We present a numerical investigation of microfabricated all-glass vapor cell architectures compatible with wafer-level fabrication, in which guided-mode coupling is used to enhance radio-frequency (RF) electric fields for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant “open” cells and periodically structured “supported” cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. While previous efforts to improve sensor sensitivity have largely relied on external metamaterial lenses or bulky horn antennas, our findings demonstrate that pronounced RF field enhancement can arise intrinsically from the glass vapor-cell geometry itself. By establishing vapor-cell engineering as a predictive route for sensitivity enhancement, we show that these engineered grating resonances naturally occur at frequencies aligned with standard Rubidium and Cesium Rydberg transitions (e.g., n ≈ 40 for 65 to 70 GHz and n ≈ 30 for 100 to 115 GHz). This provides the quantum sensing community with a readily accessible approach to boost field sensitivities and engineer incident-angle selectivity directly into chip-scale electrometers.
We present a numerical investigation of microfabricated all-glass vapor cell architectures compatible with wafer-level fabrication, in which guided-mode coupling is used to enhance radio-frequency (RF) electric fields for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant “open” cells and periodically structured “supported” cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. While previous efforts to improve sensor sensitivity have largely relied on external metamaterial lenses or bulky horn antennas, our findings demonstrate that pronounced RF field enhancement can arise intrinsically from the glass vapor-cell geometry itself. By establishing vapor-cell engineering as a predictive route for sensitivity enhancement, we show that these engineered grating resonances naturally occur at frequencies aligned with standard Rubidium and Cesium Rydberg transitions (e.g., n ≈ 40 for 65 to 70 GHz and n ≈ 30 for 100 to 115 GHz). This provides the quantum sensing community with a readily accessible approach to boost field sensitivities and engineer incident-angle selectivity directly into chip-scale electrometers.
We present a comprehensive numerical investigation into the radio frequency (RF) field behavior within miniaturized all-glass and hybrid vapor cell geometries designed for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant "open" cells and periodically structured "supported" cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle- and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. Our findings open new possibilities for optimizing vapor cell architectures to enhance field sensitivity, directional and polarization selectivity, and integration potential in chip-scale quantum sensing platforms based on Rydberg atoms.
Abstract Millimeter-scale atomic vapor cells can be accurately and economically batch-fabricated by anodically bonding silicon and glass wafers, enabling the manufacturing of miniature atomic clocks and quantum sensors. However, silicon’s high dielectric constant and conductive losses at millimeter wave frequencies limit its suitability for Rydberg-atom electrometry, which enables highly sensitive electric-field measurements by exploiting the extreme polarizability of Rydberg states in alkali atoms. To address this, we present an all-glass wafer-level microfabrication process that eliminates silicon, creating hermetically sealed vapor cells that are stable over long timelines with embedded cesium dispensers. Femtosecond laser machining precisely defines the cell geometry, and laser-activated alkali loading ensures reliable filling. We demonstrate long-term vacuum stability and robust Rydberg excitation through electromagnetically induced transparency measurements. We then use these cells to measure a 34 GHz millimeter wave field resonant with the 58D5/2→60P3/2 58 D 5 / 2 → 60 P 3 / 2 transition using Autler-Townes splitting and observe the expected linear dependence with field strength. This work demonstrates that the all-glass bonding approach offers a highly durable low-loss cell alternative for miniaturized millimeter wave and microwave quantum sensing, with the potential to flexibly incorporate a range of other dielectric and semiconductor materials and integrate with photonic and electronic technologies.
Engineered, metamaterial vapor cells are useful for high-sensitivity Rydberg atom-based radio frequency (RF) sensors. We present recent advancements on a photonic crystal receiver (PCR) fabricated using MEMS technology for sensitive RF field detection. Beyond the established operational principles leveraging electromagnetically induced transparency (EIT) within alkali atom ensembles, we describe critical factors impacting the performance of the PCR, namely the generation of electric fields arising from Cesium atom interactions with the vapor cell materials. Through X-ray Photoelectron Spectroscopy (XPS) analysis of the glass and silicon components, we determine the amount of Cesium that is adsorbed to the glass and silicon surfaces. The insights into surface adsorption and its control are crucial for improving the stability and practical applicability of PCR-based RF sensors, as well as other types of MEMS vapor cells.
Abstract Micromachined vapor cells have revolutionized chip-scale quantum sensors, including magnetometers and atomic clocks. In parallel, Rydberg-atom quantum sensing has emerged as a powerful platform for broadband, non-invasive and ultra-sensitive electrometry, enabling compact atom-based antenna elements for electromagnetic reception, often referred to as quantum antennas. Yet, to date, Rydberg sensing has largely been limited to glass-blown, cm-scale vapor cells. Here, we perform Rydberg spectroscopy and electrometry using a wafer-scale-fabricated Pyrex–Si–Pyrex cell with millimeter-scale dimensions. The Rydberg spectroscopic line is characterized with respect to critical parameters such as temperature, the frequency and amplitude of the applied radio frequency (RF) field, light intensity, and the spatial position of the interrogating beam. Our study reveals lineshapes directly influenced by a complex landscape of electrostatic fields with values up to approximately 0.6 V cm − 1 . By controlling key parameters, we were able to reduce the effect of these internal electric fields, and demonstrate the detection of RF fields assessed using the Autler–Townes splitting with a minimum detectable field of 20 μ V cm − 1 . Our results highlight the potential of micromachined vapor cells for subwavelength electromagnetic field measurements, with applications in communications, near-field RF imaging, and chip-scale quantum technologies.
Rydberg-atom electrometry, as an emerging cutting-edge technology, features high sensitivity, broad bandwidth, calibration-free operation, and beyond. However, until now the key atomic vapor cells used for confining electric field-sensitive Rydberg atoms nearly made with traditional glass-blown techniques, hindering the miniaturization, integration, and batch manufacturing. Here, we present the wafer-level MEMS atomic vapor cells with glass-silicon-glass sandwiched structure that are batch-manufactured for both frequency stability and electric field measurement. We use specially customized ultra-thick silicon wafers with a resistivity exceeding 10,000 Ω cm, three orders of magnitude higher than that of typical silicon, and a thickness of 6 mm, providing a 4-fold improvement in optical interrogation length. With the as-developed MEMS atomic vapor cell, we configured a high-sensitivity Rydberg-atom electrometry with the minimal detectable microwave field to be 2.8 mV/cm. This combination of miniaturization and sensitivity represents a significant advance in the state-of-the-art field of Rydberg-atom electrometry, paving the way for chip-scale Rydberg-atom electrometry and potentially opening up new applications in a wider variety of fields.
Highly excited Rydberg atoms in a room-temperature vapor cell are promising for developing a radio-frequency (RF) electric field (E-field) sensor and relevant measurement standards with high accuracy and sensitivity. The all-optical sensing approach is based on electromagnetically-induced transparency and Autler-Townes splitting induced by the RF E-field. Systematic investigation of measurement uncertainty is of great importance for developing a national measurement standard. The presence of a dielectric vapor cell containing alkali atoms changes the magnitude, polarization, and spatial distribution of the incident RF field. In this paper, the field distortion of rubidium vapor cells is investigated, in terms of both field strength distortion and depolarization. Full-wave numerical simulation and analysis are employed to determine general optimization solutions for minimizing such distortion and validated by measuring the E-field vector distribution inside different vapor cells. This work can improve the accuracy of atom-based RF E-field measurements and contributes to the development of related RF quantum sensors.