Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Vision for single flux quantum very large scale integrated technology

Arnold H. Silver, P. Bunyk, Alan W. Kleinsasser, J.W. Spargo

Published Mar 16, 2006• 6 citations
Publisher

Abstract

Single flux quantum (SFQ) electronics is extremely fast and has very low on-chip power dissipation. SFQ VLSI is an excellent candidate for high-performance computing and other applications requiring extremely high-speed signal processing. Despite this, SFQ technology has generally not been accepted for system implementation. We argue that this is due, at least in part, to the use of outdated tools to produce SFQ circuits and chips. Assuming the use of tools equivalent to those employed in the semiconductor industry, we estimate the density of Josephson junctions, circuit speed, and power dissipation that could be achieved with SFQ technology. Today, CMOS lithography is at 90?65?nm with about 20 layers. Assuming equivalent technology, aggressively increasing the current density above 100?kA?cm?2 to achieve junction speeds approximately 1000?GHz, and reducing device footprints by converting device profiles from planar to vertical, one could expect to integrate about 250?M Josephson junctions cm?2 into SFQ digital circuits. This should enable circuit operation with clock frequencies above 200?GHz and place approximately 20?K gates within a radius of one clock period. As a result, complete microprocessors, including integrated memory registers, could be fabricated on a single chip.

DOI
10.1088/0953-2048/19/5/s30

Related papers

Current status and future prospect of the Nb-based fabrication process for single flux quantum circuits

Mutsuo Hidaka, Shuichi Nagasawa, T. Satoh +2 more

The Superconductivity Research Laboratory has successfully fabricated large quantities of single flux quantum (SFQ) large scale integrated circuits, including several thousands of Josephson junctions (JJs). Using a Jc = 2.5 kA cm−2 process in which the number of Nb layers was four and the minimum JJ size was 2 µm square. We developed a new advanced fabrication process that produced a Jc = 10 kA cm−2, nine Nb layers and a minimum JJ size of 1 µm square. The increase in the number of Nb layers was achieved by using a planarization technique. The target of our next generation process is a Jc = 40 kA cm−2 with a 0.5 µm square for the minimum junction size. This specification will be achieved by using advanced semiconductor technologies. This process will enable SFQ circuits to be produced with one million JJs on a chip and achieve a clock frequency greater than 100 GHz.

Superconductor Science and Technology•Feb 15, 2006•62 citations

Superconducting digital electronics

H. Hayakawa, Nobuyuki Yoshikawa, Shinichi Yorozu +1 more

Single-flux quantum logic (SFQ) circuits, in which a flux quantum is used as an information carrier, have the possibility for opening the door to a new digital system operated at over 100-GHz clock frequency at extremely low power dissipation. The SFQ logic system is a so-called pulse logic, which is completely different from the level logic for semiconductors like CMOS, so circuit design technologies for SFQ logic circuits have to be newly developed. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits at high speeds has been made. With advances in these design tools, large-scale circuits including more than several thousand junctions can be easily operated with the clock frequency of more than several tens of gigahertz. High-end routers and high-end computers are possible applications of SFQ logic circuits because of their high throughput nature and the low power dissipation of SFQ logic. In this paper, recent advances of SFQ circuit design technologies and recent developments of switches for high-end routers and microprocessors for high-end computers that are considered possible applications for SFQ logic will be described.

Proceedings of the IEEE•Sep 20, 2004•73 citations

Development of superconductor electronics technology for high-end computing

Arnold H. Silver, Alan W. Kleinsasser, G.L. Kerber +4 more

This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm −2 , 1.25 µm junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s −1 , both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density.

Superconductor Science and Technology•Oct 31, 2003•19 citations

Superconducting Digital Electronics Based on Single Flux Quantum

Hisao Hayakawa

Single flux quantum (SFQ) logic circuits, in which a single flux quantum is used for an information carrier, have a possibility to open a new digital system operated with over 100 GHz clock frequencies at extremely low power dissipations. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits with high speeds has been done. By taking advancements in these designing tools, circuits including more than several thousands junctions easily operated with the clock frequency of more than several tens GHz. Applications of SFQ circuits such as high performance computers, high end router and high end servers are being developed in the world taking advantages of the high through-put nature and the low power dissipation of the SFQ logic.

Chinese Journal of Physics•Aug 1, 2004•0 citations

High-Speed Operation of a Single-Flux-Quantum (SFQ) Cross/Bar Switch up to 35 GHz

義男 亀田, Shinichi Yorozu, Hirotaka Terai +1 more

Single-flux-quantum (SFQ) technology is a novel technology where binary information is represented by a single flux. It enables us to realize high-speed, low-power SFQ logic circuits, surpassing conventional complementary metal-oxide-silicon (CMOS) technology. We proposed an SFQ packet switch to avoid the bottlenecks in broadband networks of the future. To demonstrate high-speed operation of an SFQ logic circuit and its application to our switch architecture, we designed a cross/bar switch. It consists of 13 logic gates and 581 Josephson junctions were used in the layout. We confirmed correct operations up to 33 GHz in simulation. We placed the switch circuit in an on-chip test system for high-speed (over 10 GHz) test. Including I/O circuits, the system as a whole consists of 1236 Josephson junctions. The chip was fabricated by using NEC's standard Nb process. We carried out an on-chip test and found correct operations up to 35 GHz.

Japanese Journal of Applied Physics•Apr 30, 2003•8 citations

VLSI complexity single flux quantum systems

Jabbari, Tahereh, Friedman, Eby G.

Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.

•Jan 1, 2023•0 citations
Single flux quantum (SFQ) electronics is extremely fast and has very low on-chip power dissipation. SFQ VLSI is an excellent candidate for high-performance computing and other applications requiring extremely high-speed signal processing. Despite this, SFQ technology has generally not been accepted for system implementation. We argue that this is due, at least in part, to the use of outdated tools to produce SFQ circuits and chips. Assuming the use of tools equivalent to those employed in the semiconductor industry, we estimate the density of Josephson junctions, circuit speed, and power dissipation that could be achieved with SFQ technology. Today, CMOS lithography is at 90?65?nm with about 20 layers. Assuming equivalent technology, aggressively increasing the current density above 100?kA?cm?2 to achieve junction speeds approximately 1000?GHz, and reducing device footprints by converting device profiles from planar to vertical, one could expect to integrate about 250?M Josephson junctions cm?2 into SFQ digital circuits. This should enable circuit operation with clock frequencies above 200?GHz and place approximately 20?K gates within a radius of one clock period. As a result, complete microprocessors, including integrated memory registers, could be fabricated on a single chip.
The Superconductivity Research Laboratory has successfully fabricated large quantities of single flux quantum (SFQ) large scale integrated circuits, including several thousands of Josephson junctions (JJs). Using a Jc = 2.5 kA cm−2 process in which the number of Nb layers was four and the minimum JJ size was 2 µm square. We developed a new advanced fabrication process that produced a Jc = 10 kA cm−2, nine Nb layers and a minimum JJ size of 1 µm square. The increase in the number of Nb layers was achieved by using a planarization technique. The target of our next generation process is a Jc = 40 kA cm−2 with a 0.5 µm square for the minimum junction size. This specification will be achieved by using advanced semiconductor technologies. This process will enable SFQ circuits to be produced with one million JJs on a chip and achieve a clock frequency greater than 100 GHz.
Single-flux quantum logic (SFQ) circuits, in which a flux quantum is used as an information carrier, have the possibility for opening the door to a new digital system operated at over 100-GHz clock frequency at extremely low power dissipation. The SFQ logic system is a so-called pulse logic, which is completely different from the level logic for semiconductors like CMOS, so circuit design technologies for SFQ logic circuits have to be newly developed. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits at high speeds has been made. With advances in these design tools, large-scale circuits including more than several thousand junctions can be easily operated with the clock frequency of more than several tens of gigahertz. High-end routers and high-end computers are possible applications of SFQ logic circuits because of their high throughput nature and the low power dissipation of SFQ logic. In this paper, recent advances of SFQ circuit design technologies and recent developments of switches for high-end routers and microprocessors for high-end computers that are considered possible applications for SFQ logic will be described.
This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm −2 , 1.25 µm junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s −1 , both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density.
Single flux quantum (SFQ) logic circuits, in which a single flux quantum is used for an information carrier, have a possibility to open a new digital system operated with over 100 GHz clock frequencies at extremely low power dissipations. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits with high speeds has been done. By taking advancements in these designing tools, circuits including more than several thousands junctions easily operated with the clock frequency of more than several tens GHz. Applications of SFQ circuits such as high performance computers, high end router and high end servers are being developed in the world taking advantages of the high through-put nature and the low power dissipation of the SFQ logic.
Single-flux-quantum (SFQ) technology is a novel technology where binary information is represented by a single flux. It enables us to realize high-speed, low-power SFQ logic circuits, surpassing conventional complementary metal-oxide-silicon (CMOS) technology. We proposed an SFQ packet switch to avoid the bottlenecks in broadband networks of the future. To demonstrate high-speed operation of an SFQ logic circuit and its application to our switch architecture, we designed a cross/bar switch. It consists of 13 logic gates and 581 Josephson junctions were used in the layout. We confirmed correct operations up to 33 GHz in simulation. We placed the switch circuit in an on-chip test system for high-speed (over 10 GHz) test. Including I/O circuits, the system as a whole consists of 1236 Josephson junctions. The chip was fabricated by using NEC's standard Nb process. We carried out an on-chip test and found correct operations up to 35 GHz.
Superconductive electronics and, specifically, single flux quantum (SFQ) circuits are attracting significant attention as a promising ultra-low power and ultra-high speed circuit technology for beyond CMOS exascale supercomputing. Superconductive electronics is suitable for large scale, energy efficient, stationary cloud computing, ”big data” applications, and ultra-high speed neural networks. Significant development in the design and manufacture of superconductive electronics for prospective exascale computing systems has led to device densities exceeding 4.2×10^6 Josephson junctions (JJs) per cm2 – sufficient to enable large scale SFQ systems. The lack of electronic design automation (EDA) tools, however, is currently a serious issue affecting the development of complex SFQ circuits. Advances in EDA algorithms and design and analysis methodologies and techniques are therefore required to enhance the development of VLSI complexity SFQ systems. In this dissertation, issues and solutions to enable, connect, and secure VLSI complexity SFQ system are presented. Topics such as interconnects, ultra-high speed clocking and synchronization, signal interfaces, and deep scaling of superconductive structures are described, and related design methodologies, algorithms, circuits, and expressions are proposed. On-chip signal routing has become an issue of growing importance in modern VLSI complexity SFQ systems. Specialized routing methods for these systems are presented. The routing methods include passive transmission lines as global interconnect and Josephson transmission lines as local interconnect. Guidelines are provided for determining when to use global and local interconnects. Novel methodologies, algorithms, and expressions have been developed to manage resonance, flux trapping, and coupling in VLSI complexity SFQ circuits. The design of an SFQ clock distribution network is a challenging problem due to timing uncertainties at very high frequencies, gate-level pipelining, and fanout constraints. Near zero skew clock tree targeting large scale SFQ circuits is proposed to improve the global timing process while eliminating skew uncertainty. To enable higher fanout, area efficient splitter topologies are developed, producing a clock network suitable for large scale SFQ systems. All-JJ superconductive circuits based on bistable superconductor-ferromagnet-superconductor are presented to enable nanometer feature sizes for VLSI superconductive systems. These specialized guidelines, algorithms, and circuits enable deep scaling of superconductive systems for stationary high speed, ultra-low energy applications.