that relies on coincidence detection.
Without light, there would be no sight. Light acts as a probe in various measurement techniques ranging from imaging to spectroscopy, from small scale cantilever displace- ment measurement in atomic force microscopy to large scale mirror motion in interfer- ometry, light detection and ranging (LIDAR) and many other fields. As the light probe intensity rises, it not only allows reducing the background noise effect, but it also aids precision to the measurement by reducing the photon noise (shot-noise) contribution. However, increasing intensity beyond certain threshold level is not always advantageous for ultra sensitive measurements. For example in the detection of gravitational waves, the current power circulating in the large scale interferometers can not be increased further without introducing other noise sources like thermal effects on the mirrors, un- wanted scattered photons, and back action due to radiation pressure. In the imaging of delicate photo sensitive sample, high power can causes cell damage or it may lead to disturb the regular process under investigation, viz. favouring certain biochemical reaction, which do not correspond to natural in vitro behaviour. At low intensity, pho- ton noise is an important concern and quantum states of light with correlated photon fluctuation can ideally represent a fruitful way to build specific measurement strategies to surpass the limitation of standard approach based on classical light sources, offering an avenue of solutions for ultra sensitive measurements. This thesis work focuses on two application of quantum enhanced measurement strate- gies. The first part of the thesis work has been dedicated to the realization of the first wide-field microscope with Sub Shot Noise (SSN) sensitivity. This is based on the ex- ploitation of quantum correlations in the Squeezed Vacuum state. In the second part, the investigations have made on the role of the quantum correlated beams in an unusual interferometric scheme, in which two identical optical interferometers are subject to the same phase fluctuation. The scheme, in the classical regime, has been already imple- mented in a large scale experiment devoted to the search of possible quantum gravity (QG) effects at Fermilab.
The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.