Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Apparatus for the preparation of ultracold Fermi gases

P Ringer Simon

Published Jan 1, 2010• 0 citations
OpenAlex

Abstract

This thesis reports on the first steps towards an experimental setup capable of realizing an ultracold three-component Fermi gas in an optical lattice: the construction of an apparatus that captures and cools 6Li -atoms inside a magneto optical trap (MOT). The focus of this thesis was the implementation of the Zeeman slower, the laser system and hard- and software controlling the experiment. Since these provide the starting point for all future developments it was especially important to ensure that they do not limit future experiments. With a MOT loading rate of L ~ 3 x 108 atoms/second at an oven temperature of 350 °C it is possible to capture enough atoms for further experiments in about one second allowing fast cycle times of the experiment. The achieved background pressure in the vacuum chamber, essential for the next experimental steps, is excellent as indicated by the background gas collision limited MOT lifetime of τ ~ 23 minutes. The next step will be to implement a dipole trap to further cool the 6Li -atoms.

Related papers

A magneto-optical trap for the preparation of a three-component Fermi gas in an optical lattice

M. G. Ries

This thesis reports on the first steps towards the preparation of an ultracold threecomponent Fermi gas of 6Li in an optical lattice. A vacuum chamber and a magneto-optical trap (MOT) for 6Li were set up and characterized. The MOT will serve as a first trapping and cooling stage, from which atoms can be loaded into an optical dipole trap for further cooling. The crucial parameters of the apparatus are a high MOT loading rate for fast experiment cycles, and a low background pressure, which will provide an undisturbed environment and thus a long lifetime for atoms in the lattice. The loading rate of the MOT was measured to be L ~ 3 x 108 atoms/s at an oven temperature of Toven = 350 C, which exceeds current state of the art experiments and will allow for loading times of less than one second in the planned experiments. The background collision limited lifetime of atoms in the MOT is t ~ 23 min. Collisions with the background gas are therefore not expected to be a limiting factor for the lifetime of atoms in the optical lattice.

•Jan 1, 2010•1 citation

Umbau und Inbetriebnahme eines MOTReMi-Aufbaus für zukünftige Experimente mit ultrakaltem 6Li

C. Bogda

This thesis deals with the reconstruction of a MOTRe- Mi apparatus, which represents the combination of a magneto-optical trap (MOT) and a Reaction Microscope (ReMi). With this setup an ultracold degenerate Fermi gas consisting of 6Li atoms will be generated and studied in future. Primarily the Li atoms will be vaporized, precooled in a Zeeman Slower, trapped and stored with the MOT at typical temperatures of a few 100 μK. Within the scope of this thesis initially the parameters of the Zeeman Slower were optimized. For this purpose the magnetic field profiles of the single coils were measured and the ideal coil currents determined. The efficiency and other properties of the Zeeman Slower were calculated with a simulation programme. The focus of this thesis was on planning and reconstructing the laser system and the optical setup for the magneto-optical trap. This included among others the adaptation of the laser frequencies from 7Li to 6Li and the integration of an additional amplifier in order to achieve a higher output power. Using the frequency stabilization scheme of a frequency offset lock ([SEG+99]) it is now possible to tune the laser frequency over a large range at a constant laser power. This is required on the one hand for the later transfer of the atoms to a dipole trap and on the other hand for the imaging of the atom cloud by light absorption at high magnetic fields. Finally the vacuum chamber and the Reaction microscope was baked out and activated at a vacuum of about 7 · 10-10 mbar.

•Jan 1, 2015•0 citations

Realization of an Optical Microtrap for a Highly Degenerate Fermi Gas

G. Zürn

This thesis reports on the realization of a micrometer-sized optical dipole trap for the preparation of a highly degenerate Fermi gas of 6Li atoms. The degenerate ensemble in the microtrap is the starting point for future experiments with a finite number of fermions. One phenomenon to study will be the formation of a shell structure in an interacting two-component spin-mixture. 6Li is especially well suited for such experiments due to the easy tuneability of the inter-particle interaction by means of Feshbach resonances. In the course of this thesis, we present our apparatus for the creation of ultracold Fermi gases. Thereby, the main subject is the assembly of our microtrap. After analyzing the assembly in an external test setup, we focus on the scheme for the transfer of atoms from our large volume optical dipole trap into the microtrap. Using a non-interacting Fermi gas we were able to determine the characteristics of the microtrap, such as lifetime and trap frequencies. Subsequently, we can give an estimation for the degeneracy of the Fermi gas inside. As an outlook, we present our first promising attempts to control the particle number, which is the next milestone on the way towards experiments on finite systems of fermions.

•Jan 1, 2009•0 citations

A single apparatus for the production of ultracold fermionic lithium and cold bosonic caesium gases

Asaf Paris-Mandoki

Ultracold mixture experiments hold the promise of providing new insights into many-body quantum systems as well as ultracold chemistry and few-body phenomena. The work presented in this thesis dealt with the construction of a new apparatus for the production and study of ultracold gases of fermionic lithium-6 and bosonic caesium-133. These isotopes offer a wide tunability in their interaction strength, both in inter-species and intra-species collisions, through magnetic Feshbach resonances. Additionally, the widely different resonance frequencies of lithium and caesium enables independent control of each of the species. With this apparatus, Bose-Einstein condensates (BEC) containing 10^4 lithium Feshbach molecules are routinely produced. The cooling system for caesium has been developed in parallel and important steps towards producing ultracold caesium gases have been made. An optical dipole trap has been loaded with 2x10^6 caesium atoms and evaporative cooling towards quantum degeneracy can now be pursued. Laser, vacuum, magnetic and control systems have been developed for the implementation of this experiment. Light produced with this laser system was used to laser cool atoms, create conservative dipole traps as well as to provide means of imaging atomic clouds. Additionally, a system to produce strong magnetic fields of up to 1400 G has been established in order to exploit the wide tunability in the atomic interactions. Software that was developed for the computerised control system facilitated the coordination of all the components involved in the experimental sequence. Measurements and calculations that showcase the functionality of relevant parts of the setup are presented in this thesis. In this experiment, lithium and caesium atoms are obtained from a novel type of Zeeman slower and are loaded into a magneto-optical trap (MOT). The system is capable of doing this independently for each of the atomic species as well as sequentially. After the MOT has been loaded with atoms, they are transferred into a conservative far-off-resonance optical dipole trap. By adjusting the interactions between atoms and lowering the depth of the dipole trap, efficient evaporative cooling of lithium was carried out from which a molecular BEC was obtained. Time-of-flight measurements were used to characterise the condensate and study its expansion dynamics.

•Dec 10, 2015•0 citations

A compact system for ultracold atoms

Lara Torralbo-Campo

This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.

•Nov 30, 2012•0 citations

An apparatus for the production of molecular Bose-Einstein condensates

Thomas Lompe

This thesis reports on the construction of an apparatus capable of producing a molecular Bose-Einstein-Condensate (BEC) of 6Li2. To create a condensate fermionic lithium is first evaporated in an oven, slowed by a Zeeman slower and captured in a magneto-optical-trap (MOT). A scheme for creating time-averaged arbitrary optical potentials for optimized transfer of the atoms from the MOT to a high-power, far detuned optical dipole trap was implemented, as well as magnetic field coils to tune the interactions of the atoms via Feshbach resonances. The first experiments with the new machine include the characterization of the optical dipole trap and evaporative cooling of 6Li.

•Jan 1, 2008•1 citation
This thesis reports on the first steps towards an experimental setup capable of realizing an ultracold three-component Fermi gas in an optical lattice: the construction of an apparatus that captures and cools 6Li -atoms inside a magneto optical trap (MOT). The focus of this thesis was the implementation of the Zeeman slower, the laser system and hard- and software controlling the experiment. Since these provide the starting point for all future developments it was especially important to ensure that they do not limit future experiments. With a MOT loading rate of L ~ 3 x 108 atoms/second at an oven temperature of 350 °C it is possible to capture enough atoms for further experiments in about one second allowing fast cycle times of the experiment. The achieved background pressure in the vacuum chamber, essential for the next experimental steps, is excellent as indicated by the background gas collision limited MOT lifetime of τ ~ 23 minutes. The next step will be to implement a dipole trap to further cool the 6Li -atoms.
This thesis reports on the first steps towards the preparation of an ultracold threecomponent Fermi gas of 6Li in an optical lattice. A vacuum chamber and a magneto-optical trap (MOT) for 6Li were set up and characterized. The MOT will serve as a first trapping and cooling stage, from which atoms can be loaded into an optical dipole trap for further cooling. The crucial parameters of the apparatus are a high MOT loading rate for fast experiment cycles, and a low background pressure, which will provide an undisturbed environment and thus a long lifetime for atoms in the lattice. The loading rate of the MOT was measured to be L ~ 3 x 108 atoms/s at an oven temperature of Toven = 350 C, which exceeds current state of the art experiments and will allow for loading times of less than one second in the planned experiments. The background collision limited lifetime of atoms in the MOT is t ~ 23 min. Collisions with the background gas are therefore not expected to be a limiting factor for the lifetime of atoms in the optical lattice.
This thesis deals with the reconstruction of a MOTRe- Mi apparatus, which represents the combination of a magneto-optical trap (MOT) and a Reaction Microscope (ReMi). With this setup an ultracold degenerate Fermi gas consisting of 6Li atoms will be generated and studied in future. Primarily the Li atoms will be vaporized, precooled in a Zeeman Slower, trapped and stored with the MOT at typical temperatures of a few 100 μK. Within the scope of this thesis initially the parameters of the Zeeman Slower were optimized. For this purpose the magnetic field profiles of the single coils were measured and the ideal coil currents determined. The efficiency and other properties of the Zeeman Slower were calculated with a simulation programme. The focus of this thesis was on planning and reconstructing the laser system and the optical setup for the magneto-optical trap. This included among others the adaptation of the laser frequencies from 7Li to 6Li and the integration of an additional amplifier in order to achieve a higher output power. Using the frequency stabilization scheme of a frequency offset lock ([SEG+99]) it is now possible to tune the laser frequency over a large range at a constant laser power. This is required on the one hand for the later transfer of the atoms to a dipole trap and on the other hand for the imaging of the atom cloud by light absorption at high magnetic fields. Finally the vacuum chamber and the Reaction microscope was baked out and activated at a vacuum of about 7 · 10-10 mbar.
This thesis reports on the realization of a micrometer-sized optical dipole trap for the preparation of a highly degenerate Fermi gas of 6Li atoms. The degenerate ensemble in the microtrap is the starting point for future experiments with a finite number of fermions. One phenomenon to study will be the formation of a shell structure in an interacting two-component spin-mixture. 6Li is especially well suited for such experiments due to the easy tuneability of the inter-particle interaction by means of Feshbach resonances. In the course of this thesis, we present our apparatus for the creation of ultracold Fermi gases. Thereby, the main subject is the assembly of our microtrap. After analyzing the assembly in an external test setup, we focus on the scheme for the transfer of atoms from our large volume optical dipole trap into the microtrap. Using a non-interacting Fermi gas we were able to determine the characteristics of the microtrap, such as lifetime and trap frequencies. Subsequently, we can give an estimation for the degeneracy of the Fermi gas inside. As an outlook, we present our first promising attempts to control the particle number, which is the next milestone on the way towards experiments on finite systems of fermions.
Ultracold mixture experiments hold the promise of providing new insights into many-body quantum systems as well as ultracold chemistry and few-body phenomena. The work presented in this thesis dealt with the construction of a new apparatus for the production and study of ultracold gases of fermionic lithium-6 and bosonic caesium-133. These isotopes offer a wide tunability in their interaction strength, both in inter-species and intra-species collisions, through magnetic Feshbach resonances. Additionally, the widely different resonance frequencies of lithium and caesium enables independent control of each of the species. With this apparatus, Bose-Einstein condensates (BEC) containing 10^4 lithium Feshbach molecules are routinely produced. The cooling system for caesium has been developed in parallel and important steps towards producing ultracold caesium gases have been made. An optical dipole trap has been loaded with 2x10^6 caesium atoms and evaporative cooling towards quantum degeneracy can now be pursued. Laser, vacuum, magnetic and control systems have been developed for the implementation of this experiment. Light produced with this laser system was used to laser cool atoms, create conservative dipole traps as well as to provide means of imaging atomic clouds. Additionally, a system to produce strong magnetic fields of up to 1400 G has been established in order to exploit the wide tunability in the atomic interactions. Software that was developed for the computerised control system facilitated the coordination of all the components involved in the experimental sequence. Measurements and calculations that showcase the functionality of relevant parts of the setup are presented in this thesis. In this experiment, lithium and caesium atoms are obtained from a novel type of Zeeman slower and are loaded into a magneto-optical trap (MOT). The system is capable of doing this independently for each of the atomic species as well as sequentially. After the MOT has been loaded with atoms, they are transferred into a conservative far-off-resonance optical dipole trap. By adjusting the interactions between atoms and lowering the depth of the dipole trap, efficient evaporative cooling of lithium was carried out from which a molecular BEC was obtained. Time-of-flight measurements were used to characterise the condensate and study its expansion dynamics.
This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.
This thesis reports on the construction of an apparatus capable of producing a molecular Bose-Einstein-Condensate (BEC) of 6Li2. To create a condensate fermionic lithium is first evaporated in an oven, slowed by a Zeeman slower and captured in a magneto-optical-trap (MOT). A scheme for creating time-averaged arbitrary optical potentials for optimized transfer of the atoms from the MOT to a high-power, far detuned optical dipole trap was implemented, as well as magnetic field coils to tune the interactions of the atoms via Feshbach resonances. The first experiments with the new machine include the characterization of the optical dipole trap and evaporative cooling of 6Li.