Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Circuits and Systems I Regular Papers

Metastability in Superconducting Single Flux Quantum (SFQ) Logic

Gourav Datta, Yunkun Lin, Bo Zhang, Peter A. Beerel

Published Feb 15, 2021• 6 citations
Publisher

Abstract

Superconducting digital electronics, especially Single Flux Quantum (SFQ), has emerged as a promising beyond-CMOS technology with Josephson junctions (JJ) as the active device. It has the potential to meet the booming demands of lower power consumption and higher operation speeds in the electronics industry and future exascale supercomputing systems. Despite these promises, scaling SFQ circuits remains a serious challenge that motivates the support of multiple SFQ clock domains. Towards this end, this paper analyzes the impact of setup time violations and metastability in SFQ circuits comparing the derived analytical models to their CMOS counterparts. It also proposes new techniques to reduce the average latency in metastability-tolerant SFQ synchronizers, and evaluates their effects on the layout and critical margin of the design. It further extends the proposed model to estimate the Mean Time Between Failure (MTBF) of flip-flop-based synchronizers and shows that their MTBF with the current feature sizes is unaffected by noise, similar to CMOS. Finally, it curve fits this model to simulations using the state-of-the-art SFQ5ee process and shows that a two-flop SFQ synchronizer with a clock frequency of 25 GHz has an estimated MTBF of ~106years.

DOI
10.1109/tcsi.2021.3056682

Related papers

Single Flux Quantum (SFQ) First-in-First-Out (FIFO) Synchronizers: New Designs and Paradigms

Gourav Datta, Adesh Singh Sudheer, Pranav Hindupur Srinivas +1 more

Digital single-flux quantum (SFQ) technology promises to meet the demands of ultralow-power and high-speed computing needed for future exascale supercomputing systems. However, high degrees of variability makes ultrahigh-speed low-skew clock distribution of large-scale SFQ circuits challenging. This article proposes to mitigate this problem by supporting multiple independent SFQ clock domains with the design of reliable clock domain crossing (CDC) circuits. We first show that previously proposed CDC first-in-first-out buffers (FIFOs) are vulnerable to synchronization errors, motivating the need for more robust CDC FIFOs. Inspired by complementary metal-oxide-semiconductor (CMOS) multi-flip-flop FIFO synchronizers, we then present a metastability-resilient SFQ FIFO synchronizer that, simulations show, delivers over a 1000 reduction in logical error rate at 30 GHz. We show that, for a 10-stage FIFO, the Josephson junction area of our proposed design is only 7.5% larger than the nonresilient counterpart. Finally, we propose detailed design guidelines that define the minimal depth of our proposed synchronizers subject to both throughput and burstiness constraints.

IEEE Transactions on Applied Superconductivity•May 28, 2020•4 citations

Prospect of single flux quantum logic in superconducting digital electronics

J.H. Kang, John X. Przybysz, Donald L. Miller +2 more

This paper presents a study on the merits of single flux quantum (SFQ) logic in superconducting digital electronics. With no requirements for an external RF clock source, the speed of SFQ logic circuits can exceed 100 GHz, orders of magnitude higher than latching logic circuits. Use of overdamped junctions in SFQ circuits makes this logic available for already developed high-Tc junctions. Simulations show the operation of SFQ circuits at above 10 GHz with the junctions having characteristics similar to those of YBa2Cu3O7-x/Au/YBa2Cu3O7-x planar junctions. A similar concept is applied to NbN circuits operable above 10 K. A flip-flop counter using NbN junctions with Vm (1.5 mV)=3 mV and Delta =1.9 mV to model 12 K operation has been successfully simulated up to 5 GHz. Operating margins of only 26% on MVTL shift register were obtained by simulations, which is comparable to the margins for SFQ logic circuits. A counting SFQ analogue-to-digital converter can be improved by using an output buffered quantizer.

Superconductor Science and Technology•Nov 1, 1991•5 citations

VLSI complexity single flux quantum systems

Jabbari, Tahereh, Friedman, Eby G.

Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.

•Jan 1, 2023•0 citations

Vision for single flux quantum very large scale integrated technology

Arnold H. Silver, P. Bunyk, Alan W. Kleinsasser +1 more

Single flux quantum (SFQ) electronics is extremely fast and has very low on-chip power dissipation. SFQ VLSI is an excellent candidate for high-performance computing and other applications requiring extremely high-speed signal processing. Despite this, SFQ technology has generally not been accepted for system implementation. We argue that this is due, at least in part, to the use of outdated tools to produce SFQ circuits and chips. Assuming the use of tools equivalent to those employed in the semiconductor industry, we estimate the density of Josephson junctions, circuit speed, and power dissipation that could be achieved with SFQ technology. Today, CMOS lithography is at 90?65?nm with about 20 layers. Assuming equivalent technology, aggressively increasing the current density above 100?kA?cm?2 to achieve junction speeds approximately 1000?GHz, and reducing device footprints by converting device profiles from planar to vertical, one could expect to integrate about 250?M Josephson junctions cm?2 into SFQ digital circuits. This should enable circuit operation with clock frequencies above 200?GHz and place approximately 20?K gates within a radius of one clock period. As a result, complete microprocessors, including integrated memory registers, could be fabricated on a single chip.

Superconductor Science and Technology•Mar 16, 2006•6 citations

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

A High Performance and Robust FIFO Synchronizer-Interface for Crossing Clock Domains in SFQ Logic

Gourav Datta, Shidie Lin, Peter A. Beerel

Digital single-flux quantum (SFQ) technology promises to meet the demands of ultra low power and high speed computing needed for future exascale supercomputing platforms. However, clocking SFQ logic circuits remains a challenge due to the presence of a large number of on-chip clock sinks, and hence, decomposing large designs into multiple independent clock domains similar to CMOS, have been proposed. However, such clock domains demand efficient synchronizing First-in-first-out (FIFO) buffers and robust interfaces to safely transfer data from one clock domain to another. In this brief, we propose such a FIFO synchronizer and clock-domain crossing interface for both uni and bi-directional data transfer without any significant degradation of the clock frequency. Our proposal scales to complex gate-level pipelined SFQ logic cores while demonstrating extremely low Bit Error Rate (BER) and is unaffected by noise, given current SFQ lithography feature sizes.

arXiv:2108.03719•Aug 8, 2021•0 citations
Superconducting digital electronics, especially Single Flux Quantum (SFQ), has emerged as a promising beyond-CMOS technology with Josephson junctions (JJ) as the active device. It has the potential to meet the booming demands of lower power consumption and higher operation speeds in the electronics industry and future exascale supercomputing systems. Despite these promises, scaling SFQ circuits remains a serious challenge that motivates the support of multiple SFQ clock domains. Towards this end, this paper analyzes the impact of setup time violations and metastability in SFQ circuits comparing the derived analytical models to their CMOS counterparts. It also proposes new techniques to reduce the average latency in metastability-tolerant SFQ synchronizers, and evaluates their effects on the layout and critical margin of the design. It further extends the proposed model to estimate the Mean Time Between Failure (MTBF) of flip-flop-based synchronizers and shows that their MTBF with the current feature sizes is unaffected by noise, similar to CMOS. Finally, it curve fits this model to simulations using the state-of-the-art SFQ5ee process and shows that a two-flop SFQ synchronizer with a clock frequency of 25 GHz has an estimated MTBF of ~106years.
Digital single-flux quantum (SFQ) technology promises to meet the demands of ultralow-power and high-speed computing needed for future exascale supercomputing systems. However, high degrees of variability makes ultrahigh-speed low-skew clock distribution of large-scale SFQ circuits challenging. This article proposes to mitigate this problem by supporting multiple independent SFQ clock domains with the design of reliable clock domain crossing (CDC) circuits. We first show that previously proposed CDC first-in-first-out buffers (FIFOs) are vulnerable to synchronization errors, motivating the need for more robust CDC FIFOs. Inspired by complementary metal-oxide-semiconductor (CMOS) multi-flip-flop FIFO synchronizers, we then present a metastability-resilient SFQ FIFO synchronizer that, simulations show, delivers over a 1000 reduction in logical error rate at 30 GHz. We show that, for a 10-stage FIFO, the Josephson junction area of our proposed design is only 7.5% larger than the nonresilient counterpart. Finally, we propose detailed design guidelines that define the minimal depth of our proposed synchronizers subject to both throughput and burstiness constraints.
This paper presents a study on the merits of single flux quantum (SFQ) logic in superconducting digital electronics. With no requirements for an external RF clock source, the speed of SFQ logic circuits can exceed 100 GHz, orders of magnitude higher than latching logic circuits. Use of overdamped junctions in SFQ circuits makes this logic available for already developed high-Tc junctions. Simulations show the operation of SFQ circuits at above 10 GHz with the junctions having characteristics similar to those of YBa2Cu3O7-x/Au/YBa2Cu3O7-x planar junctions. A similar concept is applied to NbN circuits operable above 10 K. A flip-flop counter using NbN junctions with Vm (1.5 mV)=3 mV and Delta =1.9 mV to model 12 K operation has been successfully simulated up to 5 GHz. Operating margins of only 26% on MVTL shift register were obtained by simulations, which is comparable to the margins for SFQ logic circuits. A counting SFQ analogue-to-digital converter can be improved by using an output buffered quantizer.
Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.
Single flux quantum (SFQ) electronics is extremely fast and has very low on-chip power dissipation. SFQ VLSI is an excellent candidate for high-performance computing and other applications requiring extremely high-speed signal processing. Despite this, SFQ technology has generally not been accepted for system implementation. We argue that this is due, at least in part, to the use of outdated tools to produce SFQ circuits and chips. Assuming the use of tools equivalent to those employed in the semiconductor industry, we estimate the density of Josephson junctions, circuit speed, and power dissipation that could be achieved with SFQ technology. Today, CMOS lithography is at 90?65?nm with about 20 layers. Assuming equivalent technology, aggressively increasing the current density above 100?kA?cm?2 to achieve junction speeds approximately 1000?GHz, and reducing device footprints by converting device profiles from planar to vertical, one could expect to integrate about 250?M Josephson junctions cm?2 into SFQ digital circuits. This should enable circuit operation with clock frequencies above 200?GHz and place approximately 20?K gates within a radius of one clock period. As a result, complete microprocessors, including integrated memory registers, could be fabricated on a single chip.
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
Digital single-flux quantum (SFQ) technology promises to meet the demands of ultra low power and high speed computing needed for future exascale supercomputing platforms. However, clocking SFQ logic circuits remains a challenge due to the presence of a large number of on-chip clock sinks, and hence, decomposing large designs into multiple independent clock domains similar to CMOS, have been proposed. However, such clock domains demand efficient synchronizing First-in-first-out (FIFO) buffers and robust interfaces to safely transfer data from one clock domain to another. In this brief, we propose such a FIFO synchronizer and clock-domain crossing interface for both uni and bi-directional data transfer without any significant degradation of the clock frequency. Our proposal scales to complex gate-level pipelined SFQ logic cores while demonstrating extremely low Bit Error Rate (BER) and is unaffected by noise, given current SFQ lithography feature sizes.