Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

Frequency Stabilization of a 421 NM Laser via Modulation Transfer Spectroscopy

Jie Miao, 祝传文, Jingming Chen, Haoqi Sun, Qiaohui Yang, Zhendong Chen, YuZheng Pang, Yuanchen Qi, Hanbo Xu, Duo Pan, Jingbiao Chen

Published May 1, 2026• 0 citations
Publisher

Abstract

Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the${ }^{87} \mathbf{R b}$atomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the$\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}$to$\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}$transition of${ }^{\mathbf{8 7}} \mathbf{R b}$. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of$7.8 \times 10^{-13}$at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.

DOI
10.1109/ifcs68110.2026.11738400

Related papers

Frequency Modulation Spectroscopy and Modulation Transfer Spectroscopy for Laser Stabilization to Rubidium Atomic Resonances

Jinni Wu, Ningxuan Zheng, Wenhui Li

We make a detailed comparison of frequency modulation spectroscopy (FMS) and modulation transfer spectroscopy (MTS) and of their applications in stabilizing laser frequency. In both FMS and MTS, intensity modulations of probe beam are observed in saturated absorption spectroscopy of 87Rb atoms. However, the two modulation profiles appear different due to their distinct origins. Demodulation gives rise to frequency discrimination spectra, which can serve as error signals for frequency locking. The optimal error signal of FMS has a larger linear slope but also a slanted baseline, in contrast to that of MTS. We apply FMS and MTS to stabilize two 780 nm external cavity diode lasers to D2 lines of 87Rb atoms. We measure laser linewidth and stability using beat notes of two independently locked lasers. A laser linewidth as narrow as 12.9 kHz is achieved in FMS locking, compared to 70.8 kHz in MTS locking. A laser stability at the level of 10−12 is reached in both schemes. Nevertheless, FMS locking offers a better short-term stability, whereas MTS locking yields a smaller long-term drift. Our investigation of FMS and MTS would be valuable for making a choice of these spectroscopy techniques for laser stabilization as well as other relevant applications.

Photonics•Oct 21, 2026•0 citations

Power-stabilized 3-W blue laser locked to the 420-nm transition in rubidium

Jia Zhang, Xiaolei Guan, Xun Gao +7 more

Using modulation transfer spectroscopy, we achieve the frequency stabilization of a high-power 3-W blue laser at the wavelength of 420 nm to the $\mathrm{Rb}$ $5{S}_{1/2}$--$6{P}_{3/2}$ transition. The in-loop frequency stability of this laser is $1.8\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}11}/\sqrt{\ensuremath{\tau}}$, reaching $1.7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}12}$ at 100 s and $7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}13}$ at 1000 s. An external power feedback loop is established using an acousto-optic modulator, employing the zeroth-order diffracted light for power stabilization, achieving an in-loop power stability of $1.0\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}6}$ at 1 s. Moreover, the continuous mode-hop free interval of this high-power laser can simultaneously cover the $5{S}_{1/2}$--$6{P}_{3/2}$ transitions of ${}^{85}\text{Rb}$ and ${}^{87}\text{Rb}$, with successful locking achieved for both isotopes, providing a comprehensive analysis of the $\mathrm{Rb}$ atomic transitions in the blue spectral region. As an application, this 3-W 420-nm laser with excellent power and frequency stabilities is used as a repumping source for diffuse laser cooling of ${}^{87}\text{Rb}$ atoms, realizing a one-meter-long cold-atom cloud. This paves the way for using blue-light cooling to realize a cold-$\mathrm{Rb}$-atom active optical clock. In addition, the ultrahigh-stability 420-nm laser also finds applications in various fields such as the Rydberg atom experiment, Bose-Einstein condensation, ultranarrow-bandwidth Faraday atomic filter, and so on.

Physical Review Applied•Sep 18, 2024•12 citations

Compact optical frequency standard based on a miniature cell using modulation transfer spectroscopy

Jiqing Lian, Qiaohui Yang, Tianyu Liu +8 more

This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.

Chinese Optics Letters•Jan 1, 2025•2 citations

Frequency Stabilization Technology of 1560 nm Fiber Laser Based on Rubidium Modulation Transfer Spectroscopy

Yang Bai, Jun Ruan, Dandan Liu +3 more

The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.

IEEE photonics journal•May 20, 2024•6 citations

Stabilizing 459 nm passive optical clock for pumping 1470 nm active optical clock

Haoyang Wu, Zhiqiang 智强 Wen 温, Chen Wang +4 more

Abstract Optical clocks with thermal atoms are characterized by compact size, simple structure, reduced weight, and low power consumption and have the potential for broad out-of-the-lab and commercial applications. Here, we demonstrate a 459 nm optical clock based on the 6S 1/2 –7P 1/2 transition in thermal 133 Cs atoms. Two methods, modulation transfer spectroscopy (MTS) and frequency modulation spectroscopy (FMS), are employed to stabilize the frequency of a 459 nm commercial laser to the atomic transition. The MTS-MTS and MTS-FMS beat-note measurements show short-term frequency stabilities of 3.7 × 10 − 13 / τ and 6.4 × 10 − 13 / τ , respectively, at the averaging time τ . The 459 nm passive optical clock further serves as the pump for an active 1470 nm optical clock based on the cavityless lasing. The resultant 1470 nm output power reaches over 10 μW and the pump-beam-induced light shift is estimated to be 2 π × 11 Hz with a fractional uncertainty of 2.4 × 10 −18 . These results demonstrate the feasibility of hybridizing passive and active optical clocks, providing a promising route toward compact multi-wavelength optical frequency standards.

Chinese Physics B•Aug 26, 2025•3 citations

Doppler-free modulation transfer spectroscopy of rubidium 52S1/2–62P1/2 transitions using a frequency-doubled diode laser blue-light source

Nobuhiko Ito

A frequency-doubled diode laser spectrometer in the blue-wavelength region with a continuous-frequency tuning range of up to ∼7 GHz has been developed, comprising a powerful fundamental light source based on a master/slave laser combination coupled with a KNbO3 crystal for second-harmonic generation in a power-enhancement cavity. It has been employed for the observation of saturated absorption spectra in 52S1/2–62P1/2 hyperfine transitions of atomic rubidium with the aid of a modulation transfer spectroscopic technique, and also the frequency stabilization to one of them has been demonstrated, suggesting the possibility of the establishment of a precision optical frequency marker in the blue range. A relative stability of better than 2.8×10−10 is estimated based on the locked error signal in the preliminary stabilization. With a further study of the frequency instability and uncertainty, in addition to supplementary improvements of apparatus, one may expect a realization of a stabilized laser in the blue-spectral domain. Details of the developed blue-light source are described and the demonstrated results of the rubidium spectroscopy are also described and discussed.

Review of Scientific Instruments•Jul 1, 2000•27 citations
Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the87Rb{ }^{87} \mathbf{R b}87Rbatomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the52S1/2\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}52S1/2​to62P1/2\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}62P1/2​transition of87Rb{ }^{\mathbf{8 7}} \mathbf{R b}87Rb. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of7.8×10−137.8 \times 10^{-13}7.8×10−13at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.
We make a detailed comparison of frequency modulation spectroscopy (FMS) and modulation transfer spectroscopy (MTS) and of their applications in stabilizing laser frequency. In both FMS and MTS, intensity modulations of probe beam are observed in saturated absorption spectroscopy of 87Rb atoms. However, the two modulation profiles appear different due to their distinct origins. Demodulation gives rise to frequency discrimination spectra, which can serve as error signals for frequency locking. The optimal error signal of FMS has a larger linear slope but also a slanted baseline, in contrast to that of MTS. We apply FMS and MTS to stabilize two 780 nm external cavity diode lasers to D2 lines of 87Rb atoms. We measure laser linewidth and stability using beat notes of two independently locked lasers. A laser linewidth as narrow as 12.9 kHz is achieved in FMS locking, compared to 70.8 kHz in MTS locking. A laser stability at the level of 10−12 is reached in both schemes. Nevertheless, FMS locking offers a better short-term stability, whereas MTS locking yields a smaller long-term drift. Our investigation of FMS and MTS would be valuable for making a choice of these spectroscopy techniques for laser stabilization as well as other relevant applications.
Using modulation transfer spectroscopy, we achieve the frequency stabilization of a high-power 3-W blue laser at the wavelength of 420 nm to the Rb\mathrm{Rb}Rb 5S1/25{S}_{1/2}5S1/2​--6P3/26{P}_{3/2}6P3/2​ transition. The in-loop frequency stability of this laser is $1.8\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}11}/\sqrt{\ensuremath{\tau}}$, reaching $1.7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}12}$ at 100 s and $7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}13}$ at 1000 s. An external power feedback loop is established using an acousto-optic modulator, employing the zeroth-order diffracted light for power stabilization, achieving an in-loop power stability of $1.0\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}6}$ at 1 s. Moreover, the continuous mode-hop free interval of this high-power laser can simultaneously cover the 5S1/25{S}_{1/2}5S1/2​--6P3/26{P}_{3/2}6P3/2​ transitions of 85Rb{}^{85}\text{Rb}85Rb and 87Rb{}^{87}\text{Rb}87Rb, with successful locking achieved for both isotopes, providing a comprehensive analysis of the Rb\mathrm{Rb}Rb atomic transitions in the blue spectral region. As an application, this 3-W 420-nm laser with excellent power and frequency stabilities is used as a repumping source for diffuse laser cooling of 87Rb{}^{87}\text{Rb}87Rb atoms, realizing a one-meter-long cold-atom cloud. This paves the way for using blue-light cooling to realize a cold-Rb\mathrm{Rb}Rb-atom active optical clock. In addition, the ultrahigh-stability 420-nm laser also finds applications in various fields such as the Rydberg atom experiment, Bose-Einstein condensation, ultranarrow-bandwidth Faraday atomic filter, and so on.
This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.
The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.
Abstract Optical clocks with thermal atoms are characterized by compact size, simple structure, reduced weight, and low power consumption and have the potential for broad out-of-the-lab and commercial applications. Here, we demonstrate a 459 nm optical clock based on the 6S 1/2 –7P 1/2 transition in thermal 133 Cs atoms. Two methods, modulation transfer spectroscopy (MTS) and frequency modulation spectroscopy (FMS), are employed to stabilize the frequency of a 459 nm commercial laser to the atomic transition. The MTS-MTS and MTS-FMS beat-note measurements show short-term frequency stabilities of 3.7 × 10 − 13 / τ and 6.4 × 10 − 13 / τ , respectively, at the averaging time τ . The 459 nm passive optical clock further serves as the pump for an active 1470 nm optical clock based on the cavityless lasing. The resultant 1470 nm output power reaches over 10 μW and the pump-beam-induced light shift is estimated to be 2 π × 11 Hz with a fractional uncertainty of 2.4 × 10 −18 . These results demonstrate the feasibility of hybridizing passive and active optical clocks, providing a promising route toward compact multi-wavelength optical frequency standards.
A frequency-doubled diode laser spectrometer in the blue-wavelength region with a continuous-frequency tuning range of up to ∼7 GHz has been developed, comprising a powerful fundamental light source based on a master/slave laser combination coupled with a KNbO3 crystal for second-harmonic generation in a power-enhancement cavity. It has been employed for the observation of saturated absorption spectra in 52S1/2–62P1/2 hyperfine transitions of atomic rubidium with the aid of a modulation transfer spectroscopic technique, and also the frequency stabilization to one of them has been demonstrated, suggesting the possibility of the establishment of a precision optical frequency marker in the blue range. A relative stability of better than 2.8×10−10 is estimated based on the locked error signal in the preliminary stabilization. With a further study of the frequency instability and uncertainty, in addition to supplementary improvements of apparatus, one may expect a realization of a stabilized laser in the blue-spectral domain. Details of the developed blue-light source are described and the demonstrated results of the rubidium spectroscopy are also described and discussed.