Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Open Journal of the Communications Society

LoRa-PRIME: A Novel Secret Key Generation Framework Based on Periodic Bit Reversal and Modified Adaptive Quantization for Robust Cooperative Jamming LoRa Relay Networks

Ida Anisah, Suwadi Suwadi, Wirawan, Mike Yuliana

Published Jan 1, 2026• 2 citations
Publisher

Abstract

Physical-layer secret key generation (SKG) offers a lightweight security approach for resource-constrained Internet of Things (IoT) devices. However, most existing methods are designed for direct links and do not explicitly address relay-assisted LoRa networks. This paper presents LoRa-PRIME, an SKG framework that combines channel probing, Savitzky–Golay preprocessing, modified Adaptive Dual-Threshold Quantization (ADQ), Bose–Chaudhuri–Hocquenghem (BCH) reconciliation, Periodic Reversal for Keying (PRK) randomness enhancement, and SHA-256 privacy amplification. Experiments were conducted using real LoRa devices under indoor line-of-sight (LOS), indoor non-LOS, and outdoor non-LOS conditions. Savitzky–Golay filtering increased channel correlation (e.g., from 0.7595 to 0.8443 in indoor LOS), supporting reliable key extraction. The 4-bit modified ADQ achieved higher key agreement rates (up to 0.9745) and key generation rates (up to 33.04 bps) compared with Sky-Glow, while reducing key generation time to 7.75 s/key. PRK improved randomness quality, increasing the number of NIST-compliant keys from 4 to 14 in indoor LOS and showing similar improvements in other environments. Complexity analysis indicates approximately linear O(N)scalability, with more than 85% of execution time dominated by channel probing, while signal processing and cryptographic stages introduce minimal overhead. The measured energy consumption is 6.619 J per key, lower than several reported LoRa-based SKG implementations. These results suggest that LoRa-PRIME provides an efficient and practical SKG solution for relay-assisted LoRa IoT deployments.

DOI
10.1109/ojcoms.2026.3672889

Related papers

LoRa-LiSK: A Lightweight Shared Secret Key Generation Scheme for LoRa Networks

Aisha Kanwal Junejo, Fatma Benkhelifa, Boon Wong +1 more

Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.

IEEE Internet of Things Journal•Aug 6, 2021•57 citations

Implementation of Modified Multibit (MMB) in a Secret Key Generation Scheme for Relay-Based LoRa Networks in Indoor Environments

Sirril Fairuz Qolbi, Faridatun Nadziroh, Anang Budikarso +3 more

Data security on Long Range (LoRa) wireless networks is vulnerable to eavesdropping threats, necessitating a Physical Layer Security (PLS) approach based on Secret Key Generation (SKG). This study implements an SKG scheme utilizing Received Signal Strength Indicator (RSSI) values extracted in an indoor environment. The key generation process includes signal filtering using Discrete Cosine Transform (DCT) to extract slow fading profiles, 2-bit Modified Multibit (MMB) quantization, and Bose-Chaudhuri-Hocquenghem (BCH) information reconciliation. Based on the evaluation of an indoor test scenario (Lab 04.14) with 560 aligned data samples, the BCH mechanism functionally overcame channel noise, reducing the raw Bit Error Rate (BER) to 0.0000 and generating perfectly identical secret key bits between legitimate nodes. Furthermore, spatial vulnerability evaluations demonstrated the system’s effectiveness against passive eavesdropping. Although the eavesdropper (Eve) was placed in close physical proximity to the Relay node (2.5 meters), the signal correlation at Eve remained very low post-DCT filtering correlation coefficient ranging from 0.115 to 0.146. This proves a successful spatial decorrelation, wherein the eavesdropper’s multipath fading profile was entirely random and unrepresentative of the legitimate channel. Consequently, unauthorized parties completely failed to duplicate the secret keys, proving the system’s robust reliability and security for relay-based LoRa networks in indoor environments.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

Implementation of Secret Key Generation Scheme in LoRa-Based Smart Agriculture

Nayla Ainun Nisa, Mike Yuliana, Norma Ningsih

The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

Enhancing Key Generation Rate in LoRa-Based V2I Secret Key Generation Using Segment-Based Privacy Amplification

Muhammad Nizamudin Mahfud, Mike Yuliana, Weny Mistarika Rahmawati +2 more

Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

Enhancement of Physical Layer Security in LoRa Networks Using Optimal Key Generation

Physical Layer Security (PLS) uses channel parameters to generate secret keys to secure communications between legitimate users.However, implementing PLS on Long Range (LoRa) networks faces challenges such as low reciprocity, a trade-off between key disagreement and generation rates, and limited key randomness due to the many LoRa network implementations on fixed networks.This research introduced a new method for choosing optimal window lengths in Savitzky-Golay filters combined with modified SKYGlow quantizations, outperforming previous works that did not use optimal window lengths and used 4-ary quantization.Experimental results show a significant increase, with the key generation rate reaching 6.9537 bps and decreasing the key disagreement rate to 0.07827.Thus, generating a key of 128 bits takes only 18.4 s.This research significantly contributes to developing more reliable and secure SKG techniques on LoRa networks.

International journal of intelligent engineering and systems•Oct 25, 2024•5 citations

FineLorKey: An Efficient LoRa Physical-Layer Key Generation Scheme Utilizing Fine-Grained Channel Impulse Response

Jiangtao Wang, Aiqun Hu, Yanbing Chen +2 more

Physical layer key generation has emerged as a promising solution to secure communications in LoRa networks. However, existing LoRa-based key generation systems suffer from low efficiency and limited security due to their reliance on coarse-grained channel measurements. To overcome the limitation, this paper proposes FineLorKey, the first systematic physical layer key generation framework for LoRa that leverages fine-grained Channel Impulse Response (CIR). FineLorKey introduces a novel CIR extraction method tailored to LoRa Chirp Spread Spectrum (CSS) modulation. This method can be seamlessly integrated into the demodulation process without incurring additional computational overhead. Theoretical analysis demonstrates that the extracted CIR maintains high reliability under the low signal-to-noise ratio (SNR) conditions typical of LoRa environments. Furthermore, to address the dynamic SNR variations inherent in LoRa scenarios, this paper designs an SNR aware quantization scheme based on quantitative bit error rate analysis. The scheme dynamically adjusts the quantization order to maximize entropy extraction. Extensive experiments were conducted in diverse scenarios, including indoor and outdoor environments, line-of-sight and non-line-of-sight conditions, as well as both static and mobile settings. The results show that compared with RSSI-based methods, FineLorKey achieves a more than 10× improvement in key generation rate, reduces the key disagreement rate to below 5%, decreases channel information eavesdropping rate by over 60%, and exhibits strong robustness under large-scale deployment scenarios. These findings underscore the effectiveness and security of FineLorKey and mark a substantial advancement in wireless key generation for long-range, low-SNR wireless environments.

IEEE Internet of Things Journal•Dec 24, 2025•2 citations
Physical-layer secret key generation (SKG) offers a lightweight security approach for resource-constrained Internet of Things (IoT) devices. However, most existing methods are designed for direct links and do not explicitly address relay-assisted LoRa networks. This paper presents LoRa-PRIME, an SKG framework that combines channel probing, Savitzky–Golay preprocessing, modified Adaptive Dual-Threshold Quantization (ADQ), Bose–Chaudhuri–Hocquenghem (BCH) reconciliation, Periodic Reversal for Keying (PRK) randomness enhancement, and SHA-256 privacy amplification. Experiments were conducted using real LoRa devices under indoor line-of-sight (LOS), indoor non-LOS, and outdoor non-LOS conditions. Savitzky–Golay filtering increased channel correlation (e.g., from 0.7595 to 0.8443 in indoor LOS), supporting reliable key extraction. The 4-bit modified ADQ achieved higher key agreement rates (up to 0.9745) and key generation rates (up to 33.04 bps) compared with Sky-Glow, while reducing key generation time to 7.75 s/key. PRK improved randomness quality, increasing the number of NIST-compliant keys from 4 to 14 in indoor LOS and showing similar improvements in other environments. Complexity analysis indicates approximately linear O(N)scalability, with more than 85% of execution time dominated by channel probing, while signal processing and cryptographic stages introduce minimal overhead. The measured energy consumption is 6.619 J per key, lower than several reported LoRa-based SKG implementations. These results suggest that LoRa-PRIME provides an efficient and practical SKG solution for relay-assisted LoRa IoT deployments.
Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.
Data security on Long Range (LoRa) wireless networks is vulnerable to eavesdropping threats, necessitating a Physical Layer Security (PLS) approach based on Secret Key Generation (SKG). This study implements an SKG scheme utilizing Received Signal Strength Indicator (RSSI) values extracted in an indoor environment. The key generation process includes signal filtering using Discrete Cosine Transform (DCT) to extract slow fading profiles, 2-bit Modified Multibit (MMB) quantization, and Bose-Chaudhuri-Hocquenghem (BCH) information reconciliation. Based on the evaluation of an indoor test scenario (Lab 04.14) with 560 aligned data samples, the BCH mechanism functionally overcame channel noise, reducing the raw Bit Error Rate (BER) to 0.0000 and generating perfectly identical secret key bits between legitimate nodes. Furthermore, spatial vulnerability evaluations demonstrated the system’s effectiveness against passive eavesdropping. Although the eavesdropper (Eve) was placed in close physical proximity to the Relay node (2.5 meters), the signal correlation at Eve remained very low post-DCT filtering correlation coefficient ranging from 0.115 to 0.146. This proves a successful spatial decorrelation, wherein the eavesdropper’s multipath fading profile was entirely random and unrepresentative of the legitimate channel. Consequently, unauthorized parties completely failed to duplicate the secret keys, proving the system’s robust reliability and security for relay-based LoRa networks in indoor environments.
The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.
Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.
Physical Layer Security (PLS) uses channel parameters to generate secret keys to secure communications between legitimate users.However, implementing PLS on Long Range (LoRa) networks faces challenges such as low reciprocity, a trade-off between key disagreement and generation rates, and limited key randomness due to the many LoRa network implementations on fixed networks.This research introduced a new method for choosing optimal window lengths in Savitzky-Golay filters combined with modified SKYGlow quantizations, outperforming previous works that did not use optimal window lengths and used 4-ary quantization.Experimental results show a significant increase, with the key generation rate reaching 6.9537 bps and decreasing the key disagreement rate to 0.07827.Thus, generating a key of 128 bits takes only 18.4 s.This research significantly contributes to developing more reliable and secure SKG techniques on LoRa networks.
Physical layer key generation has emerged as a promising solution to secure communications in LoRa networks. However, existing LoRa-based key generation systems suffer from low efficiency and limited security due to their reliance on coarse-grained channel measurements. To overcome the limitation, this paper proposes FineLorKey, the first systematic physical layer key generation framework for LoRa that leverages fine-grained Channel Impulse Response (CIR). FineLorKey introduces a novel CIR extraction method tailored to LoRa Chirp Spread Spectrum (CSS) modulation. This method can be seamlessly integrated into the demodulation process without incurring additional computational overhead. Theoretical analysis demonstrates that the extracted CIR maintains high reliability under the low signal-to-noise ratio (SNR) conditions typical of LoRa environments. Furthermore, to address the dynamic SNR variations inherent in LoRa scenarios, this paper designs an SNR aware quantization scheme based on quantitative bit error rate analysis. The scheme dynamically adjusts the quantization order to maximize entropy extraction. Extensive experiments were conducted in diverse scenarios, including indoor and outdoor environments, line-of-sight and non-line-of-sight conditions, as well as both static and mobile settings. The results show that compared with RSSI-based methods, FineLorKey achieves a more than 10× improvement in key generation rate, reduces the key disagreement rate to below 5%, decreases channel information eavesdropping rate by over 60%, and exhibits strong robustness under large-scale deployment scenarios. These findings underscore the effectiveness and security of FineLorKey and mark a substantial advancement in wireless key generation for long-range, low-SNR wireless environments.