Data security on Long Range (LoRa) wireless networks is vulnerable to eavesdropping threats, necessitating a Physical Layer Security (PLS) approach based on Secret Key Generation (SKG). This study implements an SKG scheme utilizing Received Signal Strength Indicator (RSSI) values extracted in an indoor environment. The key generation process includes signal filtering using Discrete Cosine Transform (DCT) to extract slow fading profiles, 2-bit Modified Multibit (MMB) quantization, and Bose-Chaudhuri-Hocquenghem (BCH) information reconciliation. Based on the evaluation of an indoor test scenario (Lab 04.14) with 560 aligned data samples, the BCH mechanism functionally overcame channel noise, reducing the raw Bit Error Rate (BER) to 0.0000 and generating perfectly identical secret key bits between legitimate nodes. Furthermore, spatial vulnerability evaluations demonstrated the system’s effectiveness against passive eavesdropping. Although the eavesdropper (Eve) was placed in close physical proximity to the Relay node (2.5 meters), the signal correlation at Eve remained very low post-DCT filtering correlation coefficient ranging from 0.115 to 0.146. This proves a successful spatial decorrelation, wherein the eavesdropper’s multipath fading profile was entirely random and unrepresentative of the legitimate channel. Consequently, unauthorized parties completely failed to duplicate the secret keys, proving the system’s robust reliability and security for relay-based LoRa networks in indoor environments.
Data security on Long Range (LoRa) wireless networks is vulnerable to eavesdropping threats, necessitating a Physical Layer Security (PLS) approach based on Secret Key Generation (SKG). This study implements an SKG scheme utilizing Received Signal Strength Indicator (RSSI) values extracted in an indoor environment. The key generation process includes signal filtering using Discrete Cosine Transform (DCT) to extract slow fading profiles, 2-bit Modified Multibit (MMB) quantization, and Bose-Chaudhuri-Hocquenghem (BCH) information reconciliation. Based on the evaluation of an indoor test scenario (Lab 04.14) with 560 aligned data samples, the BCH mechanism functionally overcame channel noise, reducing the raw Bit Error Rate (BER) to 0.0000 and generating perfectly identical secret key bits between legitimate nodes. Furthermore, spatial vulnerability evaluations demonstrated the system’s effectiveness against passive eavesdropping. Although the eavesdropper (Eve) was placed in close physical proximity to the Relay node (2.5 meters), the signal correlation at Eve remained very low post-DCT filtering correlation coefficient ranging from 0.115 to 0.146. This proves a successful spatial decorrelation, wherein the eavesdropper’s multipath fading profile was entirely random and unrepresentative of the legitimate channel. Consequently, unauthorized parties completely failed to duplicate the secret keys, proving the system’s robust reliability and security for relay-based LoRa networks in indoor environments.
Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.
Physical-layer secret key generation (SKG) offers a lightweight security approach for resource-constrained Internet of Things (IoT) devices. However, most existing methods are designed for direct links and do not explicitly address relay-assisted LoRa networks. This paper presents LoRa-PRIME, an SKG framework that combines channel probing, Savitzky–Golay preprocessing, modified Adaptive Dual-Threshold Quantization (ADQ), Bose–Chaudhuri–Hocquenghem (BCH) reconciliation, Periodic Reversal for Keying (PRK) randomness enhancement, and SHA-256 privacy amplification. Experiments were conducted using real LoRa devices under indoor line-of-sight (LOS), indoor non-LOS, and outdoor non-LOS conditions. Savitzky–Golay filtering increased channel correlation (e.g., from 0.7595 to 0.8443 in indoor LOS), supporting reliable key extraction. The 4-bit modified ADQ achieved higher key agreement rates (up to 0.9745) and key generation rates (up to 33.04 bps) compared with Sky-Glow, while reducing key generation time to 7.75 s/key. PRK improved randomness quality, increasing the number of NIST-compliant keys from 4 to 14 in indoor LOS and showing similar improvements in other environments. Complexity analysis indicates approximately linear O(N)scalability, with more than 85% of execution time dominated by channel probing, while signal processing and cryptographic stages introduce minimal overhead. The measured energy consumption is 6.619 J per key, lower than several reported LoRa-based SKG implementations. These results suggest that LoRa-PRIME provides an efficient and practical SKG solution for relay-assisted LoRa IoT deployments.
Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.
The Secret Key Generation (SKG) scheme that exploits the reciprocity and uniqueness of wireless channel between two users plays a significant part in a new increasing distributed security system. The scheme performance can be distinguished based on the low value of Key disagreement Rate (KDR), the high value of Key Generation Rate (KGR), as well as the fulfillment of the NIST randomness standard. The previous SKG scheme has a high KDR due to a direct quantization of a measurement result of the Received Signal Strength (RSS). To overcome the above issue, we conduct a pre-processing of measurement result before quantization with the Kalman method. The pre-process is carried out to improve the channel reciprocity between two legitimate users with the objective to reduce the bit mismatch. Through an experiment, we propose a new quantization scheme called a Modified Multi-Bit (MMB) that uses a multi-bit system on every level of quantization. The test results show that the proposed combination of preprocessing and the MMB scheme has a better performance compared to the existing schemes in terms of KDR and KGR. The Secret Key generated by our scheme also fulfills the NIST randomness standard.
This paper aims to develop and evaluate a lightweight and secure Secret Key Generation (SKG) system for static multi-user indoor wireless communication using Received Signal Strength Indicator (RSSI) data. The proposed system integrates fading interpolation, 5-bit multi-bit quantization, Cascade reconciliation, and SHA-128 hashing for privacy amplification. Experiments were conducted at5m,15m, and 25 m in a star topology with three legitimate users and one eavesdropper. At 5 m and 15 m, the system achieved high Key Generation Rates (KGR) of13.96%and14.52%, with Bit Mismatch Rates (BMR) of 86.73 % and 86.02 %. Cascade reconciliation retained up to 4120 bits from 5000-bit sequences, and SHA-128 ensured all keys were compressed to 128 -bit. NIST testing confirmed strong randomness (entropy 0.93) for legitimate users, while eavesdropper entropy remained low (0.81-0.84). AES-128 encryption successfully decrypted messages for valid pairs and failed for Eve, confirming system security. These results highlight the system's potential for secure and scalable communication in indoor IoT environments.
The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.