Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Stabilizing 459 nm passive optical clock for pumping 1470 nm active optical clock

Haoyang Wu, Zhiqiang 智强 Wen 温, Chen Wang, Zhenfeng Liu, Jingbiao Chen, Shougang Zhang, Deshui Yu

Published Aug 26, 2025• 3 citations
Publisher

Abstract

Abstract Optical clocks with thermal atoms are characterized by compact size, simple structure, reduced weight, and low power consumption and have the potential for broad out-of-the-lab and commercial applications. Here, we demonstrate a 459 nm optical clock based on the 6S 1/2 –7P 1/2 transition in thermal 133 Cs atoms. Two methods, modulation transfer spectroscopy (MTS) and frequency modulation spectroscopy (FMS), are employed to stabilize the frequency of a 459 nm commercial laser to the atomic transition. The MTS-MTS and MTS-FMS beat-note measurements show short-term frequency stabilities of 3.7 × 10 − 13 / τ and 6.4 × 10 − 13 / τ , respectively, at the averaging time τ . The 459 nm passive optical clock further serves as the pump for an active 1470 nm optical clock based on the cavityless lasing. The resultant 1470 nm output power reaches over 10 μW and the pump-beam-induced light shift is estimated to be 2 π × 11 Hz with a fractional uncertainty of 2.4 × 10 −18 . These results demonstrate the feasibility of hybridizing passive and active optical clocks, providing a promising route toward compact multi-wavelength optical frequency standards.

DOI
10.1088/1674-1056/adfefa

Related papers

Mirrorless Laser as a Cavity-Pulling-Immune Active Optical Clock

Jia Zhang, Xun Gao, Xiaolei Guan +3 more

In this work, we demonstrate a continuous-wave 1470 nm mirrorless laser toward a cavity-pulling-immune active optical clock based on thermal cesium atoms. A frequency-stabilized 459 nm pump laser is used to excite Cs atoms from the$\mathbf{6} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}$ground state to the$\mathbf{7 P}_{\mathbf{1} / \mathbf{2}}$state, after which the atoms spontaneously decay to the$\mathbf{7 \mathbf { S } _ { \mathbf { 1 } } / \mathbf { 2}}$state and establish a population inversion between the$\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}$and$\mathbf{6 P}_{\mathbf{3} / \mathbf{2}}$levels. As a result, coherent 1470 nm emission associated with the$\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}} \boldsymbol{\rightarrow} \mathbf{6 P}_{\mathbf{3} \boldsymbol{/} \mathbf{2}}$atomic transition is generated through a traveling-wave amplification mirrorless laser mechanism without employing an optical cavity. The 459 nm pump laser is stabilized by modulation transfer spectroscopy to maintain efficient excitation and stable gain. The beat-note spectrum is fitted with a Lorentzian profile, yielding a linewidth of 278.3 kHz. Owing to the absence of cavity eigenmodes, the output frequency is intrinsically free from conventional cavity pulling. This mirrorless laser scheme may provide a new route for developing compact atomic-transition-referenced optical frequency sources and represents a promising configuration for future active optical clocks.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2026•0 citations

Prospects for an Active Optical Clock Based on Cavityless Lasing

Deshui Yu, Jia Zhang, Shougang Zhang +1 more

Abstract Active optical clocks take advantage of the substantial suppression of cavity pulling in the bad‐cavity lasing regime and feature the simple structure and excellent portability. In the extreme case, where the cavity mirror reflection approaches zero and cannot support any quasi‐bound modes for light waves, conventional bad‐cavity lasers become the cavityless lasing and the cavity pulling vanishes. Consequently, the laser frequency is determined entirely by the atomic transition. This work is dedicated to theoretically explore the potential application of the cavityless lasing in active optical clocks. Without loss of generality, Cs atoms with well‐established quantum control techniques are employed as the gain medium that is pumped by a 459‐nm laser. The clock laser wavelength is 1470 nm. The simulation shows that the frequency stability of the clock laser with feasible physical quantities reaches at 1 s of averaging time, one order of magnitude better than the recently demonstrated compact passive optical clocks that are built upon a two‐photon transition in a hot Rb vapor and upon the modulation transfer spectroscopy of thermal Cs atoms. Such compact cavityless lasing‐based active optical clocks have the broad application prospect in satellite navigation and communications and promise an architecture for the integrated photonic metrology.

Advanced Quantum Technologies•Dec 31, 2023•9 citations

Frequency Stabilization of a 421 NM Laser via Modulation Transfer Spectroscopy

Jie Miao, 祝传文, Jingming Chen +8 more

Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the${ }^{87} \mathbf{R b}$atomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the$\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}$to$\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}$transition of${ }^{\mathbf{8 7}} \mathbf{R b}$. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of$7.8 \times 10^{-13}$at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2026•0 citations

Preliminary Results of Active Optical Clock with Cavity-Length Stabilization

Tiantian Shi, Duo Pan, Jingbiao Chen

We have experimentally demonstrated the active optical clock with a good suppression to cavity-length noise compared with the passive one. However, the frequency stability of the four-level active optical clock for thermal atoms is still limited by the residual cavity-pulling effect. In this paper, we preliminarily realized the cavity-length stabilization in 1064/1470 nm dual-wavelength good-bad cavity system. The synchronous cavity-length change between two dual-wavelength systems is realized by using the phase locking technique of 1064 nm goodcavity lasers. Therefore, the beating linewidth of 1470 nm badcavity lasers will also be reduced considering that the 1064/1470 nm dual-wavelength lasers share the one cavity. The tracking accuracy of 1064 nm good-cavity lasers is better than 3×10-16at 1 s after phase-locking, and the linewidth of 1470 nm bad-cavity laser is reduced to 77 Hz. The linewidth of active optical frequency standard is still limited by the light shift, collision shift and Zeeman shift. The beating signal of magnetic sublevels corresponding to the Cs 1470 nm clock transition is observed under Zeeman effect. Further research is needed, such as, the design of vacuum chamber and magnetic shielding, to reduce the linewidth of the continuous 1470 nm active optical frequency standard.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2019•0 citations

A 780 nm optical frequency standard based on diffuse laser cooled 87Rb atoms

Xiaolei Guan, Jia Zhang, Xun Gao +3 more

We demonstrate an optical frequency standard by locking the output frequency of an external cavity diode laser to the 780 nm D2 transition of diffuse laser cooled 87Rb atoms using frequency modulation spectroscopy (FMS). A 50-cm-long cold atomic cloud is obtained within a ϕ 2 cm ×l 50 cm vacuum glass tube, featuring greater simplicity and reliability. By analyzing the impact of power and detuning of cooling and repumping lasers, and power of frequency-modulated laser on FMS based on cold atoms, we choose the optimal parameter and lock the laser frequency to the 87Rb 52S1/2 (F = 2) → 52P3/2 (F′ = 3) cycling transition. The cold-atom-based optical frequency standard achieves an in-loop frequency stability of 3.3 × 10−15 at 1 s, with peak-to-peak frequency fluctuations being less than 50 Hz within 6000 s. This represents the integration of cold atoms into an optical frequency standard utilizing FMS for frequency stabilization. In contrast to the common cold-atom optical frequency standards, our approach requires fewer lasers and eliminates the need for a complex and expensive Pound–Drever–Hall (PDH) system. Its low complexity makes it a promising candidate for development into a space cold-atom clock, promoting advancements in space science and navigational positioning. Additionally, it possesses great potential to serve as an absolute wavelength standard.

Applied Physics Letters•Jan 20, 2025•12 citations

Lasing and suppressed cavity-pulling effect of Cesium active optical clock

Zhichao Xu, Wei Zhuang, Jingbiao Chen

We experimentally demonstrate the collective emission behavior and suppressed cavity-pulling effect of four-level active optical clock with Cesium atoms. Thermal Cesium atoms in a glass cell velocity selective pumped with a 455.5 nm laser operating at 6S$_{1/2}$ to 7P$_{3/2}$ transition are used as lasing medium. Population inverted Cesium atoms between 7S$_{1/2}$ and 6P$_{3/2}$ levels are optical weakly coupled by a pair cavity mirrors working at deep bad-cavity regime with a finesse of 4.3, and the ratio between cavity bandwidth and gain bandwidth is approximately 45. With increased 455.5 nm pumping laser intensity, the output power of cesium active optical clock at 1469.9 nm from 7S$_{1/2}$ level to 6P$_{3/2}$ level shows a threshold and reach a power of 13 $μ$W. Active optical clock would dramatically improve the optical clock stability since the lasing frequency does not follow the cavity length variation exactly, but in a form of suppressed cavity pulling effect. In this letter the cavity pulling effect is measured using a Fabry-Perot interferometer (FPI) to be reduced by a factor of 38.2 and 41.4 as the detuning between the 1469.9 nm cavity length of the Cs active optical clock and the Cs 1469.9 nm transition is set to be 140.8 MHz and 281.6 MHz respectively. The mechanism demonstrated here is of great significance for new generation optical clocks and can be applied to improve the stability of best optical clocks by at least two orders of magnitude.

arXiv:1404.6021•Apr 24, 2014•7 citations
Abstract Optical clocks with thermal atoms are characterized by compact size, simple structure, reduced weight, and low power consumption and have the potential for broad out-of-the-lab and commercial applications. Here, we demonstrate a 459 nm optical clock based on the 6S 1/2 –7P 1/2 transition in thermal 133 Cs atoms. Two methods, modulation transfer spectroscopy (MTS) and frequency modulation spectroscopy (FMS), are employed to stabilize the frequency of a 459 nm commercial laser to the atomic transition. The MTS-MTS and MTS-FMS beat-note measurements show short-term frequency stabilities of 3.7 × 10 − 13 / τ and 6.4 × 10 − 13 / τ , respectively, at the averaging time τ . The 459 nm passive optical clock further serves as the pump for an active 1470 nm optical clock based on the cavityless lasing. The resultant 1470 nm output power reaches over 10 μW and the pump-beam-induced light shift is estimated to be 2 π × 11 Hz with a fractional uncertainty of 2.4 × 10 −18 . These results demonstrate the feasibility of hybridizing passive and active optical clocks, providing a promising route toward compact multi-wavelength optical frequency standards.
In this work, we demonstrate a continuous-wave 1470 nm mirrorless laser toward a cavity-pulling-immune active optical clock based on thermal cesium atoms. A frequency-stabilized 459 nm pump laser is used to excite Cs atoms from the6S1/2\mathbf{6} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}6S1/2​ground state to the7P1/2\mathbf{7 P}_{\mathbf{1} / \mathbf{2}}7P1/2​state, after which the atoms spontaneously decay to the7S1/2\mathbf{7 \mathbf { S } _ { \mathbf { 1 } } / \mathbf { 2}}7S1​/2state and establish a population inversion between the7S1/2\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}}7S1/2​and6P3/2\mathbf{6 P}_{\mathbf{3} / \mathbf{2}}6P3/2​levels. As a result, coherent 1470 nm emission associated with the7S1/2→6P3/2\mathbf{7} \mathbf{S}_{\mathbf{1} \boldsymbol{/} \mathbf{2}} \boldsymbol{\rightarrow} \mathbf{6 P}_{\mathbf{3} \boldsymbol{/} \mathbf{2}}7S1/2​→6P3/2​atomic transition is generated through a traveling-wave amplification mirrorless laser mechanism without employing an optical cavity. The 459 nm pump laser is stabilized by modulation transfer spectroscopy to maintain efficient excitation and stable gain. The beat-note spectrum is fitted with a Lorentzian profile, yielding a linewidth of 278.3 kHz. Owing to the absence of cavity eigenmodes, the output frequency is intrinsically free from conventional cavity pulling. This mirrorless laser scheme may provide a new route for developing compact atomic-transition-referenced optical frequency sources and represents a promising configuration for future active optical clocks.
Abstract Active optical clocks take advantage of the substantial suppression of cavity pulling in the bad‐cavity lasing regime and feature the simple structure and excellent portability. In the extreme case, where the cavity mirror reflection approaches zero and cannot support any quasi‐bound modes for light waves, conventional bad‐cavity lasers become the cavityless lasing and the cavity pulling vanishes. Consequently, the laser frequency is determined entirely by the atomic transition. This work is dedicated to theoretically explore the potential application of the cavityless lasing in active optical clocks. Without loss of generality, Cs atoms with well‐established quantum control techniques are employed as the gain medium that is pumped by a 459‐nm laser. The clock laser wavelength is 1470 nm. The simulation shows that the frequency stability of the clock laser with feasible physical quantities reaches at 1 s of averaging time, one order of magnitude better than the recently demonstrated compact passive optical clocks that are built upon a two‐photon transition in a hot Rb vapor and upon the modulation transfer spectroscopy of thermal Cs atoms. Such compact cavityless lasing‐based active optical clocks have the broad application prospect in satellite navigation and communications and promise an architecture for the integrated photonic metrology.
Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the87Rb{ }^{87} \mathbf{R b}87Rbatomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the52S1/2\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}52S1/2​to62P1/2\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}62P1/2​transition of87Rb{ }^{\mathbf{8 7}} \mathbf{R b}87Rb. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of7.8×10−137.8 \times 10^{-13}7.8×10−13at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.
We have experimentally demonstrated the active optical clock with a good suppression to cavity-length noise compared with the passive one. However, the frequency stability of the four-level active optical clock for thermal atoms is still limited by the residual cavity-pulling effect. In this paper, we preliminarily realized the cavity-length stabilization in 1064/1470 nm dual-wavelength good-bad cavity system. The synchronous cavity-length change between two dual-wavelength systems is realized by using the phase locking technique of 1064 nm goodcavity lasers. Therefore, the beating linewidth of 1470 nm badcavity lasers will also be reduced considering that the 1064/1470 nm dual-wavelength lasers share the one cavity. The tracking accuracy of 1064 nm good-cavity lasers is better than 3×10-16at 1 s after phase-locking, and the linewidth of 1470 nm bad-cavity laser is reduced to 77 Hz. The linewidth of active optical frequency standard is still limited by the light shift, collision shift and Zeeman shift. The beating signal of magnetic sublevels corresponding to the Cs 1470 nm clock transition is observed under Zeeman effect. Further research is needed, such as, the design of vacuum chamber and magnetic shielding, to reduce the linewidth of the continuous 1470 nm active optical frequency standard.
We demonstrate an optical frequency standard by locking the output frequency of an external cavity diode laser to the 780 nm D2 transition of diffuse laser cooled 87Rb atoms using frequency modulation spectroscopy (FMS). A 50-cm-long cold atomic cloud is obtained within a ϕ 2 cm ×l 50 cm vacuum glass tube, featuring greater simplicity and reliability. By analyzing the impact of power and detuning of cooling and repumping lasers, and power of frequency-modulated laser on FMS based on cold atoms, we choose the optimal parameter and lock the laser frequency to the 87Rb 52S1/2 (F = 2) → 52P3/2 (F′ = 3) cycling transition. The cold-atom-based optical frequency standard achieves an in-loop frequency stability of 3.3 × 10−15 at 1 s, with peak-to-peak frequency fluctuations being less than 50 Hz within 6000 s. This represents the integration of cold atoms into an optical frequency standard utilizing FMS for frequency stabilization. In contrast to the common cold-atom optical frequency standards, our approach requires fewer lasers and eliminates the need for a complex and expensive Pound–Drever–Hall (PDH) system. Its low complexity makes it a promising candidate for development into a space cold-atom clock, promoting advancements in space science and navigational positioning. Additionally, it possesses great potential to serve as an absolute wavelength standard.
We experimentally demonstrate the collective emission behavior and suppressed cavity-pulling effect of four-level active optical clock with Cesium atoms. Thermal Cesium atoms in a glass cell velocity selective pumped with a 455.5 nm laser operating at 6S1/2_{1/2}1/2​ to 7P3/2_{3/2}3/2​ transition are used as lasing medium. Population inverted Cesium atoms between 7S1/2_{1/2}1/2​ and 6P3/2_{3/2}3/2​ levels are optical weakly coupled by a pair cavity mirrors working at deep bad-cavity regime with a finesse of 4.3, and the ratio between cavity bandwidth and gain bandwidth is approximately 45. With increased 455.5 nm pumping laser intensity, the output power of cesium active optical clock at 1469.9 nm from 7S1/2_{1/2}1/2​ level to 6P3/2_{3/2}3/2​ level shows a threshold and reach a power of 13 μμμW. Active optical clock would dramatically improve the optical clock stability since the lasing frequency does not follow the cavity length variation exactly, but in a form of suppressed cavity pulling effect. In this letter the cavity pulling effect is measured using a Fabry-Perot interferometer (FPI) to be reduced by a factor of 38.2 and 41.4 as the detuning between the 1469.9 nm cavity length of the Cs active optical clock and the Cs 1469.9 nm transition is set to be 140.8 MHz and 281.6 MHz respectively. The mechanism demonstrated here is of great significance for new generation optical clocks and can be applied to improve the stability of best optical clocks by at least two orders of magnitude.