Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1909.09749 · npj Quantum Information

Electric field spectroscopy of material defects in transmon qubits

Jürgen Lisenfeld, Alexander Bilmes, A. Megrant, R. Barends, J. Kelly, Paul V. Klimov, Georg Weiss, John M. Martinis, Alexey Vladimirovich Ustinov

Published Nov 22, 2019• 184 citations
arXivHTMLPDF

Abstract

Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only $$\approx$$ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.

DOI
10.1038/s41534-019-0224-1

Related papers

Resolving the positions of defects in superconducting quantum bits

Alexander Bilmes, A. Megrant, Paul Klimov +4 more

Solid-state quantum coherent devices are quickly progressing. Superconducting circuits, for instance, have already been used to demonstrate prototype quantum processors comprising a few tens of quantum bits. This development also revealed that a major part of decoherence and energy loss in such devices originates from a bath of parasitic material defects. However, neither the microscopic structure of defects nor the mechanisms by which they emerge during sample fabrication are understood. Here, we present a technique to obtain information on locations of defects relative to the thin film edge of the qubit circuit. Resonance frequencies of defects are tuned by exposing the qubit sample to electric fields generated by electrodes surrounding the chip. By determining the defect's coupling strength to each electrode and comparing it to a simulation of the field distribution, we obtain the probability at which location and at which interface the defect resides. This method is applicable to already existing samples of various qubit types, without further on-chip design changes. It provides a valuable tool for improving the material quality and nano-fabrication procedures towards more coherent quantum circuits.

arXiv:1911.08246•Scientific Reports•Feb 20, 2020•74 citations

Mapping the positions of Two-Level-Systems on the surface of a superconducting transmon qubit

Jürgen Lisenfeld, Alexander K. Händel, Etienne Daum +3 more

The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of on-chip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS' resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit's Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.

quant-pharXiv:2511.05365•npj Quantum Information•Nov 10, 2025•8 citations

Mapping the positions of Two-Level-Systems on the surface of a superconducting transmon qubit

Jürgen Lisenfeld, Alexander K. Händel, Etienne Daum +3 more

The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of onchip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS’ resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit’s Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.

•Jan 1, 2026•0 citations

Multi-Modal Atomic-Scale Characterization of Interfacial Defects in Superconducting Transmon Qubits

Kassandra Weber, Jaeyel Lee, Akshay A. Murthy +1 more

In superconducting transmon qubits, macroscopic characterization is the primary method for probing performance metrics, such as relaxation T1 and dephasing T2 times, resonance frequency, and quality factor. While these measurements can aid our understanding of the dielectric loss of a transmon, they do not allow us to characterize the structural and chemical inhomogeneity of the interfaces which directly impacts this energy loss. These fundamental materials problems must be studied using transmission electron microscopy (TEM) to provide insight into these defects across different qubit interfaces at an atomic scale. In this contribution, we will examine qubits, such as those shown in Figure 1, fabricated at Fermi National Accelerator Laboratory (SQMS Center) [1]. The qubit devices consist of superconducting metal base layers, typically sputter deposited Nb or Ta, and Al/AlOx/Al junctions, where the AlOx barrier is roughly 3nm in thickness and prepared through in-situ oxidation [2]. Characterizing this system prior to its integration within a superconducting radio frequency cavity establishes a baseline for the system, allowing us to isolate fabrication-induced defects before they manifest in performance degradation during quantum measurements. With the samples and fabrication process well known on a macroscopic scale, we study the atomic structure and chemistry of different heterointerfaces within the Josephson junction (JJ) of the transmon qubit and between the sapphire substrate and Nb resonator pads to identify potential defects contributing to the decoherence for qubits constructed with particular geometries. To resolve these defects, atomic-resolution imaging, energy-dispersive X-ray spectroscopy (EDS), and electron-energy loss spectroscopy (EELS) are performed using the JEOL-ARM200CF, an aberration-corrected scanning transmission electron microscope (STEM). Figure 2 provides a clear image of the stacked layers formed as the JJ, but with the addition of a platinum and carbon protective coating added during the focus ion beam (FIB) milling process to preserve pristine Al/AlOx/Al interfaces. 4D-STEM approaches, such as ptychography, orientation mapping and nanoscale diffraction will be employed to further study the layered interfaces and defects in real space and reciprocal space. These techniques can also provide insight into any damage that incurs during lamella preparation using the FIB [3]. Magnetic field-free atomic resolution imaging, differential phase contrast mapping, and monochromated EELS can be achieved using the new MARS-MONO STEM (JEM-Z200MF) without inducing current fluctuations or magnetic field related distortions [4]. By integrating this work across the functional interfaces of the transmon qubits and their different geometries, we will identify possible structural and chemical defects which limit device performance using our multi-modal approach [5]. SQMS fabricated transmon qubits fabricated on HEMEX sapphire substrate imaged via a) ZEISS optical microscope, b) SEM and c) EDS. TEM image of Josephson Junction layered interface at on JEOL-ARM200CF on the ClearView camera with a 200kV accelerating voltage.

Microscopy and Microanalysis•Jul 1, 2026•0 citations

Readout failures in superconducting qubits due to TLS-defects in tunnel junctions

J. Lisenfeld, A. K. Händel, A. Bilmes +1 more

Material defects give rise to parasitic two-level systems (TLS) which present a major source of decoherence in superconducting qubits. Here, we study a strongly coupled TLS that resides in the tunnel barrier of transmon qubit. We use multi-photon spectroscopy and TLS strain tuning to explore the rich spectrum of the interacting three-partite system consisting of TLS, qubit, and its readout resonator. This reveals a strong effective resonant coupling between the TLS and the qubit's readout resonator which dresses the resonator states and results in a resonance frequency shift that spoils the readout signal. Our finding presents yet another way how material defects can interfere with qubit operation and hinder the realization of solid-state quantum processors.

quant-pharXiv:2605.02755•Physical Review Research•May 5, 2026•3 citations

Probing defect densities at the edges and inside Josephson junctions of superconducting qubits

Alexander Bilmes, Serhii Volosheniuk, Alexey Vladimirovich Ustinov +1 more

Abstract Tunneling defects in disordered materials form spurious two-level systems which are a major source of decoherence for micro-fabricated quantum devices. For superconducting qubits, defects in tunnel barriers of submicrometer-sized Josephson junctions couple strongest to the qubit, which necessitates optimization of the junction fabrication to mitigate defect formation. Here, we investigate whether defects appear predominantly at the edges or deep within the amorphous tunnel barrier of a junction. For this, we compare defect densities in differently shaped Al/AlO x /Al Josephson junctions that are part of a Transmon qubit. We observe that the number of detectable junction-defects is proportional to the junction area, and does not significantly scale with the junction’s circumference, which proposes that defects are evenly distributed inside the tunnel barrier. Moreover, we find very similar defect densities in thermally grown tunnel barriers that were formed either directly after the base electrode was deposited, or in a separate deposition step after removal of native oxide by Argon ion milling.

arXiv:2108.06555•npj Quantum Information•Mar 7, 2022•37 citations
Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only ≈\approx≈ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.
Solid-state quantum coherent devices are quickly progressing. Superconducting circuits, for instance, have already been used to demonstrate prototype quantum processors comprising a few tens of quantum bits. This development also revealed that a major part of decoherence and energy loss in such devices originates from a bath of parasitic material defects. However, neither the microscopic structure of defects nor the mechanisms by which they emerge during sample fabrication are understood. Here, we present a technique to obtain information on locations of defects relative to the thin film edge of the qubit circuit. Resonance frequencies of defects are tuned by exposing the qubit sample to electric fields generated by electrodes surrounding the chip. By determining the defect's coupling strength to each electrode and comparing it to a simulation of the field distribution, we obtain the probability at which location and at which interface the defect resides. This method is applicable to already existing samples of various qubit types, without further on-chip design changes. It provides a valuable tool for improving the material quality and nano-fabrication procedures towards more coherent quantum circuits.
The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of on-chip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS' resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit's Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.
The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of onchip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS’ resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit’s Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.
In superconducting transmon qubits, macroscopic characterization is the primary method for probing performance metrics, such as relaxation T1 and dephasing T2 times, resonance frequency, and quality factor. While these measurements can aid our understanding of the dielectric loss of a transmon, they do not allow us to characterize the structural and chemical inhomogeneity of the interfaces which directly impacts this energy loss. These fundamental materials problems must be studied using transmission electron microscopy (TEM) to provide insight into these defects across different qubit interfaces at an atomic scale. In this contribution, we will examine qubits, such as those shown in Figure 1, fabricated at Fermi National Accelerator Laboratory (SQMS Center) [1]. The qubit devices consist of superconducting metal base layers, typically sputter deposited Nb or Ta, and Al/AlOx/Al junctions, where the AlOx barrier is roughly 3nm in thickness and prepared through in-situ oxidation [2]. Characterizing this system prior to its integration within a superconducting radio frequency cavity establishes a baseline for the system, allowing us to isolate fabrication-induced defects before they manifest in performance degradation during quantum measurements. With the samples and fabrication process well known on a macroscopic scale, we study the atomic structure and chemistry of different heterointerfaces within the Josephson junction (JJ) of the transmon qubit and between the sapphire substrate and Nb resonator pads to identify potential defects contributing to the decoherence for qubits constructed with particular geometries. To resolve these defects, atomic-resolution imaging, energy-dispersive X-ray spectroscopy (EDS), and electron-energy loss spectroscopy (EELS) are performed using the JEOL-ARM200CF, an aberration-corrected scanning transmission electron microscope (STEM). Figure 2 provides a clear image of the stacked layers formed as the JJ, but with the addition of a platinum and carbon protective coating added during the focus ion beam (FIB) milling process to preserve pristine Al/AlOx/Al interfaces. 4D-STEM approaches, such as ptychography, orientation mapping and nanoscale diffraction will be employed to further study the layered interfaces and defects in real space and reciprocal space. These techniques can also provide insight into any damage that incurs during lamella preparation using the FIB [3]. Magnetic field-free atomic resolution imaging, differential phase contrast mapping, and monochromated EELS can be achieved using the new MARS-MONO STEM (JEM-Z200MF) without inducing current fluctuations or magnetic field related distortions [4]. By integrating this work across the functional interfaces of the transmon qubits and their different geometries, we will identify possible structural and chemical defects which limit device performance using our multi-modal approach [5]. SQMS fabricated transmon qubits fabricated on HEMEX sapphire substrate imaged via a) ZEISS optical microscope, b) SEM and c) EDS. TEM image of Josephson Junction layered interface at on JEOL-ARM200CF on the ClearView camera with a 200kV accelerating voltage.
Material defects give rise to parasitic two-level systems (TLS) which present a major source of decoherence in superconducting qubits. Here, we study a strongly coupled TLS that resides in the tunnel barrier of transmon qubit. We use multi-photon spectroscopy and TLS strain tuning to explore the rich spectrum of the interacting three-partite system consisting of TLS, qubit, and its readout resonator. This reveals a strong effective resonant coupling between the TLS and the qubit's readout resonator which dresses the resonator states and results in a resonance frequency shift that spoils the readout signal. Our finding presents yet another way how material defects can interfere with qubit operation and hinder the realization of solid-state quantum processors.
Abstract Tunneling defects in disordered materials form spurious two-level systems which are a major source of decoherence for micro-fabricated quantum devices. For superconducting qubits, defects in tunnel barriers of submicrometer-sized Josephson junctions couple strongest to the qubit, which necessitates optimization of the junction fabrication to mitigate defect formation. Here, we investigate whether defects appear predominantly at the edges or deep within the amorphous tunnel barrier of a junction. For this, we compare defect densities in differently shaped Al/AlO x /Al Josephson junctions that are part of a Transmon qubit. We observe that the number of detectable junction-defects is proportional to the junction area, and does not significantly scale with the junction’s circumference, which proposes that defects are evenly distributed inside the tunnel barrier. Moreover, we find very similar defect densities in thermally grown tunnel barriers that were formed either directly after the base electrode was deposited, or in a separate deposition step after removal of native oxide by Argon ion milling.