Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Compact 852 nm Faraday optical frequency standard

Zhiyang Wang, Zijie Liu, Jyoti, Hangbo Shi, Xiaomin Qin, Xiaolei Guan, Jia Zhang, Zhihong Gao, Tiantian Shi, Jingbiao Chen

Published Jan 20, 2025• 8 citations
Publisher

Abstract

Optical clocks with high precision are practical and necessary in atomic physics, geodesy, gravitational wave measurement, etc. Transportability and environmental adaptability are two key indicators to measure the performance of frequency standards. Here, we utilized a highly robust atomic-filter-based Faraday laser as the local oscillator, and achieved two compact Faraday optical frequency standards based on 133Cs6S1/2|F=3⟩→6P3/2|F′=2⟩ and 6S1/2|F=4⟩→6P3/2|F′=5⟩ transitions at 852 nm, leveraging modulation transfer spectroscopy for laser frequency stabilization. The Faraday laser automatically aligns atomic transition spectral lines, due to the use of atomic filters as frequency selective elements. Therefore, the laser wavelength has strong robustness against environmental changes. This setup not only simplifies the operational complexity but also ensures frequency stability. By heterodyne beating between two such compact optical frequency standards, the beatnote achieved a short-term frequency stability of 1.68 × 10−13 at 3 s, remained at the 10−13 level for up to 400 s, and stayed below 2.7 × 10−12 for up to 1600 s, predominantly exhibiting white frequency noise. This underscores the potential of atomic-filter-based Faraday laser in realizing compact and stable frequency standards, mitigating coherent communication error rates, and enhancing the precision of quantum interferometric measurements. Moreover, this approach eliminates the continuous need for external monitoring and adjustments, thereby, offering a practical and robust solution for out of laboratory applications demanding high frequency stability.

DOI
10.1063/5.0236915

Related papers

Switchable Faraday laser with frequencies of 85Rb and 87Rb 780 nm transitions using a single isotope 87Rb Faraday atomic filter

Xiaomin Qin, Zijie Liu, Hangbo Shi +4 more

In the development of atomic physics, laser sources with Frequencies corresponding to atomic transition and high stability are essential. The Faraday laser is a special diode laser using the Faraday anomalous dispersion optical filter (FADOF) to realize frequency selection, so the output laser frequency is automatically limited to the atomic Doppler broadening. However, the frequency of a Faraday laser corresponds to the range around only one atomic hyperfine transition. Here, we realize a switchable Faraday laser with two isotopes laser frequencies corresponding to 85Rb 52S1/2 (F=3)→52P3/2 and 87Rb 52S1/2 (F=2)→52P3/2 transitions based on a single isotope 87Rb-FADOF. The laser has good robustness against the fluctuation of diode current and temperature, with wavelength fluctuating within 0.8 pm from 16 to 30 °C of diode temperature, and has a free-running linewidth of 18 kHz. We also lock the laser frequency to the two cycling transitions of 85Rb 52S1/2 (F=3)→52P3/2 (F′=4) and 87Rb 52S1/2 (F=2)→52P3/2 (F′=3) by the modulation transfer spectroscopy technique. The Allan deviation of the residual error signal is 3×10−14/τ, and the frequency stability of the beat detection reaches 2.8×10−12 at 1 s integration time. This 780 nm switchable Faraday laser expands the application scenarios of Faraday lasers, which can be used in laser cooling atoms, optical frequency standards, and other quantum precision measurement fields.

Applied Physics Letters•Apr 15, 2024•20 citations

A tunable dual-frequency rubidium Faraday laser

Xiaomin Qin, Zijie Liu, Zhiyang Wang +7 more

Dual-frequency (DF) lasers with specific frequency intervals have crucial applications in geometric measurement, optical microwave generation, quantum precision measurement, etc. Here, we report a 780 nm DF rubidium Faraday laser, with two modes’ frequencies corresponding to the 85 Rb and 87 Rb D 2 transitions. The microwave signal generated from the two laser modes’ beat has a linewidth of 671 Hz and is tunable from 4.7–4.95 GHz to 5.94–6.7 GHz by adjusting the diode current. Moreover, we use modulation transfer spectroscopy to lock one of the laser modes to the 87 Rb hyperfine transition, and the frequency stability improves nearly an order of magnitude. The noise characteristics are also measured, where the phase noise is suppressed over 25 dB at 100 Hz offset compared to the microwave signal generated by two single-mode lasers’ heterodyne beat. This 780 nm DF rubidium Faraday laser has two coherent modes with frequencies related to Rb transitions, which provides a promising and convenient method for compact atomic physics applications, such as coherent population trapping clocks, atom gravimeters, and so on.

Optics & Laser Technology•Jun 26, 2025•4 citations

Compact optical frequency standard based on a miniature cell using modulation transfer spectroscopy

Jiqing Lian, Qiaohui Yang, Tianyu Liu +8 more

This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.

Chinese Optics Letters•Jan 1, 2025•2 citations

Active Faraday optical frequency standard

Wei Zhuang, Jingbiao Chen

We propose the mechanism of an active Faraday optical clock, and experimentally demonstrate an active Faraday optical frequency standard based on narrow bandwidth Faraday atomic filter by the method of velocity-selective optical pumping of cesium vapor. The center frequency of the active Faraday optical frequency standard is determined by the cesium 6 (2)S(1/2) F=4 to 6 (2)P(3/2) F'=4 and 5 crossover transition line. The optical heterodyne beat between two similar independent setups shows that the frequency linewidth reaches 281(23) Hz, which is 1.9×10(4) times smaller than the natural linewidth of the cesium 852-nm transition line. The maximum emitted light power reaches 75 μW. The active Faraday optical frequency standard reported here has advantages of narrow linewidth and reduced cavity pulling, which can readily be extended to other atomic transition lines of alkali and alkaline-earth metal atoms trapped in optical lattices at magic wavelengths, making it useful for new generation of optical atomic clocks.

arXiv:1407.3428•Optics Letters•Oct 29, 2014•60 citations

A 780 nm Dual-Frequency Faraday Laser

Xiaomin Qin, Zijie Liu, Tiantian Shi +1 more

We demonstrate a dual-frequency (DF) Faraday laser operating on 780 nm using an87Rb Faraday anomalous dispersion optical filter (FADOF) as the frequency selection element. The frequencies of the two modes correspond to the transition of87Rb 52S1/2(F=1) to 52P3/2and 52S1/2(F=2) to 52P3/2, respectively. The output laser wavelength has good robustness to the laser diode’s current and temperature fluctuations. The frequency difference between the two modes is tunable with the temperature of87Rb vapor cell and cavity length. Besides, the two modes share good coherence with the most probable linewidth of the beat-note spectra being 3 kHz. Such a 780 nm DF Faraday laser can be used in precision measurement, such as, laser frequency stabilization, optical microwave generation, and coherent population trapping (CPT) atomic clocks.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•0 citations

Frequency Stabilization of a 421 NM Laser via Modulation Transfer Spectroscopy

Jie Miao, 祝传文, Jingming Chen +8 more

Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the${ }^{87} \mathbf{R b}$atomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the$\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}$to$\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}$transition of${ }^{\mathbf{8 7}} \mathbf{R b}$. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of$7.8 \times 10^{-13}$at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2026•0 citations
Optical clocks with high precision are practical and necessary in atomic physics, geodesy, gravitational wave measurement, etc. Transportability and environmental adaptability are two key indicators to measure the performance of frequency standards. Here, we utilized a highly robust atomic-filter-based Faraday laser as the local oscillator, and achieved two compact Faraday optical frequency standards based on 133Cs6S1/2|F=3⟩→6P3/2|F′=2⟩ and 6S1/2|F=4⟩→6P3/2|F′=5⟩ transitions at 852 nm, leveraging modulation transfer spectroscopy for laser frequency stabilization. The Faraday laser automatically aligns atomic transition spectral lines, due to the use of atomic filters as frequency selective elements. Therefore, the laser wavelength has strong robustness against environmental changes. This setup not only simplifies the operational complexity but also ensures frequency stability. By heterodyne beating between two such compact optical frequency standards, the beatnote achieved a short-term frequency stability of 1.68 × 10−13 at 3 s, remained at the 10−13 level for up to 400 s, and stayed below 2.7 × 10−12 for up to 1600 s, predominantly exhibiting white frequency noise. This underscores the potential of atomic-filter-based Faraday laser in realizing compact and stable frequency standards, mitigating coherent communication error rates, and enhancing the precision of quantum interferometric measurements. Moreover, this approach eliminates the continuous need for external monitoring and adjustments, thereby, offering a practical and robust solution for out of laboratory applications demanding high frequency stability.
In the development of atomic physics, laser sources with Frequencies corresponding to atomic transition and high stability are essential. The Faraday laser is a special diode laser using the Faraday anomalous dispersion optical filter (FADOF) to realize frequency selection, so the output laser frequency is automatically limited to the atomic Doppler broadening. However, the frequency of a Faraday laser corresponds to the range around only one atomic hyperfine transition. Here, we realize a switchable Faraday laser with two isotopes laser frequencies corresponding to 85Rb 52S1/2 (F=3)→52P3/2 and 87Rb 52S1/2 (F=2)→52P3/2 transitions based on a single isotope 87Rb-FADOF. The laser has good robustness against the fluctuation of diode current and temperature, with wavelength fluctuating within 0.8 pm from 16 to 30 °C of diode temperature, and has a free-running linewidth of 18 kHz. We also lock the laser frequency to the two cycling transitions of 85Rb 52S1/2 (F=3)→52P3/2 (F′=4) and 87Rb 52S1/2 (F=2)→52P3/2 (F′=3) by the modulation transfer spectroscopy technique. The Allan deviation of the residual error signal is 3×10−14/τ, and the frequency stability of the beat detection reaches 2.8×10−12 at 1 s integration time. This 780 nm switchable Faraday laser expands the application scenarios of Faraday lasers, which can be used in laser cooling atoms, optical frequency standards, and other quantum precision measurement fields.
Dual-frequency (DF) lasers with specific frequency intervals have crucial applications in geometric measurement, optical microwave generation, quantum precision measurement, etc. Here, we report a 780 nm DF rubidium Faraday laser, with two modes’ frequencies corresponding to the 85 Rb and 87 Rb D 2 transitions. The microwave signal generated from the two laser modes’ beat has a linewidth of 671 Hz and is tunable from 4.7–4.95 GHz to 5.94–6.7 GHz by adjusting the diode current. Moreover, we use modulation transfer spectroscopy to lock one of the laser modes to the 87 Rb hyperfine transition, and the frequency stability improves nearly an order of magnitude. The noise characteristics are also measured, where the phase noise is suppressed over 25 dB at 100 Hz offset compared to the microwave signal generated by two single-mode lasers’ heterodyne beat. This 780 nm DF rubidium Faraday laser has two coherent modes with frequencies related to Rb transitions, which provides a promising and convenient method for compact atomic physics applications, such as coherent population trapping clocks, atom gravimeters, and so on.
This study investigates the application of miniature quantum references within small-scale optical atomic frequency standards, utilizing a diminutive 87 Rb glass cell, dimensions of 6 mm × 6 mm × 6 mm, to establish a quantum frequency standard.By employing the transition spectrum from 5 2 S 1/2 F = 2 to 5 2 P 3/2 F 0 =3, this study successfully demonstrates the development of a compact rubidium atomic optical frequency standard via modulation transfer spectroscopy (MTS).Subsequent to frequency stabilization, the 780 nm clock laser exhibits a linewidth of 6.9 kHz, and its out-of-loop short-term stability reaches 4.1 × 10 -13 @ 1 s, as confirmed through beat frequency analysis.This research not only provides a practical blueprint for the development of small optical atomic frequency standards but also lays down essential groundwork for future advancements in chip-level optical frequency standard technologies.
We propose the mechanism of an active Faraday optical clock, and experimentally demonstrate an active Faraday optical frequency standard based on narrow bandwidth Faraday atomic filter by the method of velocity-selective optical pumping of cesium vapor. The center frequency of the active Faraday optical frequency standard is determined by the cesium 6 (2)S(1/2) F=4 to 6 (2)P(3/2) F'=4 and 5 crossover transition line. The optical heterodyne beat between two similar independent setups shows that the frequency linewidth reaches 281(23) Hz, which is 1.9×10(4) times smaller than the natural linewidth of the cesium 852-nm transition line. The maximum emitted light power reaches 75 μW. The active Faraday optical frequency standard reported here has advantages of narrow linewidth and reduced cavity pulling, which can readily be extended to other atomic transition lines of alkali and alkaline-earth metal atoms trapped in optical lattices at magic wavelengths, making it useful for new generation of optical atomic clocks.
We demonstrate a dual-frequency (DF) Faraday laser operating on 780 nm using an87Rb Faraday anomalous dispersion optical filter (FADOF) as the frequency selection element. The frequencies of the two modes correspond to the transition of87Rb 52S1/2(F=1) to 52P3/2and 52S1/2(F=2) to 52P3/2, respectively. The output laser wavelength has good robustness to the laser diode’s current and temperature fluctuations. The frequency difference between the two modes is tunable with the temperature of87Rb vapor cell and cavity length. Besides, the two modes share good coherence with the most probable linewidth of the beat-note spectra being 3 kHz. Such a 780 nm DF Faraday laser can be used in precision measurement, such as, laser frequency stabilization, optical microwave generation, and coherent population trapping (CPT) atomic clocks.
Stable short-wavelength laser sources are essential for optical frequency control and play a key role in precision spectroscopy, Rydberg state detection, and cold atom experiments. Here, we report the frequency stabilization of a 421 nm blue laser to the87Rb{ }^{87} \mathbf{R b}87Rbatomic transition using modulation transfer spectroscopy (MTS). The laser is directly generated from a diode laser and stabilized to the52S1/2\mathbf{5}^{\mathbf{2}} \mathbf{S}_{\mathbf{1} / \mathbf{2}}52S1/2​to62P1/2\mathbf{6}^{\mathbf{2}} \mathbf{P}_{\mathbf{1} / \mathbf{2}}62P1/2​transition of87Rb{ }^{\mathbf{8 7}} \mathbf{R b}87Rb. A background-free dispersive error signal is generated via frequency modulation of the pump beam in a rubidium vapor cell, providing a robust frequency reference. For beat-note comparison measurements, two independent MTS-based frequency-stabilized laser systems were constructed, yielding a preliminary beat-note frequency stability of7.8×10−137.8 \times 10^{-13}7.8×10−13at 1 s. These results demonstrate the feasibility of robust frequency stabilization at 421 nm and indicate the potential of this approach for short-wavelength optical frequency references in precision atomic and quantum applications.