Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Time-resolved noise characterisation tool to track fluctuating noise effects in superconducting qubits

Abhishek Agarwal, Lachlan Lindoy, Deep Lall, Yannic Rath, Ivan Rungger

Published Jan 1, 2025• 0 citations
Publisher

Abstract

Superconducting qubits have seen rapid increases in their coherence in the last few decades. However, instability in qubit parameters and their noise environment remains as a major challenge that limits the device performance. Qubit metrology to collectively measure and characterise different sources of noise and fluctuations is essential for accurately benchmarking devices but can be challenging, and typically different noise sources are characterised independently. In order to characterise the combined noise, we develop a tool that uses few-measurement data to detect and diagnose noise fluctuations, as well as a time series segmentation tool to further disambiguate different sources of fluctuations. We demonstrate the tool by computing time resolved properties of individual superconducting qubits. We find large changes of the dominating noise contributions, such as qubit frequency fluctuations, over both long time-scales of hours and days, and also over very short milli-seconds time-scales. We show that this information can be used alongside accurate noise models to learn physical properties of the coupled noise sources as well as benchmark device stability.

DOI
10.59161/sslw0284

Related papers

Fast-tracking and disentangling of qubit noise fluctuations using minimal-data averaging and hierarchical discrete fluctuation auto-segmentation

Abhishek Agarwal, Lachlan P. Lindoy, Deep Lall +3 more

Qubit noise and fluctuations of the noise over time are key factors limiting the performance of quantum computers. Characterising them with high temporal resolution is challenging due to multiple overlapping stochastic processes such as discrete jumps and continuous drifts. Hence, experiments typically probe individual sources of fluctuations rather than concurrent fluctuations caused by multiple sources. To overcome this limitation we develop a framework comprising a noise characterisation method with minimal measurements allowing high temporal resolution, combined with a hierarchical discrete fluctuation auto-segmentation tool to disentangle the overlapping fluctuations without human intervention, enabling their characterisation and tracking over long times. We show that on transmon qubits the method can track and disentangle qubit frequency fluctuations with temporal resolution of a few tens of milliseconds over hours. This enables us to identify the origins of the fluctuations as overlapping charge parity and two-level-systems switching. Beyond insights into the fluctuation origins, our method also provides information that can be used to improve qubit calibration, error mitigation and error correction.

arXiv:2505.23622•May 29, 2025•6 citations

Development and experimental implementation of noise characterisation techniques on a superconducting quantum processor

Nelson M. M. Fernández, Francesco Grieco, Hetta Vappula +6 more

Noise characterisation not only enables error mitigation but also provides valuable information about the intrinsic performance of a quantum device, identifying dominant error contributions and bounding noise stability well beyond the aggregated calibration data. Deploying such methods on a specific hardware topology must combine efficiency and accuracy, assess noise stability, and validate the reconstructed noise model. Here we develop and implement these methods on a superconducting processor with square-lattice topology. First, we revise the cycle-benchmarking protocol and reduce the bias arising from unlearnable degrees of freedom via a regularised cost function. Second, we extend a previously developed tensor-network tomography method to match the device layout and show how its accuracy can be improved by repeated layer execution. Both methods allow approximate sublayer noise models to be extracted from parent ones. Using noise characterisation as a tool, we map the noise structure, track drift, and validate the adequacy of the learnt noise models against experimentally observed noisy estimations in benchmark physical and chemistry circuits. These results inform further improvements in the underlying technology and provide estimates of the size of noise-mitigated circuits that the device can support.

quant-pharXiv:2610.18000•Oct 14, 2026•0 citations

Non-Markovian noise model for superconducting qubits

Tuomisto, Lauri

Quantum computers are capable of carrying out calculations that are challenging or even impossible for classical computers. Quantum computers consist of quantum bits (qubits) which can exhibit a phenomenon called superposition where the qubit is in multiple states at the same time. Qubits can also be entangled with other qubits, which means that the states of the qubits are dependant on each other in a way that the state of a single qubit can not be expressed independently of the other qubits. These properties of qubits that enable quantum computing, are very sensitive to perturbations a ecting the system of qubits from the outside. A common choice for the physical architecture of a qubit is a superconducting qubit, which has its quantum properties implemented with a superconducting circuit. Realising a su ciently large qubit system has remained a challenge, since increasing the size of the system leads to more unwanted noise that interacts with the qubits. We have only just achieved systems that can outperform classical computers in speci c tasks. These devices do not o er signi cant advantages and the goal remains to grow the qubit systems, and overcoming the challenges caused by noise is of high importance. The e ect of noise can be reduced by designing hardware that has minimal sources of noise, or by creating qubits with error correction, meaning a way of undoing the e ect of noise on a qubit. Both of these approaches demand a way of recognising the noise mechanisms and their signi cance. Noise characterisation can be done with combining a theoretical model for the dynamics of a qubit with measurement data obtained from the qubit system in question. A su cient t of a theoretical model to noisy measurement data provides parametrisation of the noise, and a well designed model can link the noise to real physical phenomena. In this work, we introduce a noise model based on the Non-Markovian Quantum State Di usion equation. We present the physical processes the model describes and showcase its performance with noisy measurement data obtained with a real quantum processor consisting of superconducting qubits.

•Dec 4, 2025•0 citations

Modelling non-Markovian noise in driven superconducting qubits

Abhishek Agarwal, Lachlan P. Lindoy, Deep Lall +2 more

Abstract Non-Markovian noise can be a significant source of errors in superconducting qubits. We develop gate sequences utilising mirrored pseudoidentities that allow us to characterise and model the effects of non-Markovian noise on both idle and driven qubits. We compare three approaches to modelling the observed noise: (i) a Markovian noise model, (ii) a model including interactions with a two-level system (TLS), (iii) a model utilising the post Markovian master equation, which we show to be equivalent to the qubit-TLS model in certain regimes. When running our noise characterisation circuits on a superconducting qubit device we find that purely Markovian noise models cannot reproduce the experimental data. Our model based on a qubit-TLS interaction, on the other hand, is able to closely capture the observed experimental behaviour for both idle and driven qubits. We investigate the stability of the noise properties of the hardware over time, and find that the parameter governing the qubit-TLS interaction strength fluctuates significantly even over short time-scales of a few minutes. Finally, we evaluate the changes in the noise parameters when increasing the qubit drive pulse amplitude. We find that although the hardware noise parameters fluctuate significantly over different days, their drive pulse induced relative variation is rather well defined within computed uncertainties: both the phase error and the qubit-TLS interaction strength change significantly with the pulse strength, with the phase error changing quadratically with the amplitude of the applied pulse. Since our noise model can closely describe the behaviour of idle and driven qubits, it is ideally suited to be used in the development of quantum error mitigation and correction methods.

arXiv:2306.13021•Quantum Science and Technology•Apr 11, 2024•31 citations

Real-Time Correlation of Relaxation, Dephasing, and Two-level System Dynamics in Transmon Qubits

Ambrose Yang, Alexander M. Young, Paal H. Prestegaard +13 more

Materials improvements in transmon qubits have yielded remarkable advances in qubit lifetimes (T1)and coherence times (T2). However, state-of-the-art superconducting qubits experience temporal fluctuations in their performance, which limit gate fidelities and quantum processor performance. We observe correlated increases in qubit relaxation and dephasing rates that last for minutes to hours, which we call T1 and T2 excursions. Using interleaved lifetime and coherence time measurements, noise spectroscopy, and two-level-system (TLS) spectroscopy, we find that these excursions are caused by single or few strongly-coupled TLS defects that spectrally diffuse into resonance with the qubit frequency. Our measurement protocol provides a powerful tool for understanding the noise sources that cause temporal fluctuations in superconducting qubit performance.

quant-pharXiv:2610.34485•Oct 27, 2026•0 citations

Decoherence benchmarking of superconducting qubits

Jonathan Burnett, Andreas Bengtsson, Marco Scigliuzzo +4 more

Abstract We benchmark the decoherence of superconducting transmon qubits to examine the temporal stability of energy relaxation, dephasing, and qubit transition frequency. By collecting statistics during measurements spanning multiple days, we find the mean parameters $$\overline {T_1}$$ T 1 ¯ = 49 μs and $$\overline {T_2^ \ast }$$ T 2 * ¯ = 95 μs; however, both of these quantities fluctuate, explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine sub-millihertz switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit’s frequency stability produces a 0.8 ms limit on the pure dephasing which we also observe. These findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.

arXiv:1901.04417•npj Quantum Information•Jun 26, 2019•397 citations
Superconducting qubits have seen rapid increases in their coherence in the last few decades. However, instability in qubit parameters and their noise environment remains as a major challenge that limits the device performance. Qubit metrology to collectively measure and characterise different sources of noise and fluctuations is essential for accurately benchmarking devices but can be challenging, and typically different noise sources are characterised independently. In order to characterise the combined noise, we develop a tool that uses few-measurement data to detect and diagnose noise fluctuations, as well as a time series segmentation tool to further disambiguate different sources of fluctuations. We demonstrate the tool by computing time resolved properties of individual superconducting qubits. We find large changes of the dominating noise contributions, such as qubit frequency fluctuations, over both long time-scales of hours and days, and also over very short milli-seconds time-scales. We show that this information can be used alongside accurate noise models to learn physical properties of the coupled noise sources as well as benchmark device stability.
Qubit noise and fluctuations of the noise over time are key factors limiting the performance of quantum computers. Characterising them with high temporal resolution is challenging due to multiple overlapping stochastic processes such as discrete jumps and continuous drifts. Hence, experiments typically probe individual sources of fluctuations rather than concurrent fluctuations caused by multiple sources. To overcome this limitation we develop a framework comprising a noise characterisation method with minimal measurements allowing high temporal resolution, combined with a hierarchical discrete fluctuation auto-segmentation tool to disentangle the overlapping fluctuations without human intervention, enabling their characterisation and tracking over long times. We show that on transmon qubits the method can track and disentangle qubit frequency fluctuations with temporal resolution of a few tens of milliseconds over hours. This enables us to identify the origins of the fluctuations as overlapping charge parity and two-level-systems switching. Beyond insights into the fluctuation origins, our method also provides information that can be used to improve qubit calibration, error mitigation and error correction.
Noise characterisation not only enables error mitigation but also provides valuable information about the intrinsic performance of a quantum device, identifying dominant error contributions and bounding noise stability well beyond the aggregated calibration data. Deploying such methods on a specific hardware topology must combine efficiency and accuracy, assess noise stability, and validate the reconstructed noise model. Here we develop and implement these methods on a superconducting processor with square-lattice topology. First, we revise the cycle-benchmarking protocol and reduce the bias arising from unlearnable degrees of freedom via a regularised cost function. Second, we extend a previously developed tensor-network tomography method to match the device layout and show how its accuracy can be improved by repeated layer execution. Both methods allow approximate sublayer noise models to be extracted from parent ones. Using noise characterisation as a tool, we map the noise structure, track drift, and validate the adequacy of the learnt noise models against experimentally observed noisy estimations in benchmark physical and chemistry circuits. These results inform further improvements in the underlying technology and provide estimates of the size of noise-mitigated circuits that the device can support.
Quantum computers are capable of carrying out calculations that are challenging or even impossible for classical computers. Quantum computers consist of quantum bits (qubits) which can exhibit a phenomenon called superposition where the qubit is in multiple states at the same time. Qubits can also be entangled with other qubits, which means that the states of the qubits are dependant on each other in a way that the state of a single qubit can not be expressed independently of the other qubits. These properties of qubits that enable quantum computing, are very sensitive to perturbations a ecting the system of qubits from the outside. A common choice for the physical architecture of a qubit is a superconducting qubit, which has its quantum properties implemented with a superconducting circuit. Realising a su ciently large qubit system has remained a challenge, since increasing the size of the system leads to more unwanted noise that interacts with the qubits. We have only just achieved systems that can outperform classical computers in speci c tasks. These devices do not o er signi cant advantages and the goal remains to grow the qubit systems, and overcoming the challenges caused by noise is of high importance. The e ect of noise can be reduced by designing hardware that has minimal sources of noise, or by creating qubits with error correction, meaning a way of undoing the e ect of noise on a qubit. Both of these approaches demand a way of recognising the noise mechanisms and their signi cance. Noise characterisation can be done with combining a theoretical model for the dynamics of a qubit with measurement data obtained from the qubit system in question. A su cient t of a theoretical model to noisy measurement data provides parametrisation of the noise, and a well designed model can link the noise to real physical phenomena. In this work, we introduce a noise model based on the Non-Markovian Quantum State Di usion equation. We present the physical processes the model describes and showcase its performance with noisy measurement data obtained with a real quantum processor consisting of superconducting qubits.
Abstract Non-Markovian noise can be a significant source of errors in superconducting qubits. We develop gate sequences utilising mirrored pseudoidentities that allow us to characterise and model the effects of non-Markovian noise on both idle and driven qubits. We compare three approaches to modelling the observed noise: (i) a Markovian noise model, (ii) a model including interactions with a two-level system (TLS), (iii) a model utilising the post Markovian master equation, which we show to be equivalent to the qubit-TLS model in certain regimes. When running our noise characterisation circuits on a superconducting qubit device we find that purely Markovian noise models cannot reproduce the experimental data. Our model based on a qubit-TLS interaction, on the other hand, is able to closely capture the observed experimental behaviour for both idle and driven qubits. We investigate the stability of the noise properties of the hardware over time, and find that the parameter governing the qubit-TLS interaction strength fluctuates significantly even over short time-scales of a few minutes. Finally, we evaluate the changes in the noise parameters when increasing the qubit drive pulse amplitude. We find that although the hardware noise parameters fluctuate significantly over different days, their drive pulse induced relative variation is rather well defined within computed uncertainties: both the phase error and the qubit-TLS interaction strength change significantly with the pulse strength, with the phase error changing quadratically with the amplitude of the applied pulse. Since our noise model can closely describe the behaviour of idle and driven qubits, it is ideally suited to be used in the development of quantum error mitigation and correction methods.
Materials improvements in transmon qubits have yielded remarkable advances in qubit lifetimes (T1)and coherence times (T2). However, state-of-the-art superconducting qubits experience temporal fluctuations in their performance, which limit gate fidelities and quantum processor performance. We observe correlated increases in qubit relaxation and dephasing rates that last for minutes to hours, which we call T1 and T2 excursions. Using interleaved lifetime and coherence time measurements, noise spectroscopy, and two-level-system (TLS) spectroscopy, we find that these excursions are caused by single or few strongly-coupled TLS defects that spectrally diffuse into resonance with the qubit frequency. Our measurement protocol provides a powerful tool for understanding the noise sources that cause temporal fluctuations in superconducting qubit performance.
Abstract We benchmark the decoherence of superconducting transmon qubits to examine the temporal stability of energy relaxation, dephasing, and qubit transition frequency. By collecting statistics during measurements spanning multiple days, we find the mean parameters T1‾\overline {T_1}T1​​ T 1 ¯ = 49 μs and T2∗‾\overline {T_2^ \ast }T2∗​​ T 2 * ¯ = 95 μs; however, both of these quantities fluctuate, explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine sub-millihertz switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit’s frequency stability produces a 0.8 ms limit on the pure dephasing which we also observe. These findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.