Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design of a high numerical aperture vacuum chamber for 3D optical lattice experiments

Bhagwan Singh

Published Apr 21, 2022• 0 citations
OpenAlex

Abstract

The next generation of 3D optical lattice experiments requires a new vacuum chamber design. In the past, a 3D optical lattice apparatus in our lab was used to create and observe antiferromagnetic (AFM) coorelations within a 6Li-based degenerate Fermi gas. In that experiment, implementing anti-trapping beams overlapped with the standard lattice beams allowed the potential landscape to be made smoother, in an effort to increase the spatial extent of the AFM phase. Nevertheless, preparing atoms to be even cooler, and further extending the region of interest requires newer solutions. One method is to use the anti-trapping beams in a slightly different manner. By utilizing a higher numerical aperture optical beam line for anti-trapping, finer adjustments can be made in the potential. Combined with digital-micromirror based holography techniques. the anti-trapping beams can be custom-shaped to carve even finer details into the optical lattice. With sufficient control over beamshaping, one could perform better entropy re-distribution within the atom cloud. In this way, the central AFM region can be made colder by pushing entropy out to the wings. In this thesis, I will detail the work done in analyzing and designing a new chamber to fulfill the previously mentioned features.

Related papers

3D optical lattice system for ultra-cold Lithium 6

Tsung‐Lin Yang

Optical lattice experiments have proved to be a versatile tool for studying strongly correlated quantum systems. The motivation behind these experiments is to use the cold atoms to emulate a solid state system for which the Hamiltonian is analytically or numerically non-solvable. In our experiment, we construct a 3D simple cubic lattice system which realizes the Fermi-Hubbard model and provides us the opportunity to study the antiferromagnetic (AFM) insulator phase. In order to establish evaporative cooling in the optical lattice and to enlarge the size of the AFM phase, we implement a compensation potential additional to the standard lattice beam. In this thesis, I will present detailed steps to construct and calibrate the compensated 3D optical lattice system.

•Apr 25, 2014•0 citations

Creating a two dimensional cold mixture experiment

Michael Holynski

A cold atom experiment can be used to simulate analogous solid-state systems. This provides the bene�t of having a high degree of control over the system parameters and allowing direct detection methods. Disordered transport is one example of where such a system has much to o�er. This thesis concerns the development of a Bose-Fermi mixture experiment for study of two-dimensional optical lattice systems. To achieve single site resolution of the lattice, the experiment makes use of a double microscope set-up. One microscope provides imaging and the second is used to image a spatial light modulator onto the atomic plane. This provides an extremely versatile potential landscape for a trapped cloud. This thesis presents an overview of the set-up of the experiment including progress towards condensation. Particular focus is given to the design and characterisation of the vacuum system and the combined double microscope and spatial light modulator system. The vacuum system design requires a narrow magneto-optical trapping chamber. A novel epoxy sealing technique has been developed, allowing construction of a chamber of just 36mm thickness whilst maintaining high optical access. To provide illumination for the spatial light modulator a technique for homogenising the output of multi-mode �bre has been developed.

•Dec 1, 2012•2 citations

A magneto-optical trap for the preparation of a three-component Fermi gas in an optical lattice

M. G. Ries

This thesis reports on the first steps towards the preparation of an ultracold threecomponent Fermi gas of 6Li in an optical lattice. A vacuum chamber and a magneto-optical trap (MOT) for 6Li were set up and characterized. The MOT will serve as a first trapping and cooling stage, from which atoms can be loaded into an optical dipole trap for further cooling. The crucial parameters of the apparatus are a high MOT loading rate for fast experiment cycles, and a low background pressure, which will provide an undisturbed environment and thus a long lifetime for atoms in the lattice. The loading rate of the MOT was measured to be L ~ 3 x 108 atoms/s at an oven temperature of Toven = 350 C, which exceeds current state of the art experiments and will allow for loading times of less than one second in the planned experiments. The background collision limited lifetime of atoms in the MOT is t ~ 23 min. Collisions with the background gas are therefore not expected to be a limiting factor for the lifetime of atoms in the optical lattice.

•Jan 1, 2010•1 citation

The Quantum Walk Microscope

Stefan Brakhane

In this thesis, I present single-site detection of neutral atoms stored in a three-dimensional optical lattice using a numerical aperture objective lens (NAdesign = 0.92). The combination of high-resolution imaging with state-dependent trapping along two-direction of the lattice opens up the path towards quantum simulations via quantum walks. Suppressing the interactions of a quantum system with the environment is essential for all quantum simulation experiments. It demands a precise control of both the external magnetic (stray) fields and the polarization properties of laser beams inside the vacuum chamber. I designed a metal shielding to reduce magnetic field fluctuations and designed, assembled and characterized a novel ultra-high vacuum glass cell. The glass cell consists of special glass material and exhibits an ultra-low birefringence Δn of a few times 10^-8 to highly suppress polarization disturbances originating from stress birefringence in vacuum windows. Furthermore, anti-reflection coatings avoid reflections on all window surfaces. The cell hosts the assembled vacuum-compatible objective, that exhibits a diffraction limited resolution of up to 453 nm and allows to optically resolve the spacing of the optical lattice. Fluorescence images of single trapped atoms are used to characterize the imaging system. The filling, orientation and geometry of the optical lattice is precisely reconstructed using positions of atoms that can be determined from fluorescence images. Furthermore, I present a scheme to realize state-dependent transport and discuss its robustness against experimental imperfections in a technical implementation. This transport scheme enable the realization of discrete-time quantum walks with neutral atoms in two dimensions. These quantum walks pave the way towards the simulation of artificial magnetic fields and topologically protected edge states.

•Mar 2, 2017•5 citations

Apparatus for the preparation of ultracold Fermi gases

P Ringer Simon

This thesis reports on the first steps towards an experimental setup capable of realizing an ultracold three-component Fermi gas in an optical lattice: the construction of an apparatus that captures and cools 6Li -atoms inside a magneto optical trap (MOT). The focus of this thesis was the implementation of the Zeeman slower, the laser system and hard- and software controlling the experiment. Since these provide the starting point for all future developments it was especially important to ensure that they do not limit future experiments. With a MOT loading rate of L ~ 3 x 108 atoms/second at an oven temperature of 350 °C it is possible to capture enough atoms for further experiments in about one second allowing fast cycle times of the experiment. The achieved background pressure in the vacuum chamber, essential for the next experimental steps, is excellent as indicated by the background gas collision limited MOT lifetime of τ ~ 23 minutes. The next step will be to implement a dipole trap to further cool the 6Li -atoms.

•Jan 1, 2010•0 citations

High-resolution imaging and manipulation of cold atoms through a multimode fiber

Sébastien Garcia, Nicolas Vitrant, Kilian Müller +1 more

A high imaging resolution or a tight focus of a laser beam imposes a certain minimal numerical aperture (NA) of the optical system. Macroscopic high NA lenses constraint strongly the spatial organization of experiments, in particular when imaging or trapping cold atoms inside a vacuum chamber. Multimode fibers, in conjunction with spatial light modulators, offer an interesting alternative to high NA lenses. Indeed, they are flexible optical waveguides with very small transverse dimensions (∼ 100 μm), and reasonably high NA (up to 0.5). For those reasons, the use of multimode fibers for imaging or laser manipulation purposes has been widely studied in the past years. Here, we transfer these techniques to the field of cold atoms with a multimode fiber forming a compact optical bridge between the inside and the outside of an ultra-high vacuum chamber. We manipulate atoms with laser beams produced through the fiber by digital optical phase conjugation with a spatial light modulator. We are able to transport a small cloud of cold rubidium atoms with a moving optical lattice at about 200 μm from the fiber tip. We can then load them in small optical tweezers with a waist of 1.2 μm. By characterizing the propagation of light modes inside the fiber, we numerically invert its transformation and we reconstruct absorption images of the trapped atoms with a resolution of approximately 1 μm. These results pave the way towards the efficient use of multimode fibers in spatially constrained quantum technology platforms relying on cold atoms.

SPIE Quantum Technologies•May 31, 2022•0 citations
The next generation of 3D optical lattice experiments requires a new vacuum chamber design. In the past, a 3D optical lattice apparatus in our lab was used to create and observe antiferromagnetic (AFM) coorelations within a 6Li-based degenerate Fermi gas. In that experiment, implementing anti-trapping beams overlapped with the standard lattice beams allowed the potential landscape to be made smoother, in an effort to increase the spatial extent of the AFM phase. Nevertheless, preparing atoms to be even cooler, and further extending the region of interest requires newer solutions. One method is to use the anti-trapping beams in a slightly different manner. By utilizing a higher numerical aperture optical beam line for anti-trapping, finer adjustments can be made in the potential. Combined with digital-micromirror based holography techniques. the anti-trapping beams can be custom-shaped to carve even finer details into the optical lattice. With sufficient control over beamshaping, one could perform better entropy re-distribution within the atom cloud. In this way, the central AFM region can be made colder by pushing entropy out to the wings. In this thesis, I will detail the work done in analyzing and designing a new chamber to fulfill the previously mentioned features.
Optical lattice experiments have proved to be a versatile tool for studying strongly correlated quantum systems. The motivation behind these experiments is to use the cold atoms to emulate a solid state system for which the Hamiltonian is analytically or numerically non-solvable. In our experiment, we construct a 3D simple cubic lattice system which realizes the Fermi-Hubbard model and provides us the opportunity to study the antiferromagnetic (AFM) insulator phase. In order to establish evaporative cooling in the optical lattice and to enlarge the size of the AFM phase, we implement a compensation potential additional to the standard lattice beam. In this thesis, I will present detailed steps to construct and calibrate the compensated 3D optical lattice system.
A cold atom experiment can be used to simulate analogous solid-state systems. This provides the bene�t of having a high degree of control over the system parameters and allowing direct detection methods. Disordered transport is one example of where such a system has much to o�er. This thesis concerns the development of a Bose-Fermi mixture experiment for study of two-dimensional optical lattice systems. To achieve single site resolution of the lattice, the experiment makes use of a double microscope set-up. One microscope provides imaging and the second is used to image a spatial light modulator onto the atomic plane. This provides an extremely versatile potential landscape for a trapped cloud. This thesis presents an overview of the set-up of the experiment including progress towards condensation. Particular focus is given to the design and characterisation of the vacuum system and the combined double microscope and spatial light modulator system. The vacuum system design requires a narrow magneto-optical trapping chamber. A novel epoxy sealing technique has been developed, allowing construction of a chamber of just 36mm thickness whilst maintaining high optical access. To provide illumination for the spatial light modulator a technique for homogenising the output of multi-mode �bre has been developed.
This thesis reports on the first steps towards the preparation of an ultracold threecomponent Fermi gas of 6Li in an optical lattice. A vacuum chamber and a magneto-optical trap (MOT) for 6Li were set up and characterized. The MOT will serve as a first trapping and cooling stage, from which atoms can be loaded into an optical dipole trap for further cooling. The crucial parameters of the apparatus are a high MOT loading rate for fast experiment cycles, and a low background pressure, which will provide an undisturbed environment and thus a long lifetime for atoms in the lattice. The loading rate of the MOT was measured to be L ~ 3 x 108 atoms/s at an oven temperature of Toven = 350 C, which exceeds current state of the art experiments and will allow for loading times of less than one second in the planned experiments. The background collision limited lifetime of atoms in the MOT is t ~ 23 min. Collisions with the background gas are therefore not expected to be a limiting factor for the lifetime of atoms in the optical lattice.
In this thesis, I present single-site detection of neutral atoms stored in a three-dimensional optical lattice using a numerical aperture objective lens (NAdesign = 0.92). The combination of high-resolution imaging with state-dependent trapping along two-direction of the lattice opens up the path towards quantum simulations via quantum walks. Suppressing the interactions of a quantum system with the environment is essential for all quantum simulation experiments. It demands a precise control of both the external magnetic (stray) fields and the polarization properties of laser beams inside the vacuum chamber. I designed a metal shielding to reduce magnetic field fluctuations and designed, assembled and characterized a novel ultra-high vacuum glass cell. The glass cell consists of special glass material and exhibits an ultra-low birefringence Δn of a few times 10^-8 to highly suppress polarization disturbances originating from stress birefringence in vacuum windows. Furthermore, anti-reflection coatings avoid reflections on all window surfaces. The cell hosts the assembled vacuum-compatible objective, that exhibits a diffraction limited resolution of up to 453 nm and allows to optically resolve the spacing of the optical lattice. Fluorescence images of single trapped atoms are used to characterize the imaging system. The filling, orientation and geometry of the optical lattice is precisely reconstructed using positions of atoms that can be determined from fluorescence images. Furthermore, I present a scheme to realize state-dependent transport and discuss its robustness against experimental imperfections in a technical implementation. This transport scheme enable the realization of discrete-time quantum walks with neutral atoms in two dimensions. These quantum walks pave the way towards the simulation of artificial magnetic fields and topologically protected edge states.
This thesis reports on the first steps towards an experimental setup capable of realizing an ultracold three-component Fermi gas in an optical lattice: the construction of an apparatus that captures and cools 6Li -atoms inside a magneto optical trap (MOT). The focus of this thesis was the implementation of the Zeeman slower, the laser system and hard- and software controlling the experiment. Since these provide the starting point for all future developments it was especially important to ensure that they do not limit future experiments. With a MOT loading rate of L ~ 3 x 108 atoms/second at an oven temperature of 350 °C it is possible to capture enough atoms for further experiments in about one second allowing fast cycle times of the experiment. The achieved background pressure in the vacuum chamber, essential for the next experimental steps, is excellent as indicated by the background gas collision limited MOT lifetime of τ ~ 23 minutes. The next step will be to implement a dipole trap to further cool the 6Li -atoms.
A high imaging resolution or a tight focus of a laser beam imposes a certain minimal numerical aperture (NA) of the optical system. Macroscopic high NA lenses constraint strongly the spatial organization of experiments, in particular when imaging or trapping cold atoms inside a vacuum chamber. Multimode fibers, in conjunction with spatial light modulators, offer an interesting alternative to high NA lenses. Indeed, they are flexible optical waveguides with very small transverse dimensions (∼ 100 μm), and reasonably high NA (up to 0.5). For those reasons, the use of multimode fibers for imaging or laser manipulation purposes has been widely studied in the past years. Here, we transfer these techniques to the field of cold atoms with a multimode fiber forming a compact optical bridge between the inside and the outside of an ultra-high vacuum chamber. We manipulate atoms with laser beams produced through the fiber by digital optical phase conjugation with a spatial light modulator. We are able to transport a small cloud of cold rubidium atoms with a moving optical lattice at about 200 μm from the fiber tip. We can then load them in small optical tweezers with a waist of 1.2 μm. By characterizing the propagation of light modes inside the fiber, we numerically invert its transformation and we reconstruct absorption images of the trapped atoms with a resolution of approximately 1 μm. These results pave the way towards the efficient use of multimode fibers in spatially constrained quantum technology platforms relying on cold atoms.