Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2308.00195 · Nature Communications

Compact all-fiber quantum-inspired LiDAR with over 100 dB noise rejection and single photon sensitivity

Han Liu, Changhao Qin, Georgios Papangelakis, Meng Lon Iu, Amr S. Helmy

Published Sep 2, 2023• 28 citations
arXivHTMLPDF

Abstract

Entanglement and correlation of quantum light can enhance LiDAR sensitivity in the presence of strong background noise. However, the power of such quantum sources is fundamentally limited to a stream of single photons and cannot compete with the detection range of high-power classical LiDAR transmitters. To circumvent this, we develop and demonstrate a quantum-inspired LiDAR prototype based on coherent measurement of classical time-frequency correlation. This system uses a high-power classical source and maintains the high noise rejection advantage of quantum LiDARs. In particular, we show that it can achieve over 100dB rejection (with 100ms integration time) of indistinguishable (with statistically identical properties in every degree of freedom) in-band noise while still being sensitive to single photon signals. In addition to the LiDAR demonstration, we also discuss the potential of the proposed LiDAR receiver for quantum information applications. In particular, we propose the chaotic quantum frequency conversion technique for coherent manipulation of high dimensional quantum states of light. It is shown that this technique can provide improved performance in terms of selectivity and efficiency as compared to pulse-based quantum frequency conversion.

DOI
10.1038/s41467-023-40914-6

Related papers

All-Fiber Quantum-Inspired LiDAR with >100dB Noise Rejection and Single Photon Sensitivity

Han Liu, Yutian Zhang, Georgios Papangelakis +1 more

We demonstrate a quantum-inspired LiDAR based on coherent detection of broadband optical phase correlations. It can effectively reduce in-band noise power by over 100dB while still achieving single photon sensitivity.

IEEE Photonics Conference•Nov 1, 2022•0 citations

Enhancing Quantum Optical Sensing and Metrology using Correlation and Entanglement of Quantum and Classical Light

Liu Han

Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.

•Nov 1, 2024•0 citations

Quantum LiDAR with non-local modulation

Xiao-Dong Fan, Zhong-Hua Ou, Yun-Ru Fan +13 more

Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 $\pm$ 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 $\pm\ 4{\ \mathrm{μm}}$. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.

quant-pharXiv:2606.27838•Jun 29, 2026•0 citations

Enhancing LiDAR performance using classical/quantum time-frequency correlations

Amr S. Helmy, Han Liu, Phillip S. Blakey

This work will describe methodologies founded on time-frequency correlation also offer inspiration for classical target detection protocols with significantly higher source power, thereby extending the detection range. Remarkably, classical correlated probe-reference light, despite appearing random and chaotic, can reconstruct sub-Hz level single-frequency SFG output. In contrast, uncorrelated noise light doesn't undergo SFG and is entirely rejected. Consequently, background noise can be effectively distinguished, leading to a rejection capability exceeding 100dB, while the SFG process achieves nearly 100% efficiency in converting true probe photons.

Quantum Computing, Communication, and Simulation•Mar 13, 2024•0 citations

Design and Performance Analysis of a Quantum-Illumination LiDAR System

Hawraa Slaiman, Sara Abou Chakra, Hassanein Rabah

Modern optical sensing systems, particularly LiDAR, play a central role in remote sensing and precision measurement. However, they face fundamental limits when operating in noisy and highly lossy environments. Quantum illumination has emerged as a promising approach to overcome these challenges by exploiting quantum correlations. This work presents the system design and performance analysis of a quantum illumination based LiDAR architecture operating at optical frequencies. The proposed system exploits entangled photon pairs generated through spontaneous parametric down conversion to enhance detection sensitivity and robustness under weak return conditions. A complete hardware oriented framework is developed, including the entanglement source, nonlinear crystal configuration, pump laser requirements, optical propagation path, quantum memory implementation, and a detection architecture based on quantum erasure Hong-Ou-Mandel interference. Practical realization using superconducting nanowire single photon detectors is discussed to enable high efficiency and low noise photon measurement. In addition, a system level link budget and noise analysis evaluates the impact of optical losses, atmospheric attenuation, turbulence, and detector imperfections on overall performance. The study highlights how quantum correlations can improve signal to noise performance compared with classical illumination strategies, particularly in low reflectivity and high background scenarios. The presented architecture provides a realistic framework for implementing quantum LiDAR systems and supports the development of next generation long range sensing technologies.

IEEE Middle East and North Africa Communications Conference (MENACOMM)•May 12, 2026•0 citations

A practical compact source of heralded single photons for a simple detection LIDAR

Mateusz P. Mrozowski, John Jeffers, Jonathan D. Pritchard

Optical quantum technologies such as quantum sensing, quantum cryptography and quantum computation all utilize properties of non-classical light, such as precise photon-number and entangled photon-pair states, to surpass technologies based on the classical light. A common route for obtaining heralded single photons is spontaneous four-wave mixing in optical fibers, allowing for a well-defined spatial mode, for high efficiency integration into optical fiber networks. These fibers are typically pumped using large, commercial, pulsed lasers requiring high-power (~10 W) pump lasers and are limited to ~MHz repetition rate. Here we propose a cost- efficient, compact and mobile alternative. Photon pairs at 660 nm and 960 nm will be created using four-wave mixing in commercial birefringent optical fiber, pumped using transform limited picosecond pulses with GHz repetition rates derived from a 785 nm CW laser diode using cavity-enhanced optical frequency comb generation. The pulses are predicted to have average power of 275 mW, a peak power of >40 W, and predicted photon yield of >2000 pairs detected per second. This design will be later utilized to implement a quantum illumination scheme based on a coincidence count between idler and signal photons -- instead of joint measurement between signal and idler. This will allow for quantum advantage over classic LIDAR without the requirement for maintaining an interferometric stability in free space.

arXiv:2109.02055•Quantum Communications and Quantum Imaging•Jul 30, 2021•1 citation
Entanglement and correlation of quantum light can enhance LiDAR sensitivity in the presence of strong background noise. However, the power of such quantum sources is fundamentally limited to a stream of single photons and cannot compete with the detection range of high-power classical LiDAR transmitters. To circumvent this, we develop and demonstrate a quantum-inspired LiDAR prototype based on coherent measurement of classical time-frequency correlation. This system uses a high-power classical source and maintains the high noise rejection advantage of quantum LiDARs. In particular, we show that it can achieve over 100dB rejection (with 100ms integration time) of indistinguishable (with statistically identical properties in every degree of freedom) in-band noise while still being sensitive to single photon signals. In addition to the LiDAR demonstration, we also discuss the potential of the proposed LiDAR receiver for quantum information applications. In particular, we propose the chaotic quantum frequency conversion technique for coherent manipulation of high dimensional quantum states of light. It is shown that this technique can provide improved performance in terms of selectivity and efficiency as compared to pulse-based quantum frequency conversion.
Quantum states of light play a pivotal role in pushing the boundaries of sensitivity and accuracy in optical sensing and metrology, surpassing the limitations of classical laser sources. This thesis explores the innovative approach of harnessing the unique correlation and entanglement properties of quantum light for two vital applications in the field: optical target detection and fiber optical sensing and metrology. In the first half of this thesis, we explore the possibilities of using time-frequency correlation and entanglement of quantum (and quantum-inspired) light sources to enhance the noise resilience of optical target detection. We present three optical target detection protocols based on different yet similar operational principles, and they correspondingly offer different quantum (or quantum-inspired) enhancements. First, it is shown that by characterizing the temporal correlation between entangled photons through temporal domain photon counting, the impact of uncorrelated background noise can be drastically reduced. Second, we show that in addition to temporal correlation, frequency correlation can also be simultaneously analyzed through the joint measurement of time-frequency entanglement. Theoretical analysis shows that, by doing so, twice as much noise resilience can be achieved as compared to using temporal correlation alone. Third, we show that the coherent optical receiver used in the previous protocol can also be used in classical LiDARs. Such a quantum-inspired LiDAR is capable of a larger detection range (with high-power classical sources) while retaining similar noise resilience enhancement (over 100 dB rejection of inband noise with a 100 ms integration time). In the second half of the thesis, we present a novel all-fiber-based squeezed light source based on travelling-wave optical parametric amplification. Its operational principle is inspired by the time-frequency entanglement properties of quantum photon pairs and the bichromatic local oscillator technique. We experimentally demonstrate over 5.05 dB shot noise reduction (detection limited) using balanced homodyne detection. We anticipate that its robust, all-fiber form factor can benefit practical fiber optical sensing and metrology applications, such as fiber optical gyroscopes and distributed fiber sensing.
Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 ±\pm± 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 ± 4 μm\pm\ 4{\ \mathrm{μm}}± 4 μm. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.
This work will describe methodologies founded on time-frequency correlation also offer inspiration for classical target detection protocols with significantly higher source power, thereby extending the detection range. Remarkably, classical correlated probe-reference light, despite appearing random and chaotic, can reconstruct sub-Hz level single-frequency SFG output. In contrast, uncorrelated noise light doesn't undergo SFG and is entirely rejected. Consequently, background noise can be effectively distinguished, leading to a rejection capability exceeding 100dB, while the SFG process achieves nearly 100% efficiency in converting true probe photons.
Modern optical sensing systems, particularly LiDAR, play a central role in remote sensing and precision measurement. However, they face fundamental limits when operating in noisy and highly lossy environments. Quantum illumination has emerged as a promising approach to overcome these challenges by exploiting quantum correlations. This work presents the system design and performance analysis of a quantum illumination based LiDAR architecture operating at optical frequencies. The proposed system exploits entangled photon pairs generated through spontaneous parametric down conversion to enhance detection sensitivity and robustness under weak return conditions. A complete hardware oriented framework is developed, including the entanglement source, nonlinear crystal configuration, pump laser requirements, optical propagation path, quantum memory implementation, and a detection architecture based on quantum erasure Hong-Ou-Mandel interference. Practical realization using superconducting nanowire single photon detectors is discussed to enable high efficiency and low noise photon measurement. In addition, a system level link budget and noise analysis evaluates the impact of optical losses, atmospheric attenuation, turbulence, and detector imperfections on overall performance. The study highlights how quantum correlations can improve signal to noise performance compared with classical illumination strategies, particularly in low reflectivity and high background scenarios. The presented architecture provides a realistic framework for implementing quantum LiDAR systems and supports the development of next generation long range sensing technologies.
Optical quantum technologies such as quantum sensing, quantum cryptography and quantum computation all utilize properties of non-classical light, such as precise photon-number and entangled photon-pair states, to surpass technologies based on the classical light. A common route for obtaining heralded single photons is spontaneous four-wave mixing in optical fibers, allowing for a well-defined spatial mode, for high efficiency integration into optical fiber networks. These fibers are typically pumped using large, commercial, pulsed lasers requiring high-power (~10 W) pump lasers and are limited to ~MHz repetition rate. Here we propose a cost- efficient, compact and mobile alternative. Photon pairs at 660 nm and 960 nm will be created using four-wave mixing in commercial birefringent optical fiber, pumped using transform limited picosecond pulses with GHz repetition rates derived from a 785 nm CW laser diode using cavity-enhanced optical frequency comb generation. The pulses are predicted to have average power of 275 mW, a peak power of >40 W, and predicted photon yield of >2000 pairs detected per second. This design will be later utilized to implement a quantum illumination scheme based on a coincidence count between idler and signal photons -- instead of joint measurement between signal and idler. This will allow for quantum advantage over classic LIDAR without the requirement for maintaining an interferometric stability in free space.