Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Sensors Journal

Electromagnetic Analysis and Resonance-Based Optimization of Atomic Vapor Cells for Enhanced Accuracy and Sensitivity in Rydberg RF Sensors

Alireza Naghibi, Fatemeh Dehghan Nayeri, Rouhollah Azimirad, Mahdi Davoudi Darareh, Sajad Poursajadi

Published Mar 2, 2026• 0 citations
Publisher

Abstract

Rydberg atom-based sensors represent a cutting-edge technology for highly sensitive radio-frequency (RF) electric field detection. Their performance is strongly influenced by the atomic vapor cell's characteristics, which significantly affect the internal field distribution and consequently the sensor's sensitivity. This research examines how relative permittivity, wall thickness, and cell dimensions impact the electric field distribution. Motivated by the growing demand for broadband communication and high-frequency technologies in next-generation systems, the 1-30 GHz frequency range is selected as the operational bandwidth. Results reveal that the resonance frequency of the dielectric cell—determined by its dimensions, relative permittivity, and wall thickness—plays a crucial role in the internal field distribution, making the conventional cell-dimension-to-wavelength ratio alone insufficient for predicting field behavior. Beyond the resonance frequency, field distortion and non-uniformity decrease even as the cell-dimension- to-wavelength ratio increases. Contrary to expectations, reducing cell size does not uniformly diminish field distortion and can significantly enhance the internal field within specific frequency bands. While variations in relative permittivity and wall thickness have a limited effect on the internal field at lower frequencies, these parameters exert a substantial influence near resonance and can even lead to field enhancement, particularly at the cell center. These findings demonstrate that through optimized cell design, the internal field can be engineered to achieve either uniform distributions for high-accuracy metrology or enhanced fields for weak-signal detection. This study provides practical guidelines for developing next-generation quantum RF sensors, communication systems, and radar technologies.

DOI
10.1109/jsen.2026.3667363

Related papers

Vapor cell characterization and optimization for applications in Rydberg atom-based radio frequency sensing

Mohammad Noaman, Hadi Amarloo, Rajesh Pandiyan +6 more

We measure radio frequency electromagnetic wave total scattering cross-sections and internal radio frequency electromagnetic field distributions for several novel types of MEMs atomic vapor cells, optimized for Rydberg atom-based radio frequency electric field sensing. Vapor cells that use metamaterial structures are described. The vapor cells are designed for high radio frequency transmission, uniform internal radio frequency field amplitudes, and low radar scattering cross-section. Experimental scattering data and radio frequency field amplitude maps from functioning vapor cells are presented. The total scattering cross-sections are calibrated to the total scattering cross-sections for a series of steel balls, whose scattering is quantified using Mie scattering theory. We measure across a span of radio frequencies ranging from ~1 GHz – 20 GHz. The work is important for engineering Rydberg atom-based radio frequency electric field sensors for deployment in applications such as test and measurement.

Optical and Quantum Sensing and Precision Metrology II•Mar 8, 2023•10 citations

Field Distortion and Optimization of a Vapor Cell in Rydberg Atom-Based Radio-Frequency Electric Field Measurement

Zhenfei Song, Wanfeng Zhang, Qi Wu +4 more

Highly excited Rydberg atoms in a room-temperature vapor cell are promising for developing a radio-frequency (RF) electric field (E-field) sensor and relevant measurement standards with high accuracy and sensitivity. The all-optical sensing approach is based on electromagnetically-induced transparency and Autler-Townes splitting induced by the RF E-field. Systematic investigation of measurement uncertainty is of great importance for developing a national measurement standard. The presence of a dielectric vapor cell containing alkali atoms changes the magnitude, polarization, and spatial distribution of the incident RF field. In this paper, the field distortion of rubidium vapor cells is investigated, in terms of both field strength distortion and depolarization. Full-wave numerical simulation and analysis are employed to determine general optimization solutions for minimizing such distortion and validated by measuring the E-field vector distribution inside different vapor cells. This work can improve the accuracy of atom-based RF E-field measurements and contributes to the development of related RF quantum sensors.

Sensors•Sep 22, 2018•27 citations

Advancing Rydberg atom-based RF sensors: integrated dielectric amplifiers in MEMS atomic vapor cells

Somayeh M. A. Mirzaee, Su‐Peng Yu, Sanyasi Rao Bobbara +5 more

Engineered, metamaterial vapor cells are useful for high-sensitivity Rydberg atom-based radio frequency (RF) sensors. We present recent advancements on a photonic crystal receiver (PCR) fabricated using MEMS technology for sensitive RF field detection. Beyond the established operational principles leveraging electromagnetically induced transparency (EIT) within alkali atom ensembles, we describe critical factors impacting the performance of the PCR, namely the generation of electric fields arising from Cesium atom interactions with the vapor cell materials. Through X-ray Photoelectron Spectroscopy (XPS) analysis of the glass and silicon components, we determine the amount of Cesium that is adsorbed to the glass and silicon surfaces. The insights into surface adsorption and its control are crucial for improving the stability and practical applicability of PCR-based RF sensors, as well as other types of MEMS vapor cells.

Photonics for Quantum (PfQ)•Jul 18, 2025•0 citations

Photonic cavity architectures for enhanced Rydberg atom-based electrometry: numerical study

Dhriti Maurya, Alexandra B. Artusio‐Glimpse, Adil Meraki +2 more

We present a numerical investigation of microfabricated all-glass vapor cell architectures compatible with wafer-level fabrication, in which guided-mode coupling is used to enhance radio-frequency (RF) electric fields for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant “open” cells and periodically structured “supported” cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. While previous efforts to improve sensor sensitivity have largely relied on external metamaterial lenses or bulky horn antennas, our findings demonstrate that pronounced RF field enhancement can arise intrinsically from the glass vapor-cell geometry itself. By establishing vapor-cell engineering as a predictive route for sensitivity enhancement, we show that these engineered grating resonances naturally occur at frequencies aligned with standard Rubidium and Cesium Rydberg transitions (e.g., n ≈ 40 for 65 to 70 GHz and n ≈ 30 for 100 to 115 GHz). This provides the quantum sensing community with a readily accessible approach to boost field sensitivities and engineer incident-angle selectivity directly into chip-scale electrometers.

Optics Express•Oct 26, 2026•0 citations

Optimizing Vapor Cells for Rydberg Atom-Based Electrometer Applications

Dhriti Maurya, Alexandra B. Artusio‐Glimpse, Adil Meraki +2 more

We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.

arXiv:2509.07823•Sep 9, 2025•2 citations

A photonic crystal receiver for Rydberg atom-based sensing

Hadi Amarloo, Mohammad Noaman, Su‐Peng Yu +5 more

Rydberg atom-based sensors use atoms dressed by lasers to detect and measure radio frequency electromagnetic fields. The absorptive properties of the atomic gas, configured as a Rydberg atom-based sensor, change in the presence of a radio frequency electromagnetic field. While these sensors are reasonably sensitive, the best conventional radio frequency sensors still outperform Rydberg atom-based sensors with respect to sensitivity. One approach to increase the sensitivity of Rydberg atom-based sensors is to engineer the vapor cell that contains the atomic gas. In this work, we introduce a passive, all-dielectric amplifier integrated into a Rydberg atom-based sensor vapor cell. The vapor cell is a combination of a slot waveguide and a photonic crystal. The structural features of the vapor cell yield a power amplification of ~24 dB. The radio frequency electromagnetic field is coupled adiabatically into the slot waveguide and slowed to increase the interaction between the radio frequency field and the atoms to effectively amplify the incoming signal, i.e., increase the Rabi frequency on the radio frequency transition. The work shows the utility of vapor cell engineering for atom-based quantum technologies and paves the way for other such devices. Hadi Amarloo and colleagues present a Rydberg atom receiver based on an integrated photonic crystal vapor cell. The structural features of the design yield a power amplification of 24 dB, providing a pathway to develop Rydberg atom receivers that can be more sensitive than conventional systems.

arXiv:2410.19994•Communications Engineering•Apr 9, 2025•9 citations
Rydberg atom-based sensors represent a cutting-edge technology for highly sensitive radio-frequency (RF) electric field detection. Their performance is strongly influenced by the atomic vapor cell's characteristics, which significantly affect the internal field distribution and consequently the sensor's sensitivity. This research examines how relative permittivity, wall thickness, and cell dimensions impact the electric field distribution. Motivated by the growing demand for broadband communication and high-frequency technologies in next-generation systems, the 1-30 GHz frequency range is selected as the operational bandwidth. Results reveal that the resonance frequency of the dielectric cell—determined by its dimensions, relative permittivity, and wall thickness—plays a crucial role in the internal field distribution, making the conventional cell-dimension-to-wavelength ratio alone insufficient for predicting field behavior. Beyond the resonance frequency, field distortion and non-uniformity decrease even as the cell-dimension- to-wavelength ratio increases. Contrary to expectations, reducing cell size does not uniformly diminish field distortion and can significantly enhance the internal field within specific frequency bands. While variations in relative permittivity and wall thickness have a limited effect on the internal field at lower frequencies, these parameters exert a substantial influence near resonance and can even lead to field enhancement, particularly at the cell center. These findings demonstrate that through optimized cell design, the internal field can be engineered to achieve either uniform distributions for high-accuracy metrology or enhanced fields for weak-signal detection. This study provides practical guidelines for developing next-generation quantum RF sensors, communication systems, and radar technologies.
We measure radio frequency electromagnetic wave total scattering cross-sections and internal radio frequency electromagnetic field distributions for several novel types of MEMs atomic vapor cells, optimized for Rydberg atom-based radio frequency electric field sensing. Vapor cells that use metamaterial structures are described. The vapor cells are designed for high radio frequency transmission, uniform internal radio frequency field amplitudes, and low radar scattering cross-section. Experimental scattering data and radio frequency field amplitude maps from functioning vapor cells are presented. The total scattering cross-sections are calibrated to the total scattering cross-sections for a series of steel balls, whose scattering is quantified using Mie scattering theory. We measure across a span of radio frequencies ranging from ~1 GHz – 20 GHz. The work is important for engineering Rydberg atom-based radio frequency electric field sensors for deployment in applications such as test and measurement.
Highly excited Rydberg atoms in a room-temperature vapor cell are promising for developing a radio-frequency (RF) electric field (E-field) sensor and relevant measurement standards with high accuracy and sensitivity. The all-optical sensing approach is based on electromagnetically-induced transparency and Autler-Townes splitting induced by the RF E-field. Systematic investigation of measurement uncertainty is of great importance for developing a national measurement standard. The presence of a dielectric vapor cell containing alkali atoms changes the magnitude, polarization, and spatial distribution of the incident RF field. In this paper, the field distortion of rubidium vapor cells is investigated, in terms of both field strength distortion and depolarization. Full-wave numerical simulation and analysis are employed to determine general optimization solutions for minimizing such distortion and validated by measuring the E-field vector distribution inside different vapor cells. This work can improve the accuracy of atom-based RF E-field measurements and contributes to the development of related RF quantum sensors.
Engineered, metamaterial vapor cells are useful for high-sensitivity Rydberg atom-based radio frequency (RF) sensors. We present recent advancements on a photonic crystal receiver (PCR) fabricated using MEMS technology for sensitive RF field detection. Beyond the established operational principles leveraging electromagnetically induced transparency (EIT) within alkali atom ensembles, we describe critical factors impacting the performance of the PCR, namely the generation of electric fields arising from Cesium atom interactions with the vapor cell materials. Through X-ray Photoelectron Spectroscopy (XPS) analysis of the glass and silicon components, we determine the amount of Cesium that is adsorbed to the glass and silicon surfaces. The insights into surface adsorption and its control are crucial for improving the stability and practical applicability of PCR-based RF sensors, as well as other types of MEMS vapor cells.
We present a numerical investigation of microfabricated all-glass vapor cell architectures compatible with wafer-level fabrication, in which guided-mode coupling is used to enhance radio-frequency (RF) electric fields for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant “open” cells and periodically structured “supported” cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. While previous efforts to improve sensor sensitivity have largely relied on external metamaterial lenses or bulky horn antennas, our findings demonstrate that pronounced RF field enhancement can arise intrinsically from the glass vapor-cell geometry itself. By establishing vapor-cell engineering as a predictive route for sensitivity enhancement, we show that these engineered grating resonances naturally occur at frequencies aligned with standard Rubidium and Cesium Rydberg transitions (e.g., n ≈ 40 for 65 to 70 GHz and n ≈ 30 for 100 to 115 GHz). This provides the quantum sensing community with a readily accessible approach to boost field sensitivities and engineer incident-angle selectivity directly into chip-scale electrometers.
We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.
Rydberg atom-based sensors use atoms dressed by lasers to detect and measure radio frequency electromagnetic fields. The absorptive properties of the atomic gas, configured as a Rydberg atom-based sensor, change in the presence of a radio frequency electromagnetic field. While these sensors are reasonably sensitive, the best conventional radio frequency sensors still outperform Rydberg atom-based sensors with respect to sensitivity. One approach to increase the sensitivity of Rydberg atom-based sensors is to engineer the vapor cell that contains the atomic gas. In this work, we introduce a passive, all-dielectric amplifier integrated into a Rydberg atom-based sensor vapor cell. The vapor cell is a combination of a slot waveguide and a photonic crystal. The structural features of the vapor cell yield a power amplification of ~24 dB. The radio frequency electromagnetic field is coupled adiabatically into the slot waveguide and slowed to increase the interaction between the radio frequency field and the atoms to effectively amplify the incoming signal, i.e., increase the Rabi frequency on the radio frequency transition. The work shows the utility of vapor cell engineering for atom-based quantum technologies and paves the way for other such devices. Hadi Amarloo and colleagues present a Rydberg atom receiver based on an integrated photonic crystal vapor cell. The structural features of the design yield a power amplification of 24 dB, providing a pathway to develop Rydberg atom receivers that can be more sensitive than conventional systems.