Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.18000

Development and experimental implementation of noise characterisation techniques on a superconducting quantum processor

Nelson M. M. Fernández, Francesco Grieco, Hetta Vappula, Stefano Mangini, Boris Sokolov, Elsi-Mari Borrelli, Matteo A. C. Rossi, Sergey N. Filippov, N. Walter Talarico

quant-phSubmitted Oct 13, 2026• Announced Oct 14, 2026• 0 citations
arXivHTMLPDF

Abstract

Noise characterisation not only enables error mitigation but also provides valuable information about the intrinsic performance of a quantum device, identifying dominant error contributions and bounding noise stability well beyond the aggregated calibration data. Deploying such methods on a specific hardware topology must combine efficiency and accuracy, assess noise stability, and validate the reconstructed noise model. Here we develop and implement these methods on a superconducting processor with square-lattice topology. First, we revise the cycle-benchmarking protocol and reduce the bias arising from unlearnable degrees of freedom via a regularised cost function. Second, we extend a previously developed tensor-network tomography method to match the device layout and show how its accuracy can be improved by repeated layer execution. Both methods allow approximate sublayer noise models to be extracted from parent ones. Using noise characterisation as a tool, we map the noise structure, track drift, and validate the adequacy of the learnt noise models against experimentally observed noisy estimations in benchmark physical and chemistry circuits. These results inform further improvements in the underlying technology and provide estimates of the size of noise-mitigated circuits that the device can support.

AI Summary

The paper examines how efficiently learned layer-noise models predict circuit outcomes on a square-lattice superconducting processor, using experiments on four- to ten-qubit subsets of a 53-qubit device. It combines noise reconstruction, sublayer extraction, drift measurements, and validation against Loschmidt-echo and quantum-chemistry circuits. Two characterisation methods are developed. For cycle benchmarking, a nonnegative ridge fit replaces symmetry-based assumptions about individually unlearnable Pauli fidelities. Simulations show reduced coefficient bias for the tested rate distribution; regularisation selects a gauge-compatible model rather than resolving unlearnability. Tensor-network channel tomography is extended from chains to square-lattice locally purified networks, with detector tomography correcting measurement errors. Joint fitting across repeated layer applications improves simulated reconstruction: at $5\times10^4$ shots, normalised squared Frobenius error decreases from $7.7\times10^{-3}$ to $4.4\times10^{-4}$. Hardware validation gives mixed accuracy. Tensor-network predictions underestimate echo return probabilities by approximately $14$–$16\%$ on a ten-qubit chain and $26\%$ on a $2\times5$ lattice. For a ten-qubit chemistry circuit with 36 CZ gates, predicted and measured energies differ by $0.0155$ Ha, or $0.87$ measurement standard errors. Sublayer models are approximately extracted from parent layers. Four characterisations of a favourable four-qubit subset indicate $1.59\%$ relative noise variation over roughly four hours. Limitations include uncorrected preparation errors, approximate trace preservation, restricted model expressivity, contraction costs exponential in lattice width, and inconsistent hardware benefits from repeated-layer fitting. A projected mitigation accuracy below $13\%$ for approximately 400 CZ gates and $10^8$ shots assumes favourable small-register noise and stability scale to 50 qubits; it is not experimentally demonstrated.

Little sign of AI-generated textIncrementalStrong assumptionsOverclaims

Error found: Repeated-layer tomography improves the controlled simulation and the untwirled hardware example, but worsens the reported zero-angle prediction error on the twirled hardware acquisition. The demonstrated reduction of bias in unlearnable rates depends on a narrowly distributed simulation ensemble and ground-truth tuning, and does not establish general coefficient accuracy. Tensor-network echo predictions retain systematic discrepancies of approximately 14–26% on the principal chain and lattice examples, despite successful agreement for the chemistry energy. The stated TEM scaling gives a random-error contribution of approximately 62.8 at depth 30, contradicting the claim of below 10% error across depths 15–30. Quadratic regularisation is not generally equivalent to Shannon-entropy maximisation under the measured-product constraints, so the claimed maximum-entropy interpretation is incorrect.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Related papers

Data-efficient quantum noise modeling via machine learning

Yanjun Ji, Marco Roth, David A. Kreplin +2 more

Maximizing the computational utility of near-term quantum processors requires predictive noise models that inform robust, noise-aware compilation and error mitigation. Conventional models often fail to capture the complex error dynamics of real hardware or require prohibitive characterization overhead. We introduce a data-efficient framework that first constructs a physically motivated, parameterized noise model, and subsequently employs machine-learning-driven Bayesian optimization to identify its parameters. Our approach circumvents costly characterization protocols by estimating algorithm- and hardware-specific error parameters directly from readily available experimental data derived from existing application and benchmark circuit executions. The generality and robustness of the framework are demonstrated across diverse algorithms and superconducting devices, yielding high-fidelity predictions by estimating an independent parameter set tailored to each specific algorithm-hardware context. Crucially, we show that a model calibrated exclusively on small-scale circuits accurately predicts the behavior of larger validation circuits. Our data-efficient approach achieves up to a 65% improvement in model fidelity quantified by the Hellinger distance between predicted and experimental circuit output distributions, compared to standard noise models derived from device properties. This work establishes a practical paradigm for application-aware noise characterization, enabling compilation and error-mitigation strategies tailored to the specific interplay between quantum algorithms and device-specific noise dynamics.

arXiv:2509.12933•Physical Review Applied•Feb 11, 2026•5 citations

Tensor network noise characterization for near-term quantum computers

Stefano Mangini, Marco Cattaneo, Daniel Cavalcanti +3 more

Characterization of noise in current near-term quantum devices is of paramount importance to fully use their computational power. However, direct quantum process tomography becomes unfeasible for systems composed of tens of qubits. A promising alternative method based on tensor networks was recently proposed []. In this paper, we adapt it for the characterization of noise channels on near-term quantum computers and investigate its performance thoroughly. In particular, we show how experimentally feasible tomographic samples are sufficient to accurately characterize realistic correlated noise models affecting individual layers of quantum circuits, and study its performance on systems composed of up to 20 qubits. Furthermore, we combine this noise characterization method with a recently proposed noise-aware tensor network error mitigation protocol for correcting outcomes in noisy circuits, resulting accurate estimations even on deep circuit instances. This positions the tensor-network-based noise characterization protocol as a valuable tool for practical error characterization and mitigation in the near-term quantum computing era. Published by the American Physical Society 2024

arXiv:2402.08556•Physical Review Research•Aug 26, 2024•20 citations

Error mitigation with stabilized noise in superconducting quantum processors

Young‐Seok Kim, Luke C. G. Govia, Andrew E. Dane +10 more

Pre-fault tolerant quantum computers have already demonstrated the ability to estimate observable values accurately, at a scale beyond brute-force classical computation. This has been enabled by error mitigation techniques that often rely on a representative model of the device noise. However, learning and maintaining these models is complicated by fluctuations in the noise over unpredictable time scales, for instance, arising from resonant interactions between superconducting qubits and defect two-level systems (TLS). Such interactions affect the stability and uniformity of device performance as a whole, but also affect the noise model accuracy, leading to incorrect observable estimation. Here, we experimentally demonstrate that tuning of the qubit-TLS interactions helps reduce noise instabilities and consequently enables more reliable error-mitigation performance. These experiments provide a controlled platform for studying the performance of error mitigation in the presence of quasi-static noise. We anticipate that the capabilities introduced here will be crucial for the exploration of quantum applications on solid-state processors at non-trivial scales. Interactions between qubits and defect-related two-level systems in superconducting qubit devices are a major source of noise fluctuations that hinder error-mitigation performance. Here, the authors experimentally show that modulating this interaction can reduce noise fluctuation and improve error mitigation performance.

arXiv:2407.02467•Nature Communications•Sep 26, 2025•32 citations

Efficiently improving the performance of noisy quantum computers

Samuele Ferracin, Akel Hashim, Jean-Loup Ville +7 more

Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named ``Noiseless Output Extrapolation" and ``Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86% improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.

arXiv:2201.10672•Quantum•Jul 15, 2024•72 citations

Tensor network characterization and mitigation of readout errors

Yuchen Guo, Shuo Yang

Readout errors are a major bottleneck to extracting reliable information from near-term quantum processors, especially when spatial correlations are non-negligible. We present a unified tensor-network framework that models the readout process as a matrix product operator (MPO), enabling efficient characterization and mitigation beyond uncorrelated approximations. The MPO model is trained via likelihood optimization on calibration data and applies to multiple tasks, including nonlocal observable estimation, random circuit sampling, and random-measurement protocols, such as classical shadows and learning-based tomography. Experiments on a superconducting processor and numerical simulations up to 20 qubits show that the MPO model captures correlated readout errors that uncorrelated models miss, with a sample cost that grows only near-linearly with system size. When extended to two-dimensional systems, the framework can also be integrated with tensor-network quantum error-correction decoders by performing joint inference over data and readout errors. These results establish tensor-network readout error mitigation as a scalable and versatile approach for noise-aware quantum data processing.

quant-pharXiv:2606.25974•Jun 25, 2026•2 citations

Characterization of Unlearnable Noise with Mid-Circuit-Measurement-Based Cycle Benchmarking

M. H. Cheng, Stefano Mangini, V. Bartsch +4 more

Noise characterization of multi-qubit entangling Clifford operations is a key practical bottleneck for quantum error mitigation and for the calibration, validation, and optimization of quantum error-correction protocols, especially in the presence of state preparation and measurement (SPAM) errors. Although cycle benchmarking can isolate some Pauli error components, it cannot resolve the problem of coupled error parameters, which leads to unlearnable degrees of freedom even in simple noisy gates, not to mention general $n$-qubit Clifford gates. Here we introduce mid-circuit-measurement-based generalized cycle benchmarking, a framework that makes otherwise unidentifiable Pauli fidelities and non-Markovian noise learnable via repeated measurements and classical post-processing. Applying the deferred feed-forward principle to generalized cycle benchmarking, we show that an insertion of mid-circuit measurements can reverse Pauli cycles induced by a general Clifford gate. This fact enables us to reveal a Pauli-noise learnability condition for Clifford gates. Assuming sufficient state preparation quality, we numerically demonstrate the feasibility of characterizing the previously unlearnable noise components. We implement the protocol on superconducting quantum processing units and validate its effectiveness in disambiguating the coupled noise components, benchmarked against conventional tomography. Finally, we observe consistent measurement-induced bit-flip bias and non-Markovian correlations, which define a range of applicability for the Pauli noise model and the proposed noise-characterization protocol.

quant-pharXiv:2606.29638•Jun 30, 2026•1 citation
Noise characterisation not only enables error mitigation but also provides valuable information about the intrinsic performance of a quantum device, identifying dominant error contributions and bounding noise stability well beyond the aggregated calibration data. Deploying such methods on a specific hardware topology must combine efficiency and accuracy, assess noise stability, and validate the reconstructed noise model. Here we develop and implement these methods on a superconducting processor with square-lattice topology. First, we revise the cycle-benchmarking protocol and reduce the bias arising from unlearnable degrees of freedom via a regularised cost function. Second, we extend a previously developed tensor-network tomography method to match the device layout and show how its accuracy can be improved by repeated layer execution. Both methods allow approximate sublayer noise models to be extracted from parent ones. Using noise characterisation as a tool, we map the noise structure, track drift, and validate the adequacy of the learnt noise models against experimentally observed noisy estimations in benchmark physical and chemistry circuits. These results inform further improvements in the underlying technology and provide estimates of the size of noise-mitigated circuits that the device can support.
The paper examines how efficiently learned layer-noise models predict circuit outcomes on a square-lattice superconducting processor, using experiments on four- to ten-qubit subsets of a 53-qubit device. It combines noise reconstruction, sublayer extraction, drift measurements, and validation against Loschmidt-echo and quantum-chemistry circuits.
Two characterisation methods are developed. For cycle benchmarking, a nonnegative ridge fit replaces symmetry-based assumptions about individually unlearnable Pauli fidelities. Simulations show reduced coefficient bias for the tested rate distribution; regularisation selects a gauge-compatible model rather than resolving unlearnability. Tensor-network channel tomography is extended from chains to square-lattice locally purified networks, with detector tomography correcting measurement errors. Joint fitting across repeated layer applications improves simulated reconstruction: at 5×1045\times10^45×104 shots, normalised squared Frobenius error decreases from 7.7×10−37.7\times10^{-3}7.7×10−3 to 4.4×10−44.4\times10^{-4}4.4×10−4.
Hardware validation gives mixed accuracy. Tensor-network predictions underestimate echo return probabilities by approximately 141414–16%16\%16% on a ten-qubit chain and 26%26\%26% on a 2×52\times52×5 lattice. For a ten-qubit chemistry circuit with 36 CZ gates, predicted and measured energies differ by 0.01550.01550.0155 Ha, or 0.870.870.87 measurement standard errors. Sublayer models are approximately extracted from parent layers. Four characterisations of a favourable four-qubit subset indicate 1.59%1.59\%1.59% relative noise variation over roughly four hours.
Limitations include uncorrected preparation errors, approximate trace preservation, restricted model expressivity, contraction costs exponential in lattice width, and inconsistent hardware benefits from repeated-layer fitting. A projected mitigation accuracy below 13%13\%13% for approximately 400 CZ gates and 10810^8108 shots assumes favourable small-register noise and stability scale to 50 qubits; it is not experimentally demonstrated.
Maximizing the computational utility of near-term quantum processors requires predictive noise models that inform robust, noise-aware compilation and error mitigation. Conventional models often fail to capture the complex error dynamics of real hardware or require prohibitive characterization overhead. We introduce a data-efficient framework that first constructs a physically motivated, parameterized noise model, and subsequently employs machine-learning-driven Bayesian optimization to identify its parameters. Our approach circumvents costly characterization protocols by estimating algorithm- and hardware-specific error parameters directly from readily available experimental data derived from existing application and benchmark circuit executions. The generality and robustness of the framework are demonstrated across diverse algorithms and superconducting devices, yielding high-fidelity predictions by estimating an independent parameter set tailored to each specific algorithm-hardware context. Crucially, we show that a model calibrated exclusively on small-scale circuits accurately predicts the behavior of larger validation circuits. Our data-efficient approach achieves up to a 65% improvement in model fidelity quantified by the Hellinger distance between predicted and experimental circuit output distributions, compared to standard noise models derived from device properties. This work establishes a practical paradigm for application-aware noise characterization, enabling compilation and error-mitigation strategies tailored to the specific interplay between quantum algorithms and device-specific noise dynamics.
Characterization of noise in current near-term quantum devices is of paramount importance to fully use their computational power. However, direct quantum process tomography becomes unfeasible for systems composed of tens of qubits. A promising alternative method based on tensor networks was recently proposed []. In this paper, we adapt it for the characterization of noise channels on near-term quantum computers and investigate its performance thoroughly. In particular, we show how experimentally feasible tomographic samples are sufficient to accurately characterize realistic correlated noise models affecting individual layers of quantum circuits, and study its performance on systems composed of up to 20 qubits. Furthermore, we combine this noise characterization method with a recently proposed noise-aware tensor network error mitigation protocol for correcting outcomes in noisy circuits, resulting accurate estimations even on deep circuit instances. This positions the tensor-network-based noise characterization protocol as a valuable tool for practical error characterization and mitigation in the near-term quantum computing era. Published by the American Physical Society 2024
Pre-fault tolerant quantum computers have already demonstrated the ability to estimate observable values accurately, at a scale beyond brute-force classical computation. This has been enabled by error mitigation techniques that often rely on a representative model of the device noise. However, learning and maintaining these models is complicated by fluctuations in the noise over unpredictable time scales, for instance, arising from resonant interactions between superconducting qubits and defect two-level systems (TLS). Such interactions affect the stability and uniformity of device performance as a whole, but also affect the noise model accuracy, leading to incorrect observable estimation. Here, we experimentally demonstrate that tuning of the qubit-TLS interactions helps reduce noise instabilities and consequently enables more reliable error-mitigation performance. These experiments provide a controlled platform for studying the performance of error mitigation in the presence of quasi-static noise. We anticipate that the capabilities introduced here will be crucial for the exploration of quantum applications on solid-state processors at non-trivial scales. Interactions between qubits and defect-related two-level systems in superconducting qubit devices are a major source of noise fluctuations that hinder error-mitigation performance. Here, the authors experimentally show that modulating this interaction can reduce noise fluctuation and improve error mitigation performance.
Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named ``Noiseless Output Extrapolation" and ``Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86% improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.
Readout errors are a major bottleneck to extracting reliable information from near-term quantum processors, especially when spatial correlations are non-negligible. We present a unified tensor-network framework that models the readout process as a matrix product operator (MPO), enabling efficient characterization and mitigation beyond uncorrelated approximations. The MPO model is trained via likelihood optimization on calibration data and applies to multiple tasks, including nonlocal observable estimation, random circuit sampling, and random-measurement protocols, such as classical shadows and learning-based tomography. Experiments on a superconducting processor and numerical simulations up to 20 qubits show that the MPO model captures correlated readout errors that uncorrelated models miss, with a sample cost that grows only near-linearly with system size. When extended to two-dimensional systems, the framework can also be integrated with tensor-network quantum error-correction decoders by performing joint inference over data and readout errors. These results establish tensor-network readout error mitigation as a scalable and versatile approach for noise-aware quantum data processing.
Noise characterization of multi-qubit entangling Clifford operations is a key practical bottleneck for quantum error mitigation and for the calibration, validation, and optimization of quantum error-correction protocols, especially in the presence of state preparation and measurement (SPAM) errors. Although cycle benchmarking can isolate some Pauli error components, it cannot resolve the problem of coupled error parameters, which leads to unlearnable degrees of freedom even in simple noisy gates, not to mention general nnn-qubit Clifford gates. Here we introduce mid-circuit-measurement-based generalized cycle benchmarking, a framework that makes otherwise unidentifiable Pauli fidelities and non-Markovian noise learnable via repeated measurements and classical post-processing. Applying the deferred feed-forward principle to generalized cycle benchmarking, we show that an insertion of mid-circuit measurements can reverse Pauli cycles induced by a general Clifford gate. This fact enables us to reveal a Pauli-noise learnability condition for Clifford gates. Assuming sufficient state preparation quality, we numerically demonstrate the feasibility of characterizing the previously unlearnable noise components. We implement the protocol on superconducting quantum processing units and validate its effectiveness in disambiguating the coupled noise components, benchmarked against conventional tomography. Finally, we observe consistent measurement-induced bit-flip bias and non-Markovian correlations, which define a range of applicability for the Pauli noise model and the proposed noise-characterization protocol.