Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2505.23622

Fast-tracking and disentangling of qubit noise fluctuations using minimal-data averaging and hierarchical discrete fluctuation auto-segmentation

Abhishek Agarwal, Lachlan P. Lindoy, Deep Lall, Sebastian E. de Graaf, T. Lindström, Ivan Rungger

Published May 29, 2025• 6 citations
arXivHTMLPDF

Abstract

Qubit noise and fluctuations of the noise over time are key factors limiting the performance of quantum computers. Characterising them with high temporal resolution is challenging due to multiple overlapping stochastic processes such as discrete jumps and continuous drifts. Hence, experiments typically probe individual sources of fluctuations rather than concurrent fluctuations caused by multiple sources. To overcome this limitation we develop a framework comprising a noise characterisation method with minimal measurements allowing high temporal resolution, combined with a hierarchical discrete fluctuation auto-segmentation tool to disentangle the overlapping fluctuations without human intervention, enabling their characterisation and tracking over long times. We show that on transmon qubits the method can track and disentangle qubit frequency fluctuations with temporal resolution of a few tens of milliseconds over hours. This enables us to identify the origins of the fluctuations as overlapping charge parity and two-level-systems switching. Beyond insights into the fluctuation origins, our method also provides information that can be used to improve qubit calibration, error mitigation and error correction.

DOI
10.48550/arxiv.2505.23622

Related papers

Time-resolved noise characterisation tool to track fluctuating noise effects in superconducting qubits

Abhishek Agarwal, Lachlan Lindoy, Deep Lall +2 more

Superconducting qubits have seen rapid increases in their coherence in the last few decades. However, instability in qubit parameters and their noise environment remains as a major challenge that limits the device performance. Qubit metrology to collectively measure and characterise different sources of noise and fluctuations is essential for accurately benchmarking devices but can be challenging, and typically different noise sources are characterised independently. In order to characterise the combined noise, we develop a tool that uses few-measurement data to detect and diagnose noise fluctuations, as well as a time series segmentation tool to further disambiguate different sources of fluctuations. We demonstrate the tool by computing time resolved properties of individual superconducting qubits. We find large changes of the dominating noise contributions, such as qubit frequency fluctuations, over both long time-scales of hours and days, and also over very short milli-seconds time-scales. We show that this information can be used alongside accurate noise models to learn physical properties of the coupled noise sources as well as benchmark device stability.

•Jan 1, 2025•0 citations

Real-Time Correlation of Relaxation, Dephasing, and Two-level System Dynamics in Transmon Qubits

Ambrose Yang, Alexander M. Young, Paal H. Prestegaard +13 more

Materials improvements in transmon qubits have yielded remarkable advances in qubit lifetimes (T1)and coherence times (T2). However, state-of-the-art superconducting qubits experience temporal fluctuations in their performance, which limit gate fidelities and quantum processor performance. We observe correlated increases in qubit relaxation and dephasing rates that last for minutes to hours, which we call T1 and T2 excursions. Using interleaved lifetime and coherence time measurements, noise spectroscopy, and two-level-system (TLS) spectroscopy, we find that these excursions are caused by single or few strongly-coupled TLS defects that spectrally diffuse into resonance with the qubit frequency. Our measurement protocol provides a powerful tool for understanding the noise sources that cause temporal fluctuations in superconducting qubit performance.

quant-pharXiv:2610.34485•Oct 27, 2026•0 citations

Real-Time Adaptive Tracking of Fluctuating Relaxation Rates in Superconducting Qubits

Fabrizio Berritta, Jacob Benestad, Jan A. Krzywda +17 more

The fidelity of operations on a solid-state quantum processor is fundamentally bounded by environmental decoherence. Characterizing environmental fluctuations is challenging because the acquisition time of nonadaptive experimental protocols limits temporal precision and can average out rapid features of the underlying dynamics. Here, we overcome this temporal-resolution limit by 2 orders of magnitude using a field-programmable gate-array powered classical controller that adaptively and continuously tracks the relaxation-time fluctuations of two fixed-frequency superconducting transmon qubits, which exhibit average relaxation times of approximately 0.17 ms and occasionally exceed 0.5 ms. We report events in which the relaxation time switches by nearly an order of magnitude over timescales of just tens of milliseconds, rather than minutes or hours as previously reported. Our real-time Bayesian estimation protocol estimates relaxation times within a few milliseconds, close to the decoherence timescale itself. Our statistical analysis further suggests that some of these fast fluctuations arise from two-level systems switching at rates up to 10 Hz, 4 orders of magnitude faster than earlier reports. These results redefine the timescales relevant for calibration in superconducting quantum processing units, establish a reference for rapid relaxation-rate characterization in device screening, and improve our understanding of fast relaxation dynamics.

arXiv:2506.09576•Physical Review X•Jan 5, 2026•9 citations

Towards autonomous time-calibration of large quantum-dot devices: Detection, real-time feedback, and noise spectroscopy

Anantha S. Rao, Barnaby van Straaten, Valentin John +8 more

The performance and scalability of semiconductor quantum-dot (QD) qubits are limited by electrostatic drift and charge noise that shift operating points and destabilize qubit parameters. As systems expand to large one- and two-dimensional arrays, manual recalibration becomes impractical, creating a need for autonomous stabilization frameworks. Here, we introduce a method that uses the full network of charge-transition lines in repeatedly acquired double-quantum-dot charge stability diagrams (CSDs) as a multidimensional probe of the local electrostatic environment. By accurately tracking the motion of selected transitions in time, we detect voltage drifts, identify abrupt charge reconfigurations, and apply compensating updates to maintain stable operating conditions. We demonstrate our approach on a 10-QD device, showing robust stabilization and real-time diagnostic access to dot-specific noise processes. The high acquisition rate of radio-frequency reflectometry CSD measurements also enables time-domain noise spectroscopy, allowing the extraction of noise power spectral densities, the identification of two-level fluctuators, and the analysis of spatial noise correlations across the array. From our analysis, we find that the background noise at 100~$μ$\si{\hertz} is dominated by drift with a power law of $1/f^2$, accompanied by a few dominant two-level fluctuators and an average linear correlation length of $(188 \pm 38)$~\si{\nano\meter} in the device. These capabilities form the basis of a scalable, autonomous calibration and characterization module for QD-based quantum processors, providing essential feedback for long-duration, high-fidelity qubit operations.

cond-mat.mes-hallCross-listedarXiv:2512.24894•Jan 1, 2026•2 citations

Adaptive Estimation of Drifting Noise in Quantum Error Correction

Devansh Bhardwaj, Evangelia Takou, Yingjia Lin +1 more

Advancing quantum information processors and building fault-tolerant architectures rely on the ability to accurately characterize the noise sources and suppress their impact on quantum devices. In practice, noise often drifts over time, whereas conventional noise characterization and decoding methods typically assume stationarity or provide only a time-average behavior of the noise. This treatment can result in suboptimal decoding performance. In this work, we present a rigorous analytical framework to capture time-dependent Pauli noise, by exploiting the syndrome statistics of quantum error correction experiments. We propose a sliding-window estimation method which allows us to recover the frequency components of the noise, by using optimal window sizes that we derive analytically. We prove the noise-filtering behavior of sliding windows, linking window size to spectral cutoff frequencies, and provide an iterative algorithm that captures multiple drift frequencies. We further introduce an overlapping window algorithm that enables us to capture rapid multi-frequency noise drifts in a single-pass fashion. Simulations for both phenomenological and circuit-level noise models validate our framework, demonstrating robust tracking of multi-frequency drift. The logical error rate obtained from our estimated models consistently align with the ground-truth logical error rate, and we find suppression of logical errors compared to static error models. Our window-based estimation methods and adaptive decoding offer new insights into noise spectroscopy and decoder optimization under drift using only syndrome data.

quant-pharXiv:2511.09491•PRX Quantum•Nov 13, 2025•13 citations

Development and experimental implementation of noise characterisation techniques on a superconducting quantum processor

Nelson M. M. Fernández, Francesco Grieco, Hetta Vappula +6 more

Noise characterisation not only enables error mitigation but also provides valuable information about the intrinsic performance of a quantum device, identifying dominant error contributions and bounding noise stability well beyond the aggregated calibration data. Deploying such methods on a specific hardware topology must combine efficiency and accuracy, assess noise stability, and validate the reconstructed noise model. Here we develop and implement these methods on a superconducting processor with square-lattice topology. First, we revise the cycle-benchmarking protocol and reduce the bias arising from unlearnable degrees of freedom via a regularised cost function. Second, we extend a previously developed tensor-network tomography method to match the device layout and show how its accuracy can be improved by repeated layer execution. Both methods allow approximate sublayer noise models to be extracted from parent ones. Using noise characterisation as a tool, we map the noise structure, track drift, and validate the adequacy of the learnt noise models against experimentally observed noisy estimations in benchmark physical and chemistry circuits. These results inform further improvements in the underlying technology and provide estimates of the size of noise-mitigated circuits that the device can support.

quant-pharXiv:2610.18000•Oct 14, 2026•0 citations
Qubit noise and fluctuations of the noise over time are key factors limiting the performance of quantum computers. Characterising them with high temporal resolution is challenging due to multiple overlapping stochastic processes such as discrete jumps and continuous drifts. Hence, experiments typically probe individual sources of fluctuations rather than concurrent fluctuations caused by multiple sources. To overcome this limitation we develop a framework comprising a noise characterisation method with minimal measurements allowing high temporal resolution, combined with a hierarchical discrete fluctuation auto-segmentation tool to disentangle the overlapping fluctuations without human intervention, enabling their characterisation and tracking over long times. We show that on transmon qubits the method can track and disentangle qubit frequency fluctuations with temporal resolution of a few tens of milliseconds over hours. This enables us to identify the origins of the fluctuations as overlapping charge parity and two-level-systems switching. Beyond insights into the fluctuation origins, our method also provides information that can be used to improve qubit calibration, error mitigation and error correction.
Superconducting qubits have seen rapid increases in their coherence in the last few decades. However, instability in qubit parameters and their noise environment remains as a major challenge that limits the device performance. Qubit metrology to collectively measure and characterise different sources of noise and fluctuations is essential for accurately benchmarking devices but can be challenging, and typically different noise sources are characterised independently. In order to characterise the combined noise, we develop a tool that uses few-measurement data to detect and diagnose noise fluctuations, as well as a time series segmentation tool to further disambiguate different sources of fluctuations. We demonstrate the tool by computing time resolved properties of individual superconducting qubits. We find large changes of the dominating noise contributions, such as qubit frequency fluctuations, over both long time-scales of hours and days, and also over very short milli-seconds time-scales. We show that this information can be used alongside accurate noise models to learn physical properties of the coupled noise sources as well as benchmark device stability.
Materials improvements in transmon qubits have yielded remarkable advances in qubit lifetimes (T1)and coherence times (T2). However, state-of-the-art superconducting qubits experience temporal fluctuations in their performance, which limit gate fidelities and quantum processor performance. We observe correlated increases in qubit relaxation and dephasing rates that last for minutes to hours, which we call T1 and T2 excursions. Using interleaved lifetime and coherence time measurements, noise spectroscopy, and two-level-system (TLS) spectroscopy, we find that these excursions are caused by single or few strongly-coupled TLS defects that spectrally diffuse into resonance with the qubit frequency. Our measurement protocol provides a powerful tool for understanding the noise sources that cause temporal fluctuations in superconducting qubit performance.
The fidelity of operations on a solid-state quantum processor is fundamentally bounded by environmental decoherence. Characterizing environmental fluctuations is challenging because the acquisition time of nonadaptive experimental protocols limits temporal precision and can average out rapid features of the underlying dynamics. Here, we overcome this temporal-resolution limit by 2 orders of magnitude using a field-programmable gate-array powered classical controller that adaptively and continuously tracks the relaxation-time fluctuations of two fixed-frequency superconducting transmon qubits, which exhibit average relaxation times of approximately 0.17 ms and occasionally exceed 0.5 ms. We report events in which the relaxation time switches by nearly an order of magnitude over timescales of just tens of milliseconds, rather than minutes or hours as previously reported. Our real-time Bayesian estimation protocol estimates relaxation times within a few milliseconds, close to the decoherence timescale itself. Our statistical analysis further suggests that some of these fast fluctuations arise from two-level systems switching at rates up to 10 Hz, 4 orders of magnitude faster than earlier reports. These results redefine the timescales relevant for calibration in superconducting quantum processing units, establish a reference for rapid relaxation-rate characterization in device screening, and improve our understanding of fast relaxation dynamics.
The performance and scalability of semiconductor quantum-dot (QD) qubits are limited by electrostatic drift and charge noise that shift operating points and destabilize qubit parameters. As systems expand to large one- and two-dimensional arrays, manual recalibration becomes impractical, creating a need for autonomous stabilization frameworks. Here, we introduce a method that uses the full network of charge-transition lines in repeatedly acquired double-quantum-dot charge stability diagrams (CSDs) as a multidimensional probe of the local electrostatic environment. By accurately tracking the motion of selected transitions in time, we detect voltage drifts, identify abrupt charge reconfigurations, and apply compensating updates to maintain stable operating conditions. We demonstrate our approach on a 10-QD device, showing robust stabilization and real-time diagnostic access to dot-specific noise processes. The high acquisition rate of radio-frequency reflectometry CSD measurements also enables time-domain noise spectroscopy, allowing the extraction of noise power spectral densities, the identification of two-level fluctuators, and the analysis of spatial noise correlations across the array. From our analysis, we find that the background noise at 100~μμμ\si{\hertz} is dominated by drift with a power law of 1/f21/f^21/f2, accompanied by a few dominant two-level fluctuators and an average linear correlation length of (188±38)(188 \pm 38)(188±38)~\si{\nano\meter} in the device. These capabilities form the basis of a scalable, autonomous calibration and characterization module for QD-based quantum processors, providing essential feedback for long-duration, high-fidelity qubit operations.
Advancing quantum information processors and building fault-tolerant architectures rely on the ability to accurately characterize the noise sources and suppress their impact on quantum devices. In practice, noise often drifts over time, whereas conventional noise characterization and decoding methods typically assume stationarity or provide only a time-average behavior of the noise. This treatment can result in suboptimal decoding performance. In this work, we present a rigorous analytical framework to capture time-dependent Pauli noise, by exploiting the syndrome statistics of quantum error correction experiments. We propose a sliding-window estimation method which allows us to recover the frequency components of the noise, by using optimal window sizes that we derive analytically. We prove the noise-filtering behavior of sliding windows, linking window size to spectral cutoff frequencies, and provide an iterative algorithm that captures multiple drift frequencies. We further introduce an overlapping window algorithm that enables us to capture rapid multi-frequency noise drifts in a single-pass fashion. Simulations for both phenomenological and circuit-level noise models validate our framework, demonstrating robust tracking of multi-frequency drift. The logical error rate obtained from our estimated models consistently align with the ground-truth logical error rate, and we find suppression of logical errors compared to static error models. Our window-based estimation methods and adaptive decoding offer new insights into noise spectroscopy and decoder optimization under drift using only syndrome data.
Noise characterisation not only enables error mitigation but also provides valuable information about the intrinsic performance of a quantum device, identifying dominant error contributions and bounding noise stability well beyond the aggregated calibration data. Deploying such methods on a specific hardware topology must combine efficiency and accuracy, assess noise stability, and validate the reconstructed noise model. Here we develop and implement these methods on a superconducting processor with square-lattice topology. First, we revise the cycle-benchmarking protocol and reduce the bias arising from unlearnable degrees of freedom via a regularised cost function. Second, we extend a previously developed tensor-network tomography method to match the device layout and show how its accuracy can be improved by repeated layer execution. Both methods allow approximate sublayer noise models to be extracted from parent ones. Using noise characterisation as a tool, we map the noise structure, track drift, and validate the adequacy of the learnt noise models against experimentally observed noisy estimations in benchmark physical and chemistry circuits. These results inform further improvements in the underlying technology and provide estimates of the size of noise-mitigated circuits that the device can support.