Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

VLSI complexity single flux quantum systems

Jabbari, Tahereh, Friedman, Eby G.

Published Jan 1, 2023• 0 citations
OpenAlex

Abstract

Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.

Related papers

Transmission Lines in VLSI Complexity Single Flux Quantum Systems

Tahereh Jabbari, Eby G. Friedman

Superconductive electronics based on Josephson junctions (JJ) is a promising cryogenic alternative technology to complementary metal oxide semiconductor (CMOS) technology for ultra-low energy, high speed stationary applications. For complex superconductive systems, the automated routing process determines the topology and methodology to connect cells while satisfying design constraints. On-chip signal routing has become an issue of growing importance in modern superconductive technologies; particularly, single flux quantum (SFQ) systems. Specialized routing methods for these systems are required. These routing methods include passive transmission lines (PTLs) and Josephson transmission lines (JTLs) behaving as interconnects. A primary issue within a long SFQ interconnect is the effects of resonance due to the imperfect match between the PTLs and Josephson junctions. A repeater insertion methodology to reduce and manage these resonance effects is required for driving long and short interconnect in VLSI complexity SFQ systems. Permissible interconnect lengths are suggested to ensure the reflections do not affect the returning signals. The microwave behavior of the interconnect striplines is also considered to accurately estimate the surface inductance of the lines. A closed-form expression describing the dependence of the surface inductance of a stripline on the line thickness, magnetic field, and current density is discussed. Another primary issue within SFQ circuits is coupling noise between transmission striplines, degrading performance and decreasing margins. Inductive and capacitive coupling noise between the routing layers, for the MIT LL SFQ5ee process, is described. An analysis of inductive and capacitive coupling noise can determine the minimum physical spacing between lines to enhance the automated routing process in large scale systems. The increasing complexity of modern SFQ circuits has also made the issue of flux trapping of growing importance. The use of wide striplines for signal routing has exacerbated this issue. Trapped residual magnetic fields within the striplines damage the operability of superconductive circuits. Area efficient topologies for striplines are introduced to manage flux trapping in large scale SFQ circuits. These topologies are composed of several narrow lines rather than a single wide stripline. The first approach is a narrow parallel line topology in series with small resistors where each narrow line is connected to a single small resistor and via. The resistors in the parallel line topology remove any trapped fluxons and break any loops while requiring additional vias. The second topology is a fingered narrow line topology. The fingered narrow line topology enhances the scalability of SFQ systems while not requiring additional area and vias. These proposed topologies require significantly less area while preventing flux from being trapped within wide superconductive striplines and reducing coupling noise between striplines. These methodologies and techniques are intended as guidelines to enable robust routing with superconductive interconnects. With these and other advances in design methodologies for superconductive electronics, the complexity of SFQ circuits is expected to greatly increase.

Photonics & Electromagnetics Research Symposium (PIERS)•Jul 3, 2023•25 citations

Challenges and the status of superconducting single flux quantum technology

Naveen Kumar Katam, Jamil Kawa, Massoud Pedram

Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.

Design, Automation, and Test in Europe•Mar 1, 2019•11 citations

Vision for single flux quantum very large scale integrated technology

Arnold H. Silver, P. Bunyk, Alan W. Kleinsasser +1 more

Single flux quantum (SFQ) electronics is extremely fast and has very low on-chip power dissipation. SFQ VLSI is an excellent candidate for high-performance computing and other applications requiring extremely high-speed signal processing. Despite this, SFQ technology has generally not been accepted for system implementation. We argue that this is due, at least in part, to the use of outdated tools to produce SFQ circuits and chips. Assuming the use of tools equivalent to those employed in the semiconductor industry, we estimate the density of Josephson junctions, circuit speed, and power dissipation that could be achieved with SFQ technology. Today, CMOS lithography is at 90?65?nm with about 20 layers. Assuming equivalent technology, aggressively increasing the current density above 100?kA?cm?2 to achieve junction speeds approximately 1000?GHz, and reducing device footprints by converting device profiles from planar to vertical, one could expect to integrate about 250?M Josephson junctions cm?2 into SFQ digital circuits. This should enable circuit operation with clock frequencies above 200?GHz and place approximately 20?K gates within a radius of one clock period. As a result, complete microprocessors, including integrated memory registers, could be fabricated on a single chip.

Superconductor Science and Technology•Mar 16, 2006•6 citations

Development of superconductor electronics technology for high-end computing

Arnold H. Silver, Alan W. Kleinsasser, G.L. Kerber +4 more

This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm −2 , 1.25 µm junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s −1 , both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density.

Superconductor Science and Technology•Oct 31, 2003•19 citations

Metastability in Superconducting Single Flux Quantum (SFQ) Logic

Gourav Datta, Yunkun Lin, Bo Zhang +1 more

Superconducting digital electronics, especially Single Flux Quantum (SFQ), has emerged as a promising beyond-CMOS technology with Josephson junctions (JJ) as the active device. It has the potential to meet the booming demands of lower power consumption and higher operation speeds in the electronics industry and future exascale supercomputing systems. Despite these promises, scaling SFQ circuits remains a serious challenge that motivates the support of multiple SFQ clock domains. Towards this end, this paper analyzes the impact of setup time violations and metastability in SFQ circuits comparing the derived analytical models to their CMOS counterparts. It also proposes new techniques to reduce the average latency in metastability-tolerant SFQ synchronizers, and evaluates their effects on the layout and critical margin of the design. It further extends the proposed model to estimate the Mean Time Between Failure (MTBF) of flip-flop-based synchronizers and shows that their MTBF with the current feature sizes is unaffected by noise, similar to CMOS. Finally, it curve fits this model to simulations using the state-of-the-art SFQ5ee process and shows that a two-flop SFQ synchronizer with a clock frequency of 25 GHz has an estimated MTBF of ~106years.

IEEE Transactions on Circuits and Systems I Regular Papers•Feb 15, 2021•6 citations

Unleashing the Power of T1-cells in SFQ Arithmetic Circuits

Rassul Bairamkulov, Mingfei Yu, Giovanni De Micheli

Rapid single-flux quantum (RSFQ) is one of the most advanced cryogenic superconductive electronics technologies. With orders of magnitude smaller power dissipation, RSFQ is an attractive technology for cloud computing, aerospace electronics, and high-speed interfacing with quantum computing systems. Technological challenges however greatly complicate the realization of VLSI-complexity RSFQ systems. For example, gate-level pipelining in SFQ systems incurs a significant area overhead due to the need for path balancing. This issue is particularly detrimental to SFQ systems due to the limited layout density of RSFQ systems.

ACM/IEEE Design Automation Conference (DAC)•Jun 23, 2024•1 citation
Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.
Superconductive electronics based on Josephson junctions (JJ) is a promising cryogenic alternative technology to complementary metal oxide semiconductor (CMOS) technology for ultra-low energy, high speed stationary applications. For complex superconductive systems, the automated routing process determines the topology and methodology to connect cells while satisfying design constraints. On-chip signal routing has become an issue of growing importance in modern superconductive technologies; particularly, single flux quantum (SFQ) systems. Specialized routing methods for these systems are required. These routing methods include passive transmission lines (PTLs) and Josephson transmission lines (JTLs) behaving as interconnects. A primary issue within a long SFQ interconnect is the effects of resonance due to the imperfect match between the PTLs and Josephson junctions. A repeater insertion methodology to reduce and manage these resonance effects is required for driving long and short interconnect in VLSI complexity SFQ systems. Permissible interconnect lengths are suggested to ensure the reflections do not affect the returning signals. The microwave behavior of the interconnect striplines is also considered to accurately estimate the surface inductance of the lines. A closed-form expression describing the dependence of the surface inductance of a stripline on the line thickness, magnetic field, and current density is discussed. Another primary issue within SFQ circuits is coupling noise between transmission striplines, degrading performance and decreasing margins. Inductive and capacitive coupling noise between the routing layers, for the MIT LL SFQ5ee process, is described. An analysis of inductive and capacitive coupling noise can determine the minimum physical spacing between lines to enhance the automated routing process in large scale systems. The increasing complexity of modern SFQ circuits has also made the issue of flux trapping of growing importance. The use of wide striplines for signal routing has exacerbated this issue. Trapped residual magnetic fields within the striplines damage the operability of superconductive circuits. Area efficient topologies for striplines are introduced to manage flux trapping in large scale SFQ circuits. These topologies are composed of several narrow lines rather than a single wide stripline. The first approach is a narrow parallel line topology in series with small resistors where each narrow line is connected to a single small resistor and via. The resistors in the parallel line topology remove any trapped fluxons and break any loops while requiring additional vias. The second topology is a fingered narrow line topology. The fingered narrow line topology enhances the scalability of SFQ systems while not requiring additional area and vias. These proposed topologies require significantly less area while preventing flux from being trapped within wide superconductive striplines and reducing coupling noise between striplines. These methodologies and techniques are intended as guidelines to enable robust routing with superconductive interconnects. With these and other advances in design methodologies for superconductive electronics, the complexity of SFQ circuits is expected to greatly increase.
Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.
Single flux quantum (SFQ) electronics is extremely fast and has very low on-chip power dissipation. SFQ VLSI is an excellent candidate for high-performance computing and other applications requiring extremely high-speed signal processing. Despite this, SFQ technology has generally not been accepted for system implementation. We argue that this is due, at least in part, to the use of outdated tools to produce SFQ circuits and chips. Assuming the use of tools equivalent to those employed in the semiconductor industry, we estimate the density of Josephson junctions, circuit speed, and power dissipation that could be achieved with SFQ technology. Today, CMOS lithography is at 90?65?nm with about 20 layers. Assuming equivalent technology, aggressively increasing the current density above 100?kA?cm?2 to achieve junction speeds approximately 1000?GHz, and reducing device footprints by converting device profiles from planar to vertical, one could expect to integrate about 250?M Josephson junctions cm?2 into SFQ digital circuits. This should enable circuit operation with clock frequencies above 200?GHz and place approximately 20?K gates within a radius of one clock period. As a result, complete microprocessors, including integrated memory registers, could be fabricated on a single chip.
This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm −2 , 1.25 µm junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s −1 , both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density.
Superconducting digital electronics, especially Single Flux Quantum (SFQ), has emerged as a promising beyond-CMOS technology with Josephson junctions (JJ) as the active device. It has the potential to meet the booming demands of lower power consumption and higher operation speeds in the electronics industry and future exascale supercomputing systems. Despite these promises, scaling SFQ circuits remains a serious challenge that motivates the support of multiple SFQ clock domains. Towards this end, this paper analyzes the impact of setup time violations and metastability in SFQ circuits comparing the derived analytical models to their CMOS counterparts. It also proposes new techniques to reduce the average latency in metastability-tolerant SFQ synchronizers, and evaluates their effects on the layout and critical margin of the design. It further extends the proposed model to estimate the Mean Time Between Failure (MTBF) of flip-flop-based synchronizers and shows that their MTBF with the current feature sizes is unaffected by noise, similar to CMOS. Finally, it curve fits this model to simulations using the state-of-the-art SFQ5ee process and shows that a two-flop SFQ synchronizer with a clock frequency of 25 GHz has an estimated MTBF of ~106years.
Rapid single-flux quantum (RSFQ) is one of the most advanced cryogenic superconductive electronics technologies. With orders of magnitude smaller power dissipation, RSFQ is an attractive technology for cloud computing, aerospace electronics, and high-speed interfacing with quantum computing systems. Technological challenges however greatly complicate the realization of VLSI-complexity RSFQ systems. For example, gate-level pipelining in SFQ systems incurs a significant area overhead due to the need for path balancing. This issue is particularly detrimental to SFQ systems due to the limited layout density of RSFQ systems.