Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1911.08246 · Scientific Reports

Resolving the positions of defects in superconducting quantum bits

Alexander Bilmes, A. Megrant, Paul Klimov, Georg Weiss, John M. Martinis, Alexey V. Ustinov, Jürgen Lisenfeld

Published Feb 20, 2020• 74 citations
arXivHTMLPDF

Abstract

Solid-state quantum coherent devices are quickly progressing. Superconducting circuits, for instance, have already been used to demonstrate prototype quantum processors comprising a few tens of quantum bits. This development also revealed that a major part of decoherence and energy loss in such devices originates from a bath of parasitic material defects. However, neither the microscopic structure of defects nor the mechanisms by which they emerge during sample fabrication are understood. Here, we present a technique to obtain information on locations of defects relative to the thin film edge of the qubit circuit. Resonance frequencies of defects are tuned by exposing the qubit sample to electric fields generated by electrodes surrounding the chip. By determining the defect's coupling strength to each electrode and comparing it to a simulation of the field distribution, we obtain the probability at which location and at which interface the defect resides. This method is applicable to already existing samples of various qubit types, without further on-chip design changes. It provides a valuable tool for improving the material quality and nano-fabrication procedures towards more coherent quantum circuits.

DOI
10.1038/s41598-020-59749-y

Related papers

Electric field spectroscopy of material defects in transmon qubits

Jürgen Lisenfeld, Alexander Bilmes, A. Megrant +6 more

Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only $$\approx$$ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.

arXiv:1909.09749•npj Quantum Information•Nov 22, 2019•184 citations

Mapping the positions of Two-Level-Systems on the surface of a superconducting transmon qubit

Jürgen Lisenfeld, Alexander K. Händel, Etienne Daum +3 more

The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of on-chip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS' resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit's Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.

quant-pharXiv:2511.05365•npj Quantum Information•Nov 10, 2025•8 citations

Mapping the positions of Two-Level-Systems on the surface of a superconducting transmon qubit

Jürgen Lisenfeld, Alexander K. Händel, Etienne Daum +3 more

The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of onchip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS’ resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit’s Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.

•Jan 1, 2026•0 citations

Resolving locations of defects in superconducting transmon qubits

Alexander Bilmes

Despite tremendous progress of quantum computation with superconducting qubits, up-scaling for practical applications is hindered by decoherence and fluctuations induced by material defects. In this work, a qubit interface has been developed to study the microscopic nature of individual defects in a probe material. Further, a portable method has been developed to find locations of individual defects in ready-made qubit samples, which offers to test and improve micro-fabrication of qubits.

•Jan 1, 2019•6 citations

Enhancing the coherence of superconducting quantum bits with electric fields

Jürgen Lisenfeld, Alexander Bilmes, Alexey Vladimirovich Ustinov

Abstract In the endeavor to make quantum computers a reality, integrated superconducting circuits have become a promising architecture. A major challenge of this approach is decoherence originating from spurious atomic tunneling defects at the interfaces of qubit electrodes, which may resonantly absorb energy from the qubit’s oscillating electric field and reduce the qubit’s energy relaxation time T 1 . Here, we show that qubit coherence can be improved by tuning dominating defects away from the qubit resonance using an applied DC-electric field. We demonstrate a method that optimizes the applied field bias and enhances the average qubit T 1 time by 23%. We also discuss how local gate electrodes can be implemented in superconducting quantum processors to enable simultaneous in situ coherence optimization of individual qubits.

arXiv:2208.01570•npj Quantum Information•Jan 25, 2023•33 citations

Simulating Quantum Chemical Dynamics with Improved Superconducting Qubits

A. Megrant

A quantum computer will potentially solve far-reaching problems which are currently intractable on any classical computer. Many technological obstacles have prevented the realization of a quantum computer, the main obstacle being decoherence, which is the loss of quantum information. Decoherence arises from the undesired interaction between qubits and their environment. Isolated qubits have better coherence but are more difficult to control. Superconducting qubits are a promising platform since their macroscopic size allows for easy control and coupling to other qubits. While the coherence of superconducting qubits has substantially improved over the past two decades, further improvements in coherence are required.We have repeatedly and reliably increased the coherence times of superconducting qubits. Currently decoherence in these devices is dominated by coupling to material defects. These defects are present in the dielectrics used to fabricate these devices or introduced during fabrication. Using simpler resonators as a testbed, we individually isolate, characterize, and then improve each step of the more complicated fabrication of superconducting qubits. We increased the quality factor of resonators by a factor of four by first identifying the surfaces and interfaces as a major source of loss and then by optimizing the substrate preparation. Furthermore, we measure and subsequently mitigate additional defect loss, which is dependent on the position of ground plane holes used to limit the loss from magnetic vortices. Implementing these improvements led to an increase of our qubit coherence times by more than an order of magnitude.The progress made in coherence while maintaining a high degree of connectivity and controllability has been directly used in more complex circuits. One such device is a fully connected three qubit ring with both tunable qubit frequencies and adjustable qubit-qubit couplings. The considerable level of control allows us to generate the quantum dynamics resulting from a collision between Na and He atoms by encoding the problem into a time-dependent multi-qubit interaction. We compute a scattering cross section by measuring the probability of exciting the Na atom over a wide range of collision parameters. The scattering cross-section shows that there is a velocity where the excitation probability is maximized, in agreement with scattering experiments.

•Jan 1, 2016•1 citation
Solid-state quantum coherent devices are quickly progressing. Superconducting circuits, for instance, have already been used to demonstrate prototype quantum processors comprising a few tens of quantum bits. This development also revealed that a major part of decoherence and energy loss in such devices originates from a bath of parasitic material defects. However, neither the microscopic structure of defects nor the mechanisms by which they emerge during sample fabrication are understood. Here, we present a technique to obtain information on locations of defects relative to the thin film edge of the qubit circuit. Resonance frequencies of defects are tuned by exposing the qubit sample to electric fields generated by electrodes surrounding the chip. By determining the defect's coupling strength to each electrode and comparing it to a simulation of the field distribution, we obtain the probability at which location and at which interface the defect resides. This method is applicable to already existing samples of various qubit types, without further on-chip design changes. It provides a valuable tool for improving the material quality and nano-fabrication procedures towards more coherent quantum circuits.
Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only ≈\approx≈ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.
The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of on-chip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS' resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit's Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.
The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of onchip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS’ resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit’s Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.
Abstract In the endeavor to make quantum computers a reality, integrated superconducting circuits have become a promising architecture. A major challenge of this approach is decoherence originating from spurious atomic tunneling defects at the interfaces of qubit electrodes, which may resonantly absorb energy from the qubit’s oscillating electric field and reduce the qubit’s energy relaxation time T 1 . Here, we show that qubit coherence can be improved by tuning dominating defects away from the qubit resonance using an applied DC-electric field. We demonstrate a method that optimizes the applied field bias and enhances the average qubit T 1 time by 23%. We also discuss how local gate electrodes can be implemented in superconducting quantum processors to enable simultaneous in situ coherence optimization of individual qubits.
A quantum computer will potentially solve far-reaching problems which are currently intractable on any classical computer. Many technological obstacles have prevented the realization of a quantum computer, the main obstacle being decoherence, which is the loss of quantum information. Decoherence arises from the undesired interaction between qubits and their environment. Isolated qubits have better coherence but are more difficult to control. Superconducting qubits are a promising platform since their macroscopic size allows for easy control and coupling to other qubits. While the coherence of superconducting qubits has substantially improved over the past two decades, further improvements in coherence are required.We have repeatedly and reliably increased the coherence times of superconducting qubits. Currently decoherence in these devices is dominated by coupling to material defects. These defects are present in the dielectrics used to fabricate these devices or introduced during fabrication. Using simpler resonators as a testbed, we individually isolate, characterize, and then improve each step of the more complicated fabrication of superconducting qubits. We increased the quality factor of resonators by a factor of four by first identifying the surfaces and interfaces as a major source of loss and then by optimizing the substrate preparation. Furthermore, we measure and subsequently mitigate additional defect loss, which is dependent on the position of ground plane holes used to limit the loss from magnetic vortices. Implementing these improvements led to an increase of our qubit coherence times by more than an order of magnitude.The progress made in coherence while maintaining a high degree of connectivity and controllability has been directly used in more complex circuits. One such device is a fully connected three qubit ring with both tunable qubit frequencies and adjustable qubit-qubit couplings. The considerable level of control allows us to generate the quantum dynamics resulting from a collision between Na and He atoms by encoding the problem into a time-dependent multi-qubit interaction. We compute a scattering cross section by measuring the probability of exciting the Na atom over a wide range of collision parameters. The scattering cross-section shows that there is a velocity where the excitation probability is maximized, in agreement with scattering experiments.