Probing Non-Equilibrium Pair-Breaking and Quasiparticle Dynamics in Nb Superconducting Resonators Under Magnetic Fields
Jigang Wang, Joong‐Mok Park, Zhi Xiang Chong, Richard H. J. Kim, Samuel Haeuser, R. K. Chan, Akshay A. Murthy, Anna Grassellino, Alex Romanenko, Cameron Kopas, Jayss Marshall, J. Mutus, Kameshwar K. Yadavalli, Ella Lachman, Daniel Setiawan
We conducted a comprehensive study of the non-equilibrium dynamics of Cooper pair breaking, quasiparticle (QP) generation, and relaxation in niobium (Nb) cut from superconducting radio-frequency (SRF) cavities, as well as various Nb resonator films from transmon qubits. Using ultrafast pump-probe spectroscopy, we were able to isolate the superconducting coherence and pair-breaking responses. Our results reveal both similarities and notable differences in the temperature- and magnetic-field-dependent dynamics of the SRF cavity and thin-film resonator samples. Moreover, femtosecond-resolved QP generation and relaxation under an applied magnetic field reveals a clear correlation between non-equilibrium QPs and the quality factor of resonators fabricated by using different deposition methods, such as DC sputtering and high-power impulse magnetron sputtering. These findings highlight the pivotal influence of fabrication techniques on the coherence and performance of Nb-based quantum devices, which are vital for applications in superconducting qubits and high-energy superconducting radio-frequency applications.
We conducted a comprehensive study of the non-equilibrium dynamics of Cooper pair breaking, quasiparticle (QP) generation, and relaxation in niobium (Nb) cut from superconducting radio-frequency (SRF) cavities, as well as various Nb resonator films from transmon qubits. Using ultrafast pump-probe spectroscopy, we were able to isolate the superconducting coherence and pair-breaking responses. Our results reveal both similarities and notable differences in the temperature- and magnetic-field-dependent dynamics of the SRF cavity and thin-film resonator samples. Moreover, femtosecond-resolved QP generation and relaxation under an applied magnetic field reveals a clear correlation between non-equilibrium QPs and the quality factor of resonators fabricated by using different deposition methods, such as DC sputtering and high-power impulse magnetron sputtering. These findings highlight the pivotal influence of fabrication techniques on the coherence and performance of Nb-based quantum devices, which are vital for applications in superconducting qubits and high-energy superconducting radio-frequency applications.
Even in the quantum limit, non-equilibrium quasiparticle (QP) populations induce QP poisoning that irreversibly relaxes the quantum state and significantly degrades the coherence of transmon qubits. A particularly detrimental yet previously unexplored mechanism arises from QP multiplication facilitated by vortex trapping in superconducting quantum circuits, where a high-energy QP relaxes by breaking additional Cooper pairs and amplifying the QP population due to the locally reduced excitation gap and enhanced quantum confinement within the vortex core. Here we directly resolve this elusive QP multiplication process by revealing vortex-controlled QP self-generation in a highly nonequilibrium regime preceding the phonon bottleneck of QP relaxation. At sufficiently low fluence, femtosecond-resolved magneto-reflection spectroscopy directly reveals a continuously increasing QP population that is strongly dependent on magnetic-field-tuned vortex density and absent at higher excitation fluences. Quantitative analysis of the emergent QP pre-bottleneck dynamics further reveals that, although the phonon population saturates within $\simeq$10~ps, both free and trapped QPs continue to grow in a self-sustained manner--hallmarks of the long-anticipated QP-vortex interactions in nonequilibrium superconductivity. We estimate a substantial increase of $\sim$34\% in QP density at vortex densities of ∼ 100 magnetic flux quanta per μm2. Our findings establish a powerful spectroscopic tool for uncovering QP multiplication and reveal vortex-assisted QP relaxation as a critical materials bottleneck whose mitigation will be essential for resolving QP poisoning and enhancing coherence in superconducting qubits.
Niobium is a widely accepted material for quantum computing device as well as superconducting radio frequency (SRF) technology. Superconducting niobium is a marginal type II superconductor which has a very narrow gap (~20-30 mT) of the mixed state at 2K, even showing the intermediate state (IMS) at the early stage of magnetic vortex penetration. Tremendous progress has been made in understanding the impact of the Nb surface and bulk superconductivities on SRF resonator performance. However, the effect of thin superconducting Nb films for quantum computing applications requires further examination. In this study, we explore the fundamental superconducting properties of various thin Nb films and compare them with respect to the energy relaxation time, T1, measured from superconducting qubit fabricated with these films. The Nb films are fabricated both with or without a surface protective layer that prevents the formation of lossy Nb2O5. Electromagnetic properties are characterized by means of bulk magnetization, electromagnetic transport, and dynamics of surface superconductivity. In addition, analytical electron microscopy is implemented to further connect the superconducting properties to microstructure.
Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, the London penetration depth - based quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. We study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circuits such as those used in quantum computers. The films have a superconducting transition temperature of Tc=9.35 K and a fairly clean superconducting gap. The estimated superfluid density is enhanced at intermediate temperatures. These observations are consistent with the recent theory of anisotropic strong-coupling superconductivity in Nb and indicate outstanding quality. However, the response to the magnetic field is complicated, exhibiting significantly irreversible behavior and insufficient heat dissipation (to a substrate), leading to thermomagnetic instabilities. This may present a challenge for further improvement of transmon quantum coherence. Possible mitigation strategies are discussed.
Micro-fabricated superconducting circuits have emerged as a leading candidate for quantum computers. However, typical error rates of 10-3 for quantum gates remain a challenge for performing error correction and need to be further decreased for achieving practical quantum computation. Improving qubit coherence times for superconducting qubits is a continuous endeavor in order to decrease error rates. As part of this effort, a topic addressed in this dissertation is the study of the generation mechanism and dynamics of non-equilibrium quasiparticles (QPs), which are electron-like excitations of a superconductor. This source of decoherence was studied by measuring the rate of single-electron changes in the parity state of multiple charge-sensitive transmon qubits under different conditions. The presence of non-equilibrium QPs in superconducting resonators and qubits operating at millikelvin temperature has been known for decades. Understanding the sources and dynamics of these QPs is crucial to evaluate and improve the performance of the devices. Specifically, for superconducting qubits, a single QP tunneling across the Josephson junction changes the total charge parity from even to odd or vice versa, and can induce energy relaxation and dephasing, limiting the coherence of the device. To study the dynamics of non-equilibrium QPs, I utilized a Ramsey-like pulse sequence to measure the rate of single-electron parity changes in transmon qubits, which had a weak charge dispersion, with different shunting capacitor geometries and materials. I started out by measuring a charge parity rate of ~ 33 s-1 for a grounded "x-mon" qubit and ~ 17 s-1 for a galvanically isolated "two-pads" qubit with our standard setup. These rates decreased to ~ 5 s-1 and ~ 2 s-1 for the x-mon and two-pads respectively when IR-filters and extra layers of shielding were installed. From my measurements, I found that the charge parity rates are sensitive to the geometry of the shunting capacitor, weakly depend on the amount of shielding surrounding the device, and independent of using Al or Ta for the superconducting shunting capacitor. To distinguish between two possible mechanisms for the parity switching, I measured the parity rates after cooling one of the qubit devices in an external magnetic field to induce vortices in the superconducting electrodes. After increasing the magnetic field above 23 μT, I measured a faster QP trapping rate and a much smaller T1, suggesting that at least one vortex was added to the superconducting electrode near the Josephson junction. On the other hand, the measured charge parity rates exhibited no clear dependence on the background QP trapping rates. These data suggest that a large portion of parity switching events occurs from QPs being produced at the Josephson junction, where pair-breaking radiation is rectified into QPs by the junction, as opposed to tunneling of QPs residing in the electrodes. To understand the difference in the measured parity rates, I simulated the absorption efficiency of pair-breaking radiation for my two designs and observed a similar difference in absorption rates when a single-mode blackbody radiation with an effective temperature T* ~ 300 mK was assumed to be illuminating the devices. This large T*, which is significantly higher than the device's nominal temperature of 20 mK, is consistent with values reported in the literature. However, its physical origin remains not fully understood. For the other part of my dissertation, I developed a new simplified process for making superconducting air bridges. Air bridges are used to suppress unwanted extraneous high frequency chip modes parasitic to superconducting quantum circuits that can couple to qubits and cause decoherence. Traditional ways of making air bridges utilize thermal reflow to create arched photoresist scaffolds that are limited in heights. This results in insufficient mechanical strength of the bridges which tend to collapse when spanning to larger lengths. My simplified fabrication method that utilizes two-photon lithography, a technique that enables creation of three-dimensional micron-scale structures, relaxes this limitation and is capable of making mechanically stable bridges with lengths up to 100 μm. The resulting Al air bridges, having a superconducting transition temperature of Tc = 1.08 mK and a dc residual resistivity ratio of 3.85, were confirmed to form a good electrical contact with the base metal layers and exhibit a small measurable amount of rf loss when placed over coplanar waveguide resonators, on par with other air bridge fabrication methods.
This dissertation describes energy dissipation and microwave loss due to non-equilibrium quasiparticles in superconducting transmon qubits and titanium nitride coplanar waveguide resonators. During the measurements of transmon T1 relaxation time and resonator quality factor QI, I observed reduced microwave loss as the temperature increased from 20 mK to approximately Tc/10 at which the loss takes on a minimum value. I argue that this effect is due to non-equilibrium quasiparticles. I measured the temperature dependence of the relaxation time T1 of the excited state of an Al/AlOx/Al transmon and found that, in some cases, T1 increased by almost a factor of two as the temperature increased from 30 mK to 100 mK with a best T1 of 0.2 ms. I present an argument showing this unexpected temperature dependence occurs due to the behavior of non-equilibrium quasiparticles in devices in which one electrode in the tunnel junction has a smaller volume, and slightly smaller superconducting energy gap, than the other electrode. At sufficiently low temperatures, non-equilibrium quasiparticles accumulate in the electrode with the smaller gap, leading to a relatively high density of quasiparticles at the junction and a short T1. Increasing the temperature gives the quasiparticles enough thermal energy to occupy the higher gap electrode, reducing the density at the junction and increasing T1. I present a model of this effect, extract the density of quasiparticles and the two superconducting energy gaps, and discuss implications for increasing the relaxation time of transmons. I also observed a similar phenomenon in low temperature microwave studies of titanium nitride coplanar waveguide resonators. I report on loss in a resonator at temperatures from 20 mK up to 1.1 K and with the application of infrared pair breaking radiation (λ=1.55 μm). With no applied IR light, the internal quality factor increased from QI = 800,000 at T < 70 mK up to QI=(2×10^6 ) at 600 mK. The resonant frequency f0 increased by 2 parts per million over the same temperature range. Above 600 mK both QI and f0 decreased rapidly, consistent with the increase in the density of thermally generated quasiparticles. With the application of IR light and for intensities below 1 aW μm^(-2) and T < 400 mK, QI increased in a similar way to increasing the temperature before beginning to decrease with larger intensities. I show that a model involving non-equilibrium quasiparticles and two regions of different superconducting gaps can explain this unexpected behavior.
Niobium films typically constitute a significant component in the construction of modern two-dimensional superconducting qubit architectures, yet their contribution to the total decay rate is not fully understood, making it difficult to definitively identify dominant loss channels in present designs. We present the first study, which correlates direct measurements of RF losses in such films to material parameters by investigating a high-power impulse magnetron sputtered (HiPIMS) film atop a three-dimensional niobium superconducting radiofrequency (SRF) resonator. Our findings indicate that microwave dissipation in the HiPIMS-prepared niobium films, within the quantum regime, resembles that of record-high intrinsic quality factor of bulk niobium SRF cavities, with lifetimes extending into seconds. Microstructure and impurity level of the niobium film do not significantly affect the losses. These results set the scale of microwave losses in niobium films and show that niobium losses do not dominate the observed coherence times in present two-dimensional superconducting qubit designs, instead highlighting the role of the dielectric oxide in limiting the performance.