Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum enhanced imaging and sensing with correlated light

Nigam Samantaray

Published Jan 1, 2017• 1 citation
OpenAlex

Abstract

Without light, there would be no sight. Light acts as a probe in various measurement techniques ranging from imaging to spectroscopy, from small scale cantilever displace- ment measurement in atomic force microscopy to large scale mirror motion in interfer- ometry, light detection and ranging (LIDAR) and many other fields. As the light probe intensity rises, it not only allows reducing the background noise effect, but it also aids precision to the measurement by reducing the photon noise (shot-noise) contribution. However, increasing intensity beyond certain threshold level is not always advantageous for ultra sensitive measurements. For example in the detection of gravitational waves, the current power circulating in the large scale interferometers can not be increased further without introducing other noise sources like thermal effects on the mirrors, un- wanted scattered photons, and back action due to radiation pressure. In the imaging of delicate photo sensitive sample, high power can causes cell damage or it may lead to disturb the regular process under investigation, viz. favouring certain biochemical reaction, which do not correspond to natural in vitro behaviour. At low intensity, pho- ton noise is an important concern and quantum states of light with correlated photon fluctuation can ideally represent a fruitful way to build specific measurement strategies to surpass the limitation of standard approach based on classical light sources, offering an avenue of solutions for ultra sensitive measurements. This thesis work focuses on two application of quantum enhanced measurement strate- gies. The first part of the thesis work has been dedicated to the realization of the first wide-field microscope with Sub Shot Noise (SSN) sensitivity. This is based on the ex- ploitation of quantum correlations in the Squeezed Vacuum state. In the second part, the investigations have made on the role of the quantum correlated beams in an unusual interferometric scheme, in which two identical optical interferometers are subject to the same phase fluctuation. The scheme, in the classical regime, has been already imple- mented in a large scale experiment devoted to the search of possible quantum gravity (QG) effects at Fermilab.

Related papers

An application of quantum metrology: enhanced correlated interferometry

Siva T. Pradyumna

Quantum metrology is a research field that deals with enhancing the resolution or sensing capabilities of a system which is otherwise constrained by classical limits.Improvements in measurements have historically led to new scientific discoveries, the recent example being the gravitational wave detection.Thus, quantum metrology could be an avenue for enabling scientific breakthroughs.In the present thesis, I have reported a first feasibility test of quantum enhanced correlated phase interferometry.A result that, on one other hand, paves the way for developing a new field of quantum metrology and on the other hand, could be applied to the detection of fundamental stochastic noises such as Holographic noise, gravitational wave background or traces of primordial black holes.The experiment was performed injecting two types of quantum states, namely the squeezed states and a twin-beam like state, in a system consisting of two co-located power recycled Michelson interferometers.When two independent squeezed states were injected, we were able in detecting a faint test correlated phase signal with an amplitude several orders of magnitude below the shot noise limited sensitivity of a single interferometer.The joint sensitivity obtained for the double interferometric system with squeezed states injected was (3.21 ± 0.16) × 10 -17 m √ Hz around 13.5 MHz, in a few seconds of measurement time.The second phase of the experiment involved the injection of a bipartite quantum correlated state in the two interferometers.In this case, we have demonstrated a quantum advantage in detecting uncorrelated noise or difference in the two interferometers' signals enabled by the reduction of the noise in the output photo-current subtraction.

•Jun 14, 2019•0 citations

Enhancing Quantum Optical Sensing and Metrology using Correlation and Entanglement of Quantum and Classical Light

Liu Han

Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.

•Nov 1, 2024•0 citations

Quantum correlation measurements in interferometric gravitational-wave detectors

V. V. Frolov, S. Kandhasamy, K. Izumi +97 more

Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational-wave detectors, such as the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the quantum properties of light can be used to distinguish these noises using correlation techniques. Particularly, in the first part of the paper we show estimations of the coating thermal noise and gas phase noise, hidden below the quantum shot noise in the Advanced LIGO sensitivity curve. We also make projections on the observatory sensitivity during the next science runs. In the second part of the paper we discuss the correlation technique that reveals the quantum radiation pressure noise from the background of classical noises and shot noise. We apply this technique to the Advanced LIGO data, collected during the first science run, and experimentally estimate the quantum correlations and quantum radiation pressure noise in the interferometer.

Physical Review Letters•Apr 1, 2017•0 citations

Gravitational-wave detection beyond the quantum shot-noise limit : the integration of squeezed light in GEO 600

Emil Schreiber

The first detections of gravitational waves have opened an exciting new field of astronomy. One of the most fundamental limitations for the sensitivity of current and future interferometric gravitational-wave detectors is imposed by the quantum nature of light: Quantum vacuum fluctuations entering the interferometer through the readout port will contribute to the detection noise, at high frequencies in the form of shot noise and at low frequencies by radiation pressure noise. A promising way to reduce this quantum noise is the injection of squeezed states of light that have a lower uncertainty in one quadrature than the vacuum state. The GEO 600 gravitational-wave detector demonstrated the use of squeezed light in 2010 and it is now the first detector to routinely apply squeezing to improve its sensitivity beyond the limits set by classical quantum shot noise. This thesis details the practical aspects of long-term stable and efficient squeezed-light integration in a large-scale gravitational-wave detector. Imperfections that can limit the amount of observable non-classical noise improvement, such as optical losses and phase fluctuations, were studied in detail and methods for their mitigation were developed. Novel control schemes for the active stabilisation of the squeezed light field's phase and alignment were one main focus of the investigations. At the same time, important experience was gathered in the operation of the squeezed light source over long timescales. Over the course of the thesis work, improvements were implemented that significantly increased the performance of the squeezed-light application. Squeezing was injected with an overall duty cycle of 88%, reaching a noise reduction of up to 4.4 dB, corresponding to a 40% lowered shot-noise level. This work has firmly established the practical application of squeezing as a mature technology. The gained knowledge will directly inform the implementation of squeezed light for all future gravitational-wave detectors.

•Jan 1, 2018•3 citations

Quantum measurement of biology

Michael A. Taylor

This thesis reports the development of a quantum enhanced microparticle tracking technique, which applied to measurements within living cells, allowed the first demonstrations of both biological measurements beyond the quantum noise limit and quantum enhanced spatial resolution within biology. The sensitivity of any optical measurement is limited by noise which follows from quantization of the electromagnetic field. This thesis theoretically characterizes the resulting quantum limit on particle tracking precision; both in the limit of perfect measurements and for the measurements used in real experiments, and theoretically establishes an experimental strategy which could allow the quantum limit to be surpassed via the application of non-classical light. Further, a computational tool is developed which allows rapid characterization of particle tracking experiments, thus providing researchers the benefit of rigorous theoretical predictions without requiring detailed calculations. Following this, classical technologies are developed which can improve microparticle tracking sensitivity and which are enabling steps toward integration of non-classical light. An interferometric strategy is described whereby signal-to-noise is improved by removing unwanted light from the detector. An optical lock-in technique is developed which eliminates low-frequency noise, thus allowing quantum noise limited performance at low frequencies. This is a crucial requirement for quantum enhanced measurements, and can also improve precision in classical experiments. Dark-field illumination is also explored as a method to remove unwanted background light, and the optimal illumination angle is calculated for our intended experiments. These advances are then applied in the development of the first quantum enhanced particle tracking apparatus. Squeezed states of light are used to improve particle tracking precision by 2.7 dB, demonstrating quantum enhanced microscopy for the first time. This was applied to perform the first measurements of living systems with quantum enhanced precision. Naturally occurring lipid particles were tracked within the cytoplasm of Saccharomyces cerevisiae yeast cells, with squeezed light enhancing precision by 2.4 dB. The thermal motion of these particles could then be analyzed to infer the viscosity and elasticity of the local environment, with squeezed light allowing 64% faster observations, thus improving the sensitivity to dynamic biological changes. This experiment was then extended to spatially resolved quantum imaging, with lipid particles used as scanning probes in a technique called photonic force microscopy. The particles sample variations in the local environment with resolution limited by measurement precision rather than the diffraction limit. The use of squeezed light was found to enhance spatial resolution by 14% at an absolute resolution level of 10 nm, comparable to leading classical experiments. This was the first demonstration of both sub-diffraction limited resolution and quantum enhanced resolution in biology, and places practical applications of quantum imaging within reach. Finally, the future challenges and prospects of quantum enhanced particle tracking are outlined.n

•Jan 1, 2014•0 citations

Quantum Enhanced Optical Measurements: From Ultra-High Sensitivity in Absorption Measurements to Ghost Microscopy

Elena Losero, Ivano Ruo Berchera, Alessio Avella +2 more

Quantum enhanced optical measurement protocols aim at reducing the uncertainty in the estimation of some physical quantities of a system below the shot-noise limit, classically unavoidable. In particular when small number of photons is used the shot noise can be the main source of uncertainty, in these cases the use of quantum light is of great interest. Note that there are several situations where the number of photons in the probe can not be increased arbitrarily, as when fragile biological samples are under investigation. Two different imaging protocols are discussed in the following.

Italian Quantum Information Science Conference (IQIS)•Jul 25, 2019•0 citations
Without light, there would be no sight. Light acts as a probe in various measurement techniques ranging from imaging to spectroscopy, from small scale cantilever displace- ment measurement in atomic force microscopy to large scale mirror motion in interfer- ometry, light detection and ranging (LIDAR) and many other fields. As the light probe intensity rises, it not only allows reducing the background noise effect, but it also aids precision to the measurement by reducing the photon noise (shot-noise) contribution. However, increasing intensity beyond certain threshold level is not always advantageous for ultra sensitive measurements. For example in the detection of gravitational waves, the current power circulating in the large scale interferometers can not be increased further without introducing other noise sources like thermal effects on the mirrors, un- wanted scattered photons, and back action due to radiation pressure. In the imaging of delicate photo sensitive sample, high power can causes cell damage or it may lead to disturb the regular process under investigation, viz. favouring certain biochemical reaction, which do not correspond to natural in vitro behaviour. At low intensity, pho- ton noise is an important concern and quantum states of light with correlated photon fluctuation can ideally represent a fruitful way to build specific measurement strategies to surpass the limitation of standard approach based on classical light sources, offering an avenue of solutions for ultra sensitive measurements. This thesis work focuses on two application of quantum enhanced measurement strate- gies. The first part of the thesis work has been dedicated to the realization of the first wide-field microscope with Sub Shot Noise (SSN) sensitivity. This is based on the ex- ploitation of quantum correlations in the Squeezed Vacuum state. In the second part, the investigations have made on the role of the quantum correlated beams in an unusual interferometric scheme, in which two identical optical interferometers are subject to the same phase fluctuation. The scheme, in the classical regime, has been already imple- mented in a large scale experiment devoted to the search of possible quantum gravity (QG) effects at Fermilab.
Quantum metrology is a research field that deals with enhancing the resolution or sensing capabilities of a system which is otherwise constrained by classical limits.Improvements in measurements have historically led to new scientific discoveries, the recent example being the gravitational wave detection.Thus, quantum metrology could be an avenue for enabling scientific breakthroughs.In the present thesis, I have reported a first feasibility test of quantum enhanced correlated phase interferometry.A result that, on one other hand, paves the way for developing a new field of quantum metrology and on the other hand, could be applied to the detection of fundamental stochastic noises such as Holographic noise, gravitational wave background or traces of primordial black holes.The experiment was performed injecting two types of quantum states, namely the squeezed states and a twin-beam like state, in a system consisting of two co-located power recycled Michelson interferometers.When two independent squeezed states were injected, we were able in detecting a faint test correlated phase signal with an amplitude several orders of magnitude below the shot noise limited sensitivity of a single interferometer.The joint sensitivity obtained for the double interferometric system with squeezed states injected was (3.21 ± 0.16) × 10 -17 m √ Hz around 13.5 MHz, in a few seconds of measurement time.The second phase of the experiment involved the injection of a bipartite quantum correlated state in the two interferometers.In this case, we have demonstrated a quantum advantage in detecting uncorrelated noise or difference in the two interferometers' signals enabled by the reduction of the noise in the output photo-current subtraction.
Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.
Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational-wave detectors, such as the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the quantum properties of light can be used to distinguish these noises using correlation techniques. Particularly, in the first part of the paper we show estimations of the coating thermal noise and gas phase noise, hidden below the quantum shot noise in the Advanced LIGO sensitivity curve. We also make projections on the observatory sensitivity during the next science runs. In the second part of the paper we discuss the correlation technique that reveals the quantum radiation pressure noise from the background of classical noises and shot noise. We apply this technique to the Advanced LIGO data, collected during the first science run, and experimentally estimate the quantum correlations and quantum radiation pressure noise in the interferometer.
The first detections of gravitational waves have opened an exciting new field of astronomy. One of the most fundamental limitations for the sensitivity of current and future interferometric gravitational-wave detectors is imposed by the quantum nature of light: Quantum vacuum fluctuations entering the interferometer through the readout port will contribute to the detection noise, at high frequencies in the form of shot noise and at low frequencies by radiation pressure noise. A promising way to reduce this quantum noise is the injection of squeezed states of light that have a lower uncertainty in one quadrature than the vacuum state. The GEO 600 gravitational-wave detector demonstrated the use of squeezed light in 2010 and it is now the first detector to routinely apply squeezing to improve its sensitivity beyond the limits set by classical quantum shot noise. This thesis details the practical aspects of long-term stable and efficient squeezed-light integration in a large-scale gravitational-wave detector. Imperfections that can limit the amount of observable non-classical noise improvement, such as optical losses and phase fluctuations, were studied in detail and methods for their mitigation were developed. Novel control schemes for the active stabilisation of the squeezed light field's phase and alignment were one main focus of the investigations. At the same time, important experience was gathered in the operation of the squeezed light source over long timescales. Over the course of the thesis work, improvements were implemented that significantly increased the performance of the squeezed-light application. Squeezing was injected with an overall duty cycle of 88%, reaching a noise reduction of up to 4.4 dB, corresponding to a 40% lowered shot-noise level. This work has firmly established the practical application of squeezing as a mature technology. The gained knowledge will directly inform the implementation of squeezed light for all future gravitational-wave detectors.
This thesis reports the development of a quantum enhanced microparticle tracking technique, which applied to measurements within living cells, allowed the first demonstrations of both biological measurements beyond the quantum noise limit and quantum enhanced spatial resolution within biology. The sensitivity of any optical measurement is limited by noise which follows from quantization of the electromagnetic field. This thesis theoretically characterizes the resulting quantum limit on particle tracking precision; both in the limit of perfect measurements and for the measurements used in real experiments, and theoretically establishes an experimental strategy which could allow the quantum limit to be surpassed via the application of non-classical light. Further, a computational tool is developed which allows rapid characterization of particle tracking experiments, thus providing researchers the benefit of rigorous theoretical predictions without requiring detailed calculations. Following this, classical technologies are developed which can improve microparticle tracking sensitivity and which are enabling steps toward integration of non-classical light. An interferometric strategy is described whereby signal-to-noise is improved by removing unwanted light from the detector. An optical lock-in technique is developed which eliminates low-frequency noise, thus allowing quantum noise limited performance at low frequencies. This is a crucial requirement for quantum enhanced measurements, and can also improve precision in classical experiments. Dark-field illumination is also explored as a method to remove unwanted background light, and the optimal illumination angle is calculated for our intended experiments. These advances are then applied in the development of the first quantum enhanced particle tracking apparatus. Squeezed states of light are used to improve particle tracking precision by 2.7 dB, demonstrating quantum enhanced microscopy for the first time. This was applied to perform the first measurements of living systems with quantum enhanced precision. Naturally occurring lipid particles were tracked within the cytoplasm of Saccharomyces cerevisiae yeast cells, with squeezed light enhancing precision by 2.4 dB. The thermal motion of these particles could then be analyzed to infer the viscosity and elasticity of the local environment, with squeezed light allowing 64% faster observations, thus improving the sensitivity to dynamic biological changes. This experiment was then extended to spatially resolved quantum imaging, with lipid particles used as scanning probes in a technique called photonic force microscopy. The particles sample variations in the local environment with resolution limited by measurement precision rather than the diffraction limit. The use of squeezed light was found to enhance spatial resolution by 14% at an absolute resolution level of 10 nm, comparable to leading classical experiments. This was the first demonstration of both sub-diffraction limited resolution and quantum enhanced resolution in biology, and places practical applications of quantum imaging within reach. Finally, the future challenges and prospects of quantum enhanced particle tracking are outlined.n
Quantum enhanced optical measurement protocols aim at reducing the uncertainty in the estimation of some physical quantities of a system below the shot-noise limit, classically unavoidable. In particular when small number of photons is used the shot noise can be the main source of uncertainty, in these cases the use of quantum light is of great interest. Note that there are several situations where the number of photons in the probe can not be increased arbitrarily, as when fragile biological samples are under investigation. Two different imaging protocols are discussed in the following.