Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2410.19994 · Communications Engineering

A photonic crystal receiver for Rydberg atom-based sensing

Hadi Amarloo, Mohammad Noaman, Su‐Peng Yu, Donald W. Booth, Somayeh M. A. Mirzaee, Rajesh Pandiyan, Florian Christaller, James P. Shaffer

Published Apr 9, 2025• 9 citations
arXivHTMLPDF

Abstract

Rydberg atom-based sensors use atoms dressed by lasers to detect and measure radio frequency electromagnetic fields. The absorptive properties of the atomic gas, configured as a Rydberg atom-based sensor, change in the presence of a radio frequency electromagnetic field. While these sensors are reasonably sensitive, the best conventional radio frequency sensors still outperform Rydberg atom-based sensors with respect to sensitivity. One approach to increase the sensitivity of Rydberg atom-based sensors is to engineer the vapor cell that contains the atomic gas. In this work, we introduce a passive, all-dielectric amplifier integrated into a Rydberg atom-based sensor vapor cell. The vapor cell is a combination of a slot waveguide and a photonic crystal. The structural features of the vapor cell yield a power amplification of ~24 dB. The radio frequency electromagnetic field is coupled adiabatically into the slot waveguide and slowed to increase the interaction between the radio frequency field and the atoms to effectively amplify the incoming signal, i.e., increase the Rabi frequency on the radio frequency transition. The work shows the utility of vapor cell engineering for atom-based quantum technologies and paves the way for other such devices. Hadi Amarloo and colleagues present a Rydberg atom receiver based on an integrated photonic crystal vapor cell. The structural features of the design yield a power amplification of 24 dB, providing a pathway to develop Rydberg atom receivers that can be more sensitive than conventional systems.

DOI
10.1038/s44172-025-00408-3

Related papers

Advancing Rydberg atom-based RF sensors: integrated dielectric amplifiers in MEMS atomic vapor cells

Somayeh M. A. Mirzaee, Su‐Peng Yu, Sanyasi Rao Bobbara +5 more

Engineered, metamaterial vapor cells are useful for high-sensitivity Rydberg atom-based radio frequency (RF) sensors. We present recent advancements on a photonic crystal receiver (PCR) fabricated using MEMS technology for sensitive RF field detection. Beyond the established operational principles leveraging electromagnetically induced transparency (EIT) within alkali atom ensembles, we describe critical factors impacting the performance of the PCR, namely the generation of electric fields arising from Cesium atom interactions with the vapor cell materials. Through X-ray Photoelectron Spectroscopy (XPS) analysis of the glass and silicon components, we determine the amount of Cesium that is adsorbed to the glass and silicon surfaces. The insights into surface adsorption and its control are crucial for improving the stability and practical applicability of PCR-based RF sensors, as well as other types of MEMS vapor cells.

Photonics for Quantum (PfQ)•Jul 18, 2025•0 citations

Coherent Rydberg-atom engineering for radio-frequency sensing

Matthias Schmidt

In this work, theoretical and experimental works on Rydberg-atom based radio-frequency (RF) sensors are presented. The results were obtained in close collaboration with the Quantum Valley Ideas Lab, whose goal is the miniaturization and prototyping of these sensors. The Rydberg-atom based RF sensors utilize lasers to coherently excite an atomic vapor in a vapor cell at room temperature to a highly excited Rydberg state, which is extremely sensitive to external environmental influences. In this work, Rydberg-atom based RF sensing is described as coherent multi-photon interference in the atom-light coupled system by introducing atom-light coherences. The presence of the RF wave influences the absorption of a probe laser propagating through the atomic medium. The atomic response of the Rydberg-atoms can be engineered by changing the atom-light coherences through laser power and frequency. Analytic expressions for the atomic response to the incident RF wave are derived in the weak probe limit and provide a deeper understanding of the underlying coherent multi-photon interference processes, which help to further tailor the Rydberg-atom for the purpose of the application. Good agreement with full numerical simulations of the Lindblad-master equation is found. An analysis of the various Doppler limits strongly motivates an excitation scheme where the effective wave vector mismatch on the Rydberg transition vanishes, as a promising candidate to achieve narrower spectral linewidths and, consequently, a higher sensitivity. The level structure of cesium presents a unique three-photon excitation scheme where residual Doppler shifts become comparable to the spectral linewidth of the coupling lasers. The experimental realization of this excitation scheme is demonstrated. A spectral linewidth of the Rydberg transition of 190 kHz is achieved. The measurements present the world record sensitivity, 45 nV/cm/Hz^1/2, for all-optical RF sensing with room temperature operation. These results make the three-photon excitation scheme a prime candidate for the next generation of Rydberg-atom based RF sensor prototypes. Finally, all-optical phase-sensitive RF detection is theoretically investigated in a closed-loop excitation scheme. An analytic expression is derived that intuitively describes the atomic response. Furthermore, it provides insights into the probe intensity dynamics that occur when the system is operated under finite detuning. These oscillatory dynamics allow for the extraction of the in- (I) and out- (Q) of-phase response to the RF wave, thereby enabling the simultaneous detection of the RF E-field amplitude and phase. A blueprint for the experimental realization is presented, and angle-of-arrival tolerances for the RF wave are estimated. A quadrature amplitude modulation (QAM) sequence was modelled and the simultaneous extraction of the phase and amplitude of the RF wave of interest was successfully demonstrated.

•Jan 1, 2025•0 citations

Electromagnetic Analysis and Resonance-Based Optimization of Atomic Vapor Cells for Enhanced Accuracy and Sensitivity in Rydberg RF Sensors

Alireza Naghibi, Fatemeh Dehghan Nayeri, Rouhollah Azimirad +2 more

Rydberg atom-based sensors represent a cutting-edge technology for highly sensitive radio-frequency (RF) electric field detection. Their performance is strongly influenced by the atomic vapor cell's characteristics, which significantly affect the internal field distribution and consequently the sensor's sensitivity. This research examines how relative permittivity, wall thickness, and cell dimensions impact the electric field distribution. Motivated by the growing demand for broadband communication and high-frequency technologies in next-generation systems, the 1-30 GHz frequency range is selected as the operational bandwidth. Results reveal that the resonance frequency of the dielectric cell—determined by its dimensions, relative permittivity, and wall thickness—plays a crucial role in the internal field distribution, making the conventional cell-dimension-to-wavelength ratio alone insufficient for predicting field behavior. Beyond the resonance frequency, field distortion and non-uniformity decrease even as the cell-dimension- to-wavelength ratio increases. Contrary to expectations, reducing cell size does not uniformly diminish field distortion and can significantly enhance the internal field within specific frequency bands. While variations in relative permittivity and wall thickness have a limited effect on the internal field at lower frequencies, these parameters exert a substantial influence near resonance and can even lead to field enhancement, particularly at the cell center. These findings demonstrate that through optimized cell design, the internal field can be engineered to achieve either uniform distributions for high-accuracy metrology or enhanced fields for weak-signal detection. This study provides practical guidelines for developing next-generation quantum RF sensors, communication systems, and radar technologies.

IEEE Sensors Journal•Mar 2, 2026•0 citations

Photonic cavity architectures for enhanced Rydberg atom-based electrometry: numerical study

Dhriti Maurya, Alexandra B. Artusio‐Glimpse, Adil Meraki +2 more

We present a numerical investigation of microfabricated all-glass vapor cell architectures compatible with wafer-level fabrication, in which guided-mode coupling is used to enhance radio-frequency (RF) electric fields for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant “open” cells and periodically structured “supported” cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. While previous efforts to improve sensor sensitivity have largely relied on external metamaterial lenses or bulky horn antennas, our findings demonstrate that pronounced RF field enhancement can arise intrinsically from the glass vapor-cell geometry itself. By establishing vapor-cell engineering as a predictive route for sensitivity enhancement, we show that these engineered grating resonances naturally occur at frequencies aligned with standard Rubidium and Cesium Rydberg transitions (e.g., n ≈ 40 for 65 to 70 GHz and n ≈ 30 for 100 to 115 GHz). This provides the quantum sensing community with a readily accessible approach to boost field sensitivities and engineer incident-angle selectivity directly into chip-scale electrometers.

Optics Express•Oct 26, 2026•0 citations

Rydberg Atom RF Sensing: State of the Art, Principles, Metrics, and Roadmaps

Anu Babusenan, Fr´ed´eric Munoz, Jean-Baptiste Qu´elene +1 more

Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.

IEEE Sensors Reviews•Jan 1, 2026•1 citation

Probing bandwidth and sensitivity in Rydberg atom sensing via optical homodyne and rf heterodyne detection

Dixith Manchaiah, Stone Oliver, Samuel Berweger +2 more

Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.

arXiv:2509.20632•Physical Review A•Dec 22, 2025•8 citations
Rydberg atom-based sensors use atoms dressed by lasers to detect and measure radio frequency electromagnetic fields. The absorptive properties of the atomic gas, configured as a Rydberg atom-based sensor, change in the presence of a radio frequency electromagnetic field. While these sensors are reasonably sensitive, the best conventional radio frequency sensors still outperform Rydberg atom-based sensors with respect to sensitivity. One approach to increase the sensitivity of Rydberg atom-based sensors is to engineer the vapor cell that contains the atomic gas. In this work, we introduce a passive, all-dielectric amplifier integrated into a Rydberg atom-based sensor vapor cell. The vapor cell is a combination of a slot waveguide and a photonic crystal. The structural features of the vapor cell yield a power amplification of ~24 dB. The radio frequency electromagnetic field is coupled adiabatically into the slot waveguide and slowed to increase the interaction between the radio frequency field and the atoms to effectively amplify the incoming signal, i.e., increase the Rabi frequency on the radio frequency transition. The work shows the utility of vapor cell engineering for atom-based quantum technologies and paves the way for other such devices. Hadi Amarloo and colleagues present a Rydberg atom receiver based on an integrated photonic crystal vapor cell. The structural features of the design yield a power amplification of 24 dB, providing a pathway to develop Rydberg atom receivers that can be more sensitive than conventional systems.
Engineered, metamaterial vapor cells are useful for high-sensitivity Rydberg atom-based radio frequency (RF) sensors. We present recent advancements on a photonic crystal receiver (PCR) fabricated using MEMS technology for sensitive RF field detection. Beyond the established operational principles leveraging electromagnetically induced transparency (EIT) within alkali atom ensembles, we describe critical factors impacting the performance of the PCR, namely the generation of electric fields arising from Cesium atom interactions with the vapor cell materials. Through X-ray Photoelectron Spectroscopy (XPS) analysis of the glass and silicon components, we determine the amount of Cesium that is adsorbed to the glass and silicon surfaces. The insights into surface adsorption and its control are crucial for improving the stability and practical applicability of PCR-based RF sensors, as well as other types of MEMS vapor cells.
In this work, theoretical and experimental works on Rydberg-atom based radio-frequency (RF) sensors are presented. The results were obtained in close collaboration with the Quantum Valley Ideas Lab, whose goal is the miniaturization and prototyping of these sensors. The Rydberg-atom based RF sensors utilize lasers to coherently excite an atomic vapor in a vapor cell at room temperature to a highly excited Rydberg state, which is extremely sensitive to external environmental influences. In this work, Rydberg-atom based RF sensing is described as coherent multi-photon interference in the atom-light coupled system by introducing atom-light coherences. The presence of the RF wave influences the absorption of a probe laser propagating through the atomic medium. The atomic response of the Rydberg-atoms can be engineered by changing the atom-light coherences through laser power and frequency. Analytic expressions for the atomic response to the incident RF wave are derived in the weak probe limit and provide a deeper understanding of the underlying coherent multi-photon interference processes, which help to further tailor the Rydberg-atom for the purpose of the application. Good agreement with full numerical simulations of the Lindblad-master equation is found. An analysis of the various Doppler limits strongly motivates an excitation scheme where the effective wave vector mismatch on the Rydberg transition vanishes, as a promising candidate to achieve narrower spectral linewidths and, consequently, a higher sensitivity. The level structure of cesium presents a unique three-photon excitation scheme where residual Doppler shifts become comparable to the spectral linewidth of the coupling lasers. The experimental realization of this excitation scheme is demonstrated. A spectral linewidth of the Rydberg transition of 190 kHz is achieved. The measurements present the world record sensitivity, 45 nV/cm/Hz^1/2, for all-optical RF sensing with room temperature operation. These results make the three-photon excitation scheme a prime candidate for the next generation of Rydberg-atom based RF sensor prototypes. Finally, all-optical phase-sensitive RF detection is theoretically investigated in a closed-loop excitation scheme. An analytic expression is derived that intuitively describes the atomic response. Furthermore, it provides insights into the probe intensity dynamics that occur when the system is operated under finite detuning. These oscillatory dynamics allow for the extraction of the in- (I) and out- (Q) of-phase response to the RF wave, thereby enabling the simultaneous detection of the RF E-field amplitude and phase. A blueprint for the experimental realization is presented, and angle-of-arrival tolerances for the RF wave are estimated. A quadrature amplitude modulation (QAM) sequence was modelled and the simultaneous extraction of the phase and amplitude of the RF wave of interest was successfully demonstrated.
Rydberg atom-based sensors represent a cutting-edge technology for highly sensitive radio-frequency (RF) electric field detection. Their performance is strongly influenced by the atomic vapor cell's characteristics, which significantly affect the internal field distribution and consequently the sensor's sensitivity. This research examines how relative permittivity, wall thickness, and cell dimensions impact the electric field distribution. Motivated by the growing demand for broadband communication and high-frequency technologies in next-generation systems, the 1-30 GHz frequency range is selected as the operational bandwidth. Results reveal that the resonance frequency of the dielectric cell—determined by its dimensions, relative permittivity, and wall thickness—plays a crucial role in the internal field distribution, making the conventional cell-dimension-to-wavelength ratio alone insufficient for predicting field behavior. Beyond the resonance frequency, field distortion and non-uniformity decrease even as the cell-dimension- to-wavelength ratio increases. Contrary to expectations, reducing cell size does not uniformly diminish field distortion and can significantly enhance the internal field within specific frequency bands. While variations in relative permittivity and wall thickness have a limited effect on the internal field at lower frequencies, these parameters exert a substantial influence near resonance and can even lead to field enhancement, particularly at the cell center. These findings demonstrate that through optimized cell design, the internal field can be engineered to achieve either uniform distributions for high-accuracy metrology or enhanced fields for weak-signal detection. This study provides practical guidelines for developing next-generation quantum RF sensors, communication systems, and radar technologies.
We present a numerical investigation of microfabricated all-glass vapor cell architectures compatible with wafer-level fabrication, in which guided-mode coupling is used to enhance radio-frequency (RF) electric fields for Rydberg atom-based electrometry. Using full-vector finite element modeling (FEM), we analyze electromagnetic field enhancement across a wide frequency range (0.05 GHz to 150 GHz) as a function of polarization, incidence angle, and structural configuration. Two primary vapor cell designs are evaluated: translationally invariant “open” cells and periodically structured “supported” cells composed entirely of low-loss glass, as well as hybrid structures incorporating highly doped silicon. Our simulations reveal that the structured all-glass vapor cells exhibit sharp, angle and polarization-dependent resonant peaks due to guided-mode coupling, resulting in localized RF power enhancements exceeding 8x. In contrast, silicon-based structures demonstrate significant electric field attenuation and suppression of resonant features due to their high dielectric losses. Through k-vector and angle-resolved analyses, we show how cell geometry and material properties critically influence the RF field distribution and coupling efficiency. While previous efforts to improve sensor sensitivity have largely relied on external metamaterial lenses or bulky horn antennas, our findings demonstrate that pronounced RF field enhancement can arise intrinsically from the glass vapor-cell geometry itself. By establishing vapor-cell engineering as a predictive route for sensitivity enhancement, we show that these engineered grating resonances naturally occur at frequencies aligned with standard Rubidium and Cesium Rydberg transitions (e.g., n ≈ 40 for 65 to 70 GHz and n ≈ 30 for 100 to 115 GHz). This provides the quantum sensing community with a readily accessible approach to boost field sensitivities and engineer incident-angle selectivity directly into chip-scale electrometers.
Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.
Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.