Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Mapping the positions of Two-Level-Systems on the surface of a superconducting transmon qubit

Jürgen Lisenfeld, Alexander K. Händel, Etienne Daum, Benedikt Berlitz, Alexander Bilmes, Alexey Vladimirovich Ustinov

Published Jan 1, 2026• 0 citations
Publisher

Abstract

The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of onchip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS’ resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit’s Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.

DOI
10.5445/ir/1000193546

Related papers

Mapping the positions of Two-Level-Systems on the surface of a superconducting transmon qubit

Jürgen Lisenfeld, Alexander K. Händel, Etienne Daum +3 more

The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of on-chip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS' resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit's Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.

quant-pharXiv:2511.05365•npj Quantum Information•Nov 10, 2025•8 citations

Resolving the positions of defects in superconducting quantum bits

Alexander Bilmes, A. Megrant, Paul Klimov +4 more

Solid-state quantum coherent devices are quickly progressing. Superconducting circuits, for instance, have already been used to demonstrate prototype quantum processors comprising a few tens of quantum bits. This development also revealed that a major part of decoherence and energy loss in such devices originates from a bath of parasitic material defects. However, neither the microscopic structure of defects nor the mechanisms by which they emerge during sample fabrication are understood. Here, we present a technique to obtain information on locations of defects relative to the thin film edge of the qubit circuit. Resonance frequencies of defects are tuned by exposing the qubit sample to electric fields generated by electrodes surrounding the chip. By determining the defect's coupling strength to each electrode and comparing it to a simulation of the field distribution, we obtain the probability at which location and at which interface the defect resides. This method is applicable to already existing samples of various qubit types, without further on-chip design changes. It provides a valuable tool for improving the material quality and nano-fabrication procedures towards more coherent quantum circuits.

arXiv:1911.08246•Scientific Reports•Feb 20, 2020•74 citations

Electric field spectroscopy of material defects in transmon qubits

Jürgen Lisenfeld, Alexander Bilmes, A. Megrant +6 more

Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only $$\approx$$ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.

arXiv:1909.09749•npj Quantum Information•Nov 22, 2019•184 citations

Localization and reduction of superconducting quantum coherent circuit losses

M. Virginia P. Altoé, Archan Banerjee, Cassidy Berk +16 more

Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of $27 μ$eV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (TLS) in amorphous dielectrics at circuit interfaces.[1] The electric fields driving oscillating charges in quantum circuits resonantly couple to TLS, producing phase noise and dissipation. We use coplanar niobium-on-silicon superconducting resonators to probe decoherence in quantum circuits. By selectively modifying interface dielectrics, we show that most TLS losses come from the silicon surface oxide, and most non-TLS losses are distributed throughout the niobium surface oxide. Through post-fabrication interface modification we reduced TLS losses by 85% and non-TLS losses by 72%, obtaining record single-photon resonator quality factors above 5 million and approaching a regime where non-TLS losses are dominant. [1]Müller, C., Cole, J. H. & Lisenfeld, J. Towards understanding two-level-systems in amorphous solids: insights from quantum circuits. Rep. Prog. Phys. 82, 124501 (2019)

arXiv:2012.07604•Dec 14, 2020•27 citations

Decoherence spectroscopy with individual two-level tunneling defects

Jürgen Lisenfeld, Alexander Bilmes, Shlomi Matityahu +7 more

Recent progress with microfabricated quantum devices has revealed that an ubiquitous source of noise originates in tunneling material defects that give rise to a sparse bath of parasitic two-level systems (TLSs). For superconducting qubits, TLSs residing on electrode surfaces and in tunnel junctions account for a major part of decoherence and thus pose a serious roadblock to the realization of solid-state quantum processors. Here, we utilize a superconducting qubit to explore the quantum state evolution of coherently operated TLSs in order to shed new light on their individual properties and environmental interactions. We identify a frequency-dependence of TLS energy relaxation rates that can be explained by a coupling to phononic modes rather than by anticipated mutual TLS interactions. Most investigated TLSs are found to be free of pure dephasing at their energy degeneracy points, around which their Ramsey and spin-echo dephasing rates scale linearly and quadratically with asymmetry energy, respectively. We provide an explanation based on the standard tunneling model, and identify interaction with incoherent low-frequency (thermal) TLSs as the major mechanism of the pure dephasing in coherent high-frequency TLS.

arXiv:1601.03213•Scientific Reports•Mar 31, 2016•95 citations

Readout failures in superconducting qubits due to TLS-defects in tunnel junctions

J. Lisenfeld, A. K. Händel, A. Bilmes +1 more

Material defects give rise to parasitic two-level systems (TLS) which present a major source of decoherence in superconducting qubits. Here, we study a strongly coupled TLS that resides in the tunnel barrier of transmon qubit. We use multi-photon spectroscopy and TLS strain tuning to explore the rich spectrum of the interacting three-partite system consisting of TLS, qubit, and its readout resonator. This reveals a strong effective resonant coupling between the TLS and the qubit's readout resonator which dresses the resonator states and results in a resonance frequency shift that spoils the readout signal. Our finding presents yet another way how material defects can interfere with qubit operation and hinder the realization of solid-state quantum processors.

quant-pharXiv:2605.02755•Physical Review Research•May 5, 2026•3 citations
The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of onchip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS’ resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit’s Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.
The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of on-chip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS' resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit's Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.
Solid-state quantum coherent devices are quickly progressing. Superconducting circuits, for instance, have already been used to demonstrate prototype quantum processors comprising a few tens of quantum bits. This development also revealed that a major part of decoherence and energy loss in such devices originates from a bath of parasitic material defects. However, neither the microscopic structure of defects nor the mechanisms by which they emerge during sample fabrication are understood. Here, we present a technique to obtain information on locations of defects relative to the thin film edge of the qubit circuit. Resonance frequencies of defects are tuned by exposing the qubit sample to electric fields generated by electrodes surrounding the chip. By determining the defect's coupling strength to each electrode and comparing it to a simulation of the field distribution, we obtain the probability at which location and at which interface the defect resides. This method is applicable to already existing samples of various qubit types, without further on-chip design changes. It provides a valuable tool for improving the material quality and nano-fabrication procedures towards more coherent quantum circuits.
Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only ≈\approx≈ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.
Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum regime, photons of 27μ27 μ27μeV at 6.5 GHz. Quantum coherence is fundamentally limited by materials defects, in particular atomic-scale parasitic two-level systems (TLS) in amorphous dielectrics at circuit interfaces.[1] The electric fields driving oscillating charges in quantum circuits resonantly couple to TLS, producing phase noise and dissipation. We use coplanar niobium-on-silicon superconducting resonators to probe decoherence in quantum circuits. By selectively modifying interface dielectrics, we show that most TLS losses come from the silicon surface oxide, and most non-TLS losses are distributed throughout the niobium surface oxide. Through post-fabrication interface modification we reduced TLS losses by 85% and non-TLS losses by 72%, obtaining record single-photon resonator quality factors above 5 million and approaching a regime where non-TLS losses are dominant. [1]Müller, C., Cole, J. H. & Lisenfeld, J. Towards understanding two-level-systems in amorphous solids: insights from quantum circuits. Rep. Prog. Phys. 82, 124501 (2019)
Recent progress with microfabricated quantum devices has revealed that an ubiquitous source of noise originates in tunneling material defects that give rise to a sparse bath of parasitic two-level systems (TLSs). For superconducting qubits, TLSs residing on electrode surfaces and in tunnel junctions account for a major part of decoherence and thus pose a serious roadblock to the realization of solid-state quantum processors. Here, we utilize a superconducting qubit to explore the quantum state evolution of coherently operated TLSs in order to shed new light on their individual properties and environmental interactions. We identify a frequency-dependence of TLS energy relaxation rates that can be explained by a coupling to phononic modes rather than by anticipated mutual TLS interactions. Most investigated TLSs are found to be free of pure dephasing at their energy degeneracy points, around which their Ramsey and spin-echo dephasing rates scale linearly and quadratically with asymmetry energy, respectively. We provide an explanation based on the standard tunneling model, and identify interaction with incoherent low-frequency (thermal) TLSs as the major mechanism of the pure dephasing in coherent high-frequency TLS.
Material defects give rise to parasitic two-level systems (TLS) which present a major source of decoherence in superconducting qubits. Here, we study a strongly coupled TLS that resides in the tunnel barrier of transmon qubit. We use multi-photon spectroscopy and TLS strain tuning to explore the rich spectrum of the interacting three-partite system consisting of TLS, qubit, and its readout resonator. This reveals a strong effective resonant coupling between the TLS and the qubit's readout resonator which dresses the resonator states and results in a resonance frequency shift that spoils the readout signal. Our finding presents yet another way how material defects can interfere with qubit operation and hinder the realization of solid-state quantum processors.