Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Optics Letters

Compact optical frequency standard based on a miniature cell using modulation transfer spectroscopy

Jiqing Lian, Qiaohui Yang, Tianyu Liu, Duo Pan, Jie Miao, Zhendong Chen, Jingming Chen, Chen Jiang, Lina Bai, Zhidong Liu, Jingbiao Chen

Published Jan 1, 2025• 2 citations
Publisher

Abstract

This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.

DOI
10.3788/col202523.041201

Related papers

Compact Optical Frequency Standard with MEMS Vapor Cells

Qiaohui Yang, Zhenyu Hu, Tianyu Liu +7 more

This work introduces an innovative optical frequency standard that leverages MEMS vapor cells to achieve exceptional stability. To attain these objectives, we have integrated the modulation transfer spectroscopy (MTS) technique, which not only ensures high stability but also contributes to minimal power consumption in a compact form factor. Employing MTS with a high signal-to-noise ratio and utilizing a full bandwidth, high-speed servo feedback, we have successfully stabilized the laser frequency at the hyperfine transitions of rubidium atomic lines within the MEMS vapor cell. Furthermore, after the laser is locked, there is a significant narrowing effect on the laser linewidth. The current specifications of our compact optical frequency standard include a frequency Allan deviation of 4.8E-13@1s and the laser linewidth of only 18 kHz.

European Frequency and Time Forum•Jun 25, 2024•0 citations

Compact optical frequency standard using a wafer-level MEMS vapor cell

Qiaohui Yang, Zhenyu Hu, Tian Liu +6 more

Atomic clocks represent the most advanced instruments for providing time-frequency standards, with increasing demand for designs that offer high frequency stability while minimizing size. Central to an atomic clock’s function is the atomic vapor cell, which serves as the quantum reference. Compared to traditional cells, wafer-level micro-electro-mechanical systems (MEMS) vapor cells enable cost-effective, scalable production and facilitate integration with silicon-based chips. In this work, we present a wafer-level MEMS vapor cell featuring an innovative silicon-glass-silicon transverse optical path structure. A single wafer is used to fabricate 24 identical atomic vapor cells, each with precise dimensions of 14 mm×14 mm×4.3 mm, ensuring scalability. We demonstrate an optical frequency standard that combines modulation transfer spectroscopy (MTS) with a MEMS vapor cell, featuring a compact design with excellent performance. This frequency standard achieves stability over averaging times of 1–400 s, with short-term stability of 2.6×10 −13 at 1 s and 5.1×10 −14 at 200 s. The laser linewidth is only 3.9 kHz, marking a substantial improvement over existing thermal standards, and opening potential applications in navigation, radar, and precision measurement. This work provides a crucial step toward the development of chip-scale optical clocks.

Photonics Research•Jun 12, 2025•10 citations

Compact 780 nm Rb Optical Frequency Standard on “Optical Cubes”

Qiaohui Yang, Tianyu Liu, Jiqing Lian +6 more

Atomic clock is currently the highest precision time frequency standard device, which is widely used in communication, positioning, navigation and other advanced fields. However, optical frequency standards often face problems such as huge volume, complex system and high cost, which greatly limit their application scenarios. Here we report a compact 780 nm Rb optical frequency standard on “optical cubes”, which can greatly reduce the volume and maintain high stability. Profit from the robust architecture of “optical cubes”, the physical volume of the optical frequency standard can be greatly reduced to 140 mm*140 mm*100 mm, which based on modulation transfer spectroscopy. The “optical cubes” are a concept that all optical components can be mounted on universal glass cubes. At present, the compact optical frequency standard’s frequency instability reached short-term stability of 7.2E-13@1s.

IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS)•Sep 22, 2024•0 citations

420 nm Rb optical frequency standard with short-term frequency stability below 2 × 10 −13

RenPing Sun, WeiHao Zhao, Yu Zhang +4 more

We experimentally study the character of saturated absorption spectroscopy (SAS) of the 87 Rb 5 S 1/2 → 6 P 3/2 transition at 420 nm in a miniature cubic glass cell (3 × 3 × 3 mm 3 ). The influences of the laser intensity and cell temperature on the saturated absorption resonance are comprehensively investigated to determine the optimal parameters for a compact stabilized frequency standard. By stabilizing the laser frequency to the optimized SAS signal, a beatnote stability of 2.4 × 10 −13 at 1 s is measured between two identical SAS systems, corresponding to a single-laser stability of 1.7 × 10 −13 at 1 s, assuming equal contribution from each laser. A further analysis of the noise budget reveals that the main contributions of short-term stability arise from the intermodulation effect and the laser frequency noise through the frequency modulation to amplitude modulation (FM-AM) conversion process. Our work provides a promising route toward high-performance miniaturized optical frequency standards based on high-lying excited-state transitions.

Optics Express•Jul 7, 2026•1 citation

Accuracy Evaluation of Optical Frequency Standard Based on Modulation Transfer Spectroscopy of the 87 Rb D2 Line Transition

Jeongju Choi, Sanglok Lee, Sang-Bum Lee +8 more

A precise absolute optical frequency reference is critical for deployable measurement systems that use lasers for the measurement of physical quantities, like quantum gravimeters. Conventionally, this requires the complexity and difficulty of either utilizing a complex optical frequency standard or calibrating the laser against another optical frequency standard. To overcome this, we present an independent evaluation of a standalone laser stabilized to the87Rb F=2→ F'=3 transition via modulation transfer spectroscopy. We systematically quantified and compensated for primary systematic effects, including residual Doppler, AC-Stark, and intrinsic cell shifts. Validation against literature values and a Yb optical clock confirmed that our MTS-stabilized laser achieves a fractional frequency uncertainty below 1×10-10. This approach provides a robust, highly practical solution for mobile atom interferometer-based applications.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations

Frequency Stabilization of a 421 NM Laser via Modulation Transfer Spectroscopy

Jie Miao, 祝传文, Jingming Chen +8 more

Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the${ }^{87} \mathbf{R b}$atomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the$\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}$to$\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}$transition of${ }^{\mathbf{8 7}} \mathbf{R b}$. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of$7.8 \times 10^{-13}$at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2026•0 citations
This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.
This work introduces an innovative optical frequency standard that leverages MEMS vapor cells to achieve exceptional stability. To attain these objectives, we have integrated the modulation transfer spectroscopy (MTS) technique, which not only ensures high stability but also contributes to minimal power consumption in a compact form factor. Employing MTS with a high signal-to-noise ratio and utilizing a full bandwidth, high-speed servo feedback, we have successfully stabilized the laser frequency at the hyperfine transitions of rubidium atomic lines within the MEMS vapor cell. Furthermore, after the laser is locked, there is a significant narrowing effect on the laser linewidth. The current specifications of our compact optical frequency standard include a frequency Allan deviation of 4.8E-13@1s and the laser linewidth of only 18 kHz.
Atomic clocks represent the most advanced instruments for providing time-frequency standards, with increasing demand for designs that offer high frequency stability while minimizing size. Central to an atomic clock’s function is the atomic vapor cell, which serves as the quantum reference. Compared to traditional cells, wafer-level micro-electro-mechanical systems (MEMS) vapor cells enable cost-effective, scalable production and facilitate integration with silicon-based chips. In this work, we present a wafer-level MEMS vapor cell featuring an innovative silicon-glass-silicon transverse optical path structure. A single wafer is used to fabricate 24 identical atomic vapor cells, each with precise dimensions of 14 mm×14 mm×4.3 mm, ensuring scalability. We demonstrate an optical frequency standard that combines modulation transfer spectroscopy (MTS) with a MEMS vapor cell, featuring a compact design with excellent performance. This frequency standard achieves stability over averaging times of 1–400 s, with short-term stability of 2.6×10 −13 at 1 s and 5.1×10 −14 at 200 s. The laser linewidth is only 3.9 kHz, marking a substantial improvement over existing thermal standards, and opening potential applications in navigation, radar, and precision measurement. This work provides a crucial step toward the development of chip-scale optical clocks.
Atomic clock is currently the highest precision time frequency standard device, which is widely used in communication, positioning, navigation and other advanced fields. However, optical frequency standards often face problems such as huge volume, complex system and high cost, which greatly limit their application scenarios. Here we report a compact 780 nm Rb optical frequency standard on “optical cubes”, which can greatly reduce the volume and maintain high stability. Profit from the robust architecture of “optical cubes”, the physical volume of the optical frequency standard can be greatly reduced to 140 mm*140 mm*100 mm, which based on modulation transfer spectroscopy. The “optical cubes” are a concept that all optical components can be mounted on universal glass cubes. At present, the compact optical frequency standard’s frequency instability reached short-term stability of 7.2E-13@1s.
We experimentally study the character of saturated absorption spectroscopy (SAS) of the 87 Rb 5 S 1/2 → 6 P 3/2 transition at 420 nm in a miniature cubic glass cell (3 × 3 × 3 mm 3 ). The influences of the laser intensity and cell temperature on the saturated absorption resonance are comprehensively investigated to determine the optimal parameters for a compact stabilized frequency standard. By stabilizing the laser frequency to the optimized SAS signal, a beatnote stability of 2.4 × 10 −13 at 1 s is measured between two identical SAS systems, corresponding to a single-laser stability of 1.7 × 10 −13 at 1 s, assuming equal contribution from each laser. A further analysis of the noise budget reveals that the main contributions of short-term stability arise from the intermodulation effect and the laser frequency noise through the frequency modulation to amplitude modulation (FM-AM) conversion process. Our work provides a promising route toward high-performance miniaturized optical frequency standards based on high-lying excited-state transitions.
A precise absolute optical frequency reference is critical for deployable measurement systems that use lasers for the measurement of physical quantities, like quantum gravimeters. Conventionally, this requires the complexity and difficulty of either utilizing a complex optical frequency standard or calibrating the laser against another optical frequency standard. To overcome this, we present an independent evaluation of a standalone laser stabilized to the87Rb F=2→ F'=3 transition via modulation transfer spectroscopy. We systematically quantified and compensated for primary systematic effects, including residual Doppler, AC-Stark, and intrinsic cell shifts. Validation against literature values and a Yb optical clock confirmed that our MTS-stabilized laser achieves a fractional frequency uncertainty below 1×10-10. This approach provides a robust, highly practical solution for mobile atom interferometer-based applications.
Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the87Rb{ }^{87} \mathbf{R b}87Rbatomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the52S1/2\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}52S1/2​to62P1/2\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}62P1/2​transition of87Rb{ }^{\mathbf{8 7}} \mathbf{R b}87Rb. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of7.8×10−137.8 \times 10^{-13}7.8×10−13at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.