Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

変位雑音フリー干渉計を用いた量子非破壊測定

光純 白澤, Koya SHIRASAWA

Published Mar 31, 2017• 0 citations
Publisher

Abstract

Displacement-noise-free interferometer (DFI) has developed for gravitational-wave (GW) detection free from any kind of displacement noise, which limits sensitivity of conventional laser interferometer GW detectors. The DFI mechanism can be also applied to quantum radiation pressure noise (RPN) in principle, and thus DFI allows ultrasensitive sensing beyond the so-called standard quantum limit. Namely, DFI can be a quantum-non-demolition (QND) measurement device for GW detection. The goal of this study is to examine the QND characteristics by cancelling RPN after observing it. Since not only obtaining the two signals which have same displacement information on the mirrors for the DFI system but amplifying the incident laser power to observe RPN are required for the experiment, I contrived a new optical design, a bidirectional triangular ring cavity DFI (RC-DFI). In this thesis, I introduced superiority of the optical system as compared to Mach-Zehnder type, and furthermore I demonstrated length control experiment of the cavity for verifying whether the noise cancellation ability on the above optical system will be still confirmed. Key Words: Gravitational-wave, Displacement-noise-free interferometry, Quantum-non-demolition measurement

DOI
10.15002/00014344

Related papers

Quantum Precision Limits of Displacement Noise-Free Interferometers

Tuvia Gefen, Rajashik Tarafder, R. X. Adhikari +1 more

Current laser-interferometric gravitational wave detectors suffer from a fundamental limit to their precision due to the displacement noise of optical elements contributed by various sources. Several schemes for displacement noise-free interferometers (DFI) have been proposed to mitigate their effects. The idea behind these schemes is similar to decoherence-free subspaces in quantum sensing; i.e., certain modes contain information about the gravitational waves but are insensitive to the mirror motion (displacement noise). We derive quantum precision limits for general DFI schemes, including optimal measurement basis and optimal squeezing schemes. We introduce a triangular cavity DFI scheme and apply our general bounds to it. Precision analysis of this scheme with different noise models shows that the DFI property leads to interesting sensitivity profiles and improved precision due to noise mitigation and larger gain from squeezing.

arXiv:2209.02998•Physical Review Letters•Jan 8, 2024•12 citations

Noise cancellation properties of displacement noise free interferometer

Shuichi Sato, Seiji Kawamura, A. Nishizawa +1 more

We have demonstrated the practical feasibility of a displacement- and frequency-noise-free laser interferometer (DFI) by partially implementing a recently proposed optical configuration using bi-directional Mach-Zehnder interferometers (MZIs). The noise cancellation efficiency was evaluated by comparing the displacement noise spectrum of the MZIs and the DFI, demonstrating up to 50 dB of noise cancellation. In addition, the possible extension of DFI as QND device is explored.

Journal of Physics Conference Series•May 1, 2010•0 citations

Ultrasensitive optical measurement of thermal and quantum noises

T. Caniard, Tristan Briant, P.-F. Cohadon +2 more

We have developed an experiment of ultrasensitive interferometric measurement of small displacements based on a high-finesse Fabry-Perot cavity. We have observed the internal thermal noise of mirrors and fully characterized their acoustics modes with a sensitivity of 3 × 10 −20 m/Hz 1/2 . This unique sensitivity is a step towards the first observation of the radiation pressure effects and the resulting standard quantum limit in interferometric measurements. Our experiment may become a powerful facility to test quantum noise reduction schemes such as the use of squeezed light or quantum locking of mirrors. As a first result, we present the observation of a cancellation of radiation pressure effects in our cavity. This back-action noise cancellation was first proposed within the framework of gravitational-wave detection with dual resonators, and may drastically improve the sensitivity of such measurements.

Optics and Spectroscopy•Aug 1, 2007•6 citations

EPR-based quantum noise reduction in future gravitational-wave detectors: control and optomechanical integration of the SIPS interferometer

Wajid Ali

General relativity predicts the existence of Gravitational Waves (GWs), ripples in spacetime that are now observable to highly sensitive interferometers. However, Quantum Noise (QN) poses a significant challenge for Gravitational Wave (GW) interferometers, influencing the entire bandwidth range (10-10,000 Hz) of the current GW detectors. At higher frequencies, Shot Noise (SN) predominates, while at lower frequencies, Radiation Pressure Noise (RPN) becomes the limiting factor, reducing both sensitivity and measurement precision. Squeezing techniques are implemented to address this issue by confining uncertainty within one quadrature of the light field. During O4, LIGO successfully implemented Frequency-Dependent Squeezing (FDS), while Virgo integrated and commissioned the FDS system without actively operating it during the science run. By employing a 300-meterlong detuned Filter Cavity (FC), the squeezing ellipse is rotated, allowing phase squeezing at high frequencies to reduce and amplitude squeezing at low frequencies to mitigate RPN, ultimately refining detection capabilities across the frequency spectrum. This doctoral thesis focuses on a promising alternative technique for future GW detectors, that achieves broadband QN reduction by exploiting Einstein–Podolsky–Rosen (EPR) quantum entanglement. This approach involves injecting two entangled, squeezed beams at different frequencies into the dark port of the interferometer, enabling it to act as both a FC and a GW detector. To experimentally investigate these techniques, the suspended Interferometer for Ponderomotive Squeezing (SIPS) platform adopts a large-scale GW detector layout featuring a Michelson configuration with Fabry-Perot (FP) arm cavities. To guarantee the extreme optical alignment necessary for quantum noise mitigation, a high-precision, real-time local control system was developed for the SIPS main optics. Using a dummy mirror suspended in a double-pendulum configuration with monolithic fibers, a custom real-time signal processing and feedback control architecture was developed. This subsystem utilizes a PXI hardware framework and position-sensitive detectors (Power Spectral Densitys (PSDs)) implemented in LabVIEW to actively damp the mechanical resonances of the suspensions. Extending these core activities toward future infrastructures, this work directly contributed to the realization and commissioning of the new PNRR ETIC-GALILEO quantum optics cleanroom facility in Genoa for the Einstein Telescope (ET). Within this infrastructure, preliminary optical studies were initiated for Einstein Telescope Low Frequency (ET-LF) low-loss Faraday isolators operating at 1550 nm. Concurrently, numerical simulations were performed using Finesse3 to model and investigate candidate excess noise sources currently limiting the sensitivity of Advanced Virgo Plus

•Sep 3, 2026•0 citations

Gravitational wave detection using laser interferometry beyond the standard quantum limit

M. Heurs

Interferometric gravitational wave detectors (such as advanced LIGO) employ high-power solid-state lasers to maximize their detection sensitivity and hence their reach into the universe. These sophisticated light sources are ultra-stabilized with regard to output power, emission frequency and beam geometry; this is crucial to obtain low detector noise. However, even when all laser noise is reduced as far as technically possible, unavoidable quantum noise of the laser still remains. This is a consequence of the Heisenberg Uncertainty Principle, the basis of quantum mechanics: in this case, it is fundamentally impossible to simultaneously reduce both the phase noise and the amplitude noise of a laser to arbitrarily low levels. This fact manifests in the detector noise budget as two distinct noise sources—photon shot noise and quantum radiation pressure noise—which together form a lower boundary for current-day gravitational wave detector sensitivities, the standard quantum limit of interferometry. To overcome this limit, various techniques are being proposed, among them different uses of non-classical light and alternative interferometer topologies. This article explains how quantum noise enters and manifests in an interferometric gravitational wave detector, and gives an overview of some of the schemes proposed to overcome this seemingly fundamental limitation, all aimed at the goal of higher gravitational wave event detection rates. This article is part of a discussion meeting issue ‘The promises of gravitational-wave astronomy’.

Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences•Apr 16, 2018•11 citations

Backaction Amplification and Quantum Limits in Optomechanical Measurements

P. Verlot, Alexandros Tavernarakis, Tristan Briant +2 more

Optical interferometry is by far the most sensitive displacement measurement technique available, with sensitivities at the 10(-20) m/square root(Hz) level in the large-scale gravitational-wave interferometers currently in operation. Second-generation interferometers will experience a tenfold improvement in sensitivity and be mainly limited by quantum noise, close to the standard quantum limit (SQL), once considered as the ultimate displacement sensitivity achievable by interferometry. In this Letter, we experimentally demonstrate one of the techniques envisioned to go beyond the SQL: amplification of a signal by radiation-pressure backaction in a detuned cavity.

arXiv:0912.4085•Physical Review Letters•Mar 31, 2010•108 citations
Displacement-noise-free interferometer (DFI) has developed for gravitational-wave (GW) detection free from any kind of displacement noise, which limits sensitivity of conventional laser interferometer GW detectors. The DFI mechanism can be also applied to quantum radiation pressure noise (RPN) in principle, and thus DFI allows ultrasensitive sensing beyond the so-called standard quantum limit. Namely, DFI can be a quantum-non-demolition (QND) measurement device for GW detection. The goal of this study is to examine the QND characteristics by cancelling RPN after observing it. Since not only obtaining the two signals which have same displacement information on the mirrors for the DFI system but amplifying the incident laser power to observe RPN are required for the experiment, I contrived a new optical design, a bidirectional triangular ring cavity DFI (RC-DFI). In this thesis, I introduced superiority of the optical system as compared to Mach-Zehnder type, and furthermore I demonstrated length control experiment of the cavity for verifying whether the noise cancellation ability on the above optical system will be still confirmed. Key Words: Gravitational-wave, Displacement-noise-free interferometry, Quantum-non-demolition measurement
Current laser-interferometric gravitational wave detectors suffer from a fundamental limit to their precision due to the displacement noise of optical elements contributed by various sources. Several schemes for displacement noise-free interferometers (DFI) have been proposed to mitigate their effects. The idea behind these schemes is similar to decoherence-free subspaces in quantum sensing; i.e., certain modes contain information about the gravitational waves but are insensitive to the mirror motion (displacement noise). We derive quantum precision limits for general DFI schemes, including optimal measurement basis and optimal squeezing schemes. We introduce a triangular cavity DFI scheme and apply our general bounds to it. Precision analysis of this scheme with different noise models shows that the DFI property leads to interesting sensitivity profiles and improved precision due to noise mitigation and larger gain from squeezing.
We have developed an experiment of ultrasensitive interferometric measurement of small displacements based on a high-finesse Fabry-Perot cavity. We have observed the internal thermal noise of mirrors and fully characterized their acoustics modes with a sensitivity of 3 × 10 −20 m/Hz 1/2 . This unique sensitivity is a step towards the first observation of the radiation pressure effects and the resulting standard quantum limit in interferometric measurements. Our experiment may become a powerful facility to test quantum noise reduction schemes such as the use of squeezed light or quantum locking of mirrors. As a first result, we present the observation of a cancellation of radiation pressure effects in our cavity. This back-action noise cancellation was first proposed within the framework of gravitational-wave detection with dual resonators, and may drastically improve the sensitivity of such measurements.
General relativity predicts the existence of Gravitational Waves (GWs), ripples in spacetime that are now observable to highly sensitive interferometers. However, Quantum Noise (QN) poses a significant challenge for Gravitational Wave (GW) interferometers, influencing the entire bandwidth range (10-10,000 Hz) of the current GW detectors. At higher frequencies, Shot Noise (SN) predominates, while at lower frequencies, Radiation Pressure Noise (RPN) becomes the limiting factor, reducing both sensitivity and measurement precision. Squeezing techniques are implemented to address this issue by confining uncertainty within one quadrature of the light field. During O4, LIGO successfully implemented Frequency-Dependent Squeezing (FDS), while Virgo integrated and commissioned the FDS system without actively operating it during the science run. By employing a 300-meterlong detuned Filter Cavity (FC), the squeezing ellipse is rotated, allowing phase squeezing at high frequencies to reduce and amplitude squeezing at low frequencies to mitigate RPN, ultimately refining detection capabilities across the frequency spectrum. This doctoral thesis focuses on a promising alternative technique for future GW detectors, that achieves broadband QN reduction by exploiting Einstein–Podolsky–Rosen (EPR) quantum entanglement. This approach involves injecting two entangled, squeezed beams at different frequencies into the dark port of the interferometer, enabling it to act as both a FC and a GW detector. To experimentally investigate these techniques, the suspended Interferometer for Ponderomotive Squeezing (SIPS) platform adopts a large-scale GW detector layout featuring a Michelson configuration with Fabry-Perot (FP) arm cavities. To guarantee the extreme optical alignment necessary for quantum noise mitigation, a high-precision, real-time local control system was developed for the SIPS main optics. Using a dummy mirror suspended in a double-pendulum configuration with monolithic fibers, a custom real-time signal processing and feedback control architecture was developed. This subsystem utilizes a PXI hardware framework and position-sensitive detectors (Power Spectral Densitys (PSDs)) implemented in LabVIEW to actively damp the mechanical resonances of the suspensions. Extending these core activities toward future infrastructures, this work directly contributed to the realization and commissioning of the new PNRR ETIC-GALILEO quantum optics cleanroom facility in Genoa for the Einstein Telescope (ET). Within this infrastructure, preliminary optical studies were initiated for Einstein Telescope Low Frequency (ET-LF) low-loss Faraday isolators operating at 1550 nm. Concurrently, numerical simulations were performed using Finesse3 to model and investigate candidate excess noise sources currently limiting the sensitivity of Advanced Virgo Plus
Interferometric gravitational wave detectors (such as advanced LIGO) employ high-power solid-state lasers to maximize their detection sensitivity and hence their reach into the universe. These sophisticated light sources are ultra-stabilized with regard to output power, emission frequency and beam geometry; this is crucial to obtain low detector noise. However, even when all laser noise is reduced as far as technically possible, unavoidable quantum noise of the laser still remains. This is a consequence of the Heisenberg Uncertainty Principle, the basis of quantum mechanics: in this case, it is fundamentally impossible to simultaneously reduce both the phase noise and the amplitude noise of a laser to arbitrarily low levels. This fact manifests in the detector noise budget as two distinct noise sources—photon shot noise and quantum radiation pressure noise—which together form a lower boundary for current-day gravitational wave detector sensitivities, the standard quantum limit of interferometry. To overcome this limit, various techniques are being proposed, among them different uses of non-classical light and alternative interferometer topologies. This article explains how quantum noise enters and manifests in an interferometric gravitational wave detector, and gives an overview of some of the schemes proposed to overcome this seemingly fundamental limitation, all aimed at the goal of higher gravitational wave event detection rates. This article is part of a discussion meeting issue ‘The promises of gravitational-wave astronomy’.
Optical interferometry is by far the most sensitive displacement measurement technique available, with sensitivities at the 10(-20) m/square root(Hz) level in the large-scale gravitational-wave interferometers currently in operation. Second-generation interferometers will experience a tenfold improvement in sensitivity and be mainly limited by quantum noise, close to the standard quantum limit (SQL), once considered as the ultimate displacement sensitivity achievable by interferometry. In this Letter, we experimentally demonstrate one of the techniques envisioned to go beyond the SQL: amplification of a signal by radiation-pressure backaction in a detuned cavity.