The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.
The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.
With the rise of connected vehicular networks, Vehicle-to-Vehicle (V2V) communication has become a fundamental enabler for intelligent transportation systems. However, the open nature of wireless channels introduces risks such as eavesdropping and key compromise. To address these issues, we propose a secure V2V communication scheme based on Physical Layer Key Generation (PLKG) using LoRa technology. The proposed system utilizes Received Signal Strength Indicator (RSSI) measurements between two moving vehicles as the entropy source. To improve the channel correlation, a Savitzky-Golay filter is applied as a preprocessing step. Adaptive multibit quantization is then used to convert the RSSI into binary sequences, followed by the Cascade algorithm for error reconciliation. To enhance randomness, privacy amplification is applied using universal hashing and SHA-1. Finally, the generated key is used for AES-128 encryption. The system is implemented on Raspberry Pi 4B using AcSiP EK-S76SXB and RAK2245 LoRa modules. Experimental validation was conducted in three movement scenarios firstly both vehicle move from opposite-direction at10km/hfor300meters, secondly both vehicle move at the same-direction at10km/hfor800meters, and lastly same as the second scenario but with different speed at20km/h. Results shown that the system achieves a reliable key generation rate (KGR) of up to 176075.73 bit/s while maintaining low computation time, demonstrating its feasibility for secure real-time V2V communication.
Secure communication is essential for agricultural edge-IoT systems operating on resource-constrained wireless devices.Most RSSI-based secret key generation (SKG) methods improve only individual stages of the keygeneration pipeline and are rarely evaluated under realistic outdoor conditions.This paper presents HySKG, an endto-end RSSI-based SKG framework integrating parameter-tuned Moving Window Average preprocessing, Gray Code quantization, Cascade reconciliation, universal hash-based privacy amplification, statistical randomness evaluation, and AES-128 key extraction.The framework is implemented on Raspberry Pi 5 devices using IEEE 802.11n and evaluated across three outdoor propagation scenarios.HySKG achieves Pearson correlations of 0.937-0.993and a final Key Disagreement Rate of 0.00%, while retaining 3,072-3,328 bits of AES-compatible key material, corresponding to 24-26 AES-128 blocks, at an end-to-end Key Generation Rate of 25.99-26.66bps.The complete processing pipeline executes in less than 60 ms.Compared with five evaluated classical SKG baselines, HySKG produces approximately 3.7 times more retained key material under the same experimental conditions.NIST SP 800-22 testing indicates favorable statistical randomness characteristics for the evaluated key sequences, while the Leftover Hash Lemma analysis shows that the retained output lengths exceed the strict information-theoretic secrecy bounds.Therefore, the retained outputs are interpreted as statistically validated, AES-compatible key material rather than informationtheoretically secure secret keys.These results demonstrate the practical efficiency of the proposed integrated SKG framework for lightweight agricultural edge-IoT communication.
Secure wireless communication is an important requirement for portable devices operating in outdoor environments, where transmitted data can be easily intercepted by unauthorized nodes. This paper presents a performance analysis of Secret Key Generation (SKG) on portable devices for peer-to-peer communication. The proposed system generates a shared secret key from Received Signal Strength Indicator (RSSI) measurements without transmitting the key through the network. The SKG process consists of channel probing, Kalman Filter preprocessing, multibit quantization, BCH reconciliation, and privacy amplification using Universal Hash and SHA-1. The generated key is then used for AES-128 encryption for secure data transmission between legitimate devices. The performance evaluation is based on the best Kalman Filter configuration parameter Q<R and Q>R using the block data variations 1, 2, 4 and 10. The experimental results show that the Q<R with 10 block configuration has the highest RSSI correlation between Alice and Bob, which is 0.9129,0.9546, and 0.9238 in three test scenarios. The multibit quantization stage provides a stable Key Generation Rate (KGR) of up to 25.22 bit/s, while the BCH reconciliation successfully reduces the Key Disagreement Rate (KDR) between Alice and Bob to 0% in all cases. Eve, on the other hand, has a high KDR and does not get the same key as the legitimate devices. The results demonstrate that the presented SKG mechanism is capable of generating synchronized, random and secure keys for portable peer-to-peer communication.
This paper proposes a reconciliation-efficient Received Signal Strength Indicator (RSSI)-based Secret Key Generation (SKG) scheme for outdoor wireless communication. The proposed method integrates Variance-Aware Hybrid Preprocessing (VAHP), Gray Code quantization, reliability-aware bit selection, 128-bit key block verification, universal hash-based privacy amplification, and SHA-256-based 128-bit key extraction. Unlike conventional SKG schemes that rely on full multi-pass information reconciliation, the proposed approach accepts only identical 128-bit candidate blocks and rejects mismatched blocks, thereby reducing dependency on full reconciliation. Experimental results across three outdoor scenarios show that VAHP consistently improves RSSI reciprocity, increasing the Pearson correlation from 0.4207 to 0.7989 in Scenario 1, from 0.8243 to 0.9520 in Scenario 2, and from 0.7514 to 0.8680 in Scenario 3. Reliability-aware bit selection reduces the Bit Disagreement Rate (BDR) in all scenarios, while key block verification achieves a final Key Disagreement Rate (KDR) of 0.00% for all accepted key blocks. The final extracted keys achieve a 100% AES-128 encryption/decryption success rate and an overall pass rate of 97.80% across selected NIST-based randomness tests. These results indicate that the proposed scheme can generate identical and usable AES-128 keys while reducing reconciliation overhead, at the cost of rejecting unreliable key blocks and reducing the effective Key Generation Rate (KGR).
Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.
Since the emergence of Internet of Things (IoT) technology on the surface a few years ago, this IoT technology has been advancing. It has attracted the attention of cybercriminals. One of the cybercrime targets is the security of key management systems and their distribution schemes. This paper offers a solution to this issue by using a physical layer key generation (PLKG) scheme which utilizes the received signal strength indicator (RSSI) from a Long Range (LoRa) device as a key extraction source. The proposed scheme utilizes several methods. Polynomial fitting is used for the initial fitting process, 2-Ary quantization for conversion of RSSI to multibit, BCH to correct the difference in bits obtained between the two authorized users, privacy amplification for increased randomness, and AES-128 for encryption of sent messages. The expected outcome of this paper is that the scheme developed can generate keys with high approximate entropy and fulfills randomness requirements so that there is no need to distribute keys between authorized users. Testing the success of the scheme will be carried out in indoor and outdoor environments with static user positions. The test results show that the keys generated in all scenarios meet the randomness requirements with approximate entropy values above 0.01.