Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Quantum Engineering

Wavelet-Based Quantum Sensing of Geomagnetic Fluctuations With Multiple NV Ensembles

Chou-Wei Kiang, Jean‐Fu Kiang

Published Jan 1, 2025• 3 citations
Publisher

Abstract

Nitrogen-vacancy (NV) ensembles are viable magnetometers to be implemented on nanosatellites for monitoring geomagnetic fluctuations, which are credible precursors for predicting earthquakes at short notice. In this work, a Haar wavelet-based quantum sensing method is proposed to reconstruct the time-varying waveform of geomagnetic fluctuations in the very low frequency band. To collect different frequency components of fluctuations waveform at once, we propose a schematic to employ multiple NV ensembles (NVEs), with each controlled by an independent microwave source. Berry sequences are applied on one set of NVEs to extract the scaling coefficients from accumulated geometric phases to reconstruct near-dc components of a waveform. Spin-echo sequences are applied to another set of NVEs to extract the Haar wavelet coefficients from the dynamic phases to reconstruct high-frequency components. The efficacy of the proposed sensing protocol implemented on multiple NVEs is validated by reconstructing a waveform of geomagnetic fluctuations from a DEMETER satellite dataset through simulations. Each NVE is assumed to contain$N = 10^{8}$uncorrelated NV centers. The application of a Berry sequence to each NVE can achieve the maximum detectable magnetic field of over$460 \ \mu$T, resolving the issues of phase ambiguity and hyperfine-induced detuning if conventional Ramsey sequence were applied. The feasibility of the proposed simulation scenario considering spin-bath noise within an NVE is justified by simulations. The effects of wavelet scales, Rabi frequency in Berry sequence, and number of NV centers in each NVE are analyzed. The proposed NVE quantum sensors operated with the proposed sensing protocol can be installed on nanosatellites to monitor global geomagnetic fluctuations, with sub-$\mu$s temporal resolution in the near future.

DOI
10.1109/tqe.2025.3529868

Related papers

Quantum Sensing of Fast Time-Varying Magnetic Field With Daubechies Wavelets

Chou-Wei Kiang, Jian–Jiun Ding, Jean‐Fu Kiang

A quantum sensing protocol is proposed to apply continuous-wave microwave sequences modulated by Daubechies wavelets to control quantum sensors. The Daubechies wavelet coefficients thus extracted are used to reconstruct a fast time-varying magnetic field with higher smoothness, mitigating square-shaped artifacts as Haar wavelets or Walsh functions are used for modulation. The relations between the qubit readout, the accumulated phase of the quantum state, and the wavelet coefficients are derived based on an intuitive model represented on the Bloch sphere. The efficacy and accuracy of the proposed waveform reconstruction method under various conditions are evaluated by simulations.

IEEE Access•Jan 1, 2024•4 citations

Wavelet-based fast time-resolved magnetic sensing with electronic spins in diamond

Nanyang Xu, Feng-Jian Jiang, Yu Peng Tian +6 more

Time-resolved magnetic sensing is of great importance from fundamental studies to applications in physical and biological sciences. Recently, the nitrogen-vacancy defect center in diamond has been developed as a promising sensor of magnetic fields under ambient conditions. However, methods to reconstruct time-resolved magnetic fields with high sensitivity are not yet fully developed. Here, we propose and demonstrate a sensing method based on spin echo and Haar wavelet transformation. Our method is exponentially faster in reconstructing time-resolved magnetic fields with comparable sensitivity than existing methods. It is also easier to implement in experiments. Furthermore, the wavelet's unique features enable our method to extract information from the whole signal with only part of the measuring sequences. We then explore this feature for a fast detection of simulated nerve impulses. These results will be useful to time-resolved magnetic sensing with quantum probes at nanoscale.

arXiv:1512.07049•Physical review. B./Physical review. B•Apr 29, 2016•15 citations

Nanoscale covariance magnetometry with diamond quantum sensors

Jared Rovny, Zhiyang Yuan, Mattias Fitzpatrick +6 more

Nitrogen vacancy (NV) centers in diamond are atom-scale defects that can be used to sense magnetic fields with high sensitivity and spatial resolution. Typically, the magnetic field is measured by averaging sequential measurements of single NV centers, or by spatial averaging over ensembles of many NV centers, which provides mean values that contain no nonlocal information about the relationship between two points separated in space or time. Here, we propose and implement a sensing modality whereby two or more NV centers are measured simultaneously, and we extract temporal and spatial correlations in their signals that would otherwise be inaccessible. We demonstrate measurements of correlated applied noise using spin-to-charge readout of two NV centers and implement a spectral reconstruction protocol for disentangling local and nonlocal noise sources.

arXiv:2209.08703•Science•Dec 22, 2022•81 citations

Demonstration of vector magnetic field sensing by simultaneous control of nitrogen-vacancy centers in diamond using multi-frequency microwave pulses

Ken Yahata, Yuichiro Matsuzaki, Shiro Saito +2 more

An ensemble of nitrogen-vacancy (NV) centers in diamond is a fascinating candidate for realizing a sensitive magnetic field sensor. In particular, since the axes of the NV centers are distributed along four directions, a collection of measurement data from NV centers with different axes provides information on the vector components of a magnetic field. However, in the conventional approach, the low measurement contrast of NV centers limits the sensitivity of vector magnetic field sensing. Recently, to overcome this problem, multi-frequency control of the NV centers has been proposed. The key idea is that four types of NV centers with different axes are simultaneously controlled by multi-frequency microwave pulses. Here, we demonstrate vector magnetic field sensing with an ensemble of NV centers in diamond via such multi-frequency control with pulsed-type measurements. We use Hahn echo pulses and extract information on the vector components of an applied AC magnetic field. We find that the sensitivity of the vector field sensing with multi-frequency control is better than that with single-frequency control for every vector component of a magnetic field.

arXiv:1811.03203•Applied Physics Letters•Jan 14, 2019•36 citations

A nanoscale magnetic spectrum analyzer based on qubit dressed states

Jan Hendrik Rueschkamp, Shantam Ravan, Daniel Fernandez +6 more

Magnetic field fluctuations on nanometer length scales manifest in a diverse range of phenomena -- electron and spin dynamics in materials and devices, quantum many-body systems, and molecular chemistry. Measuring these phenomena requires sensors with a challenging combination of broad spectral bandwidth, high sensitivity, and nanoscale spatial resolution. Nitrogen-vacancy (NV) centers, atom-like quantum sensors in diamond, possess the requisite sensitivity and nanoscale sensing volume, but are typically limited in bandwidth by the practical speed of the applied quantum control sequence. Here, we overcome this limitation by exposing the NV qubit to a microwave dressing field during a dynamical decoupling sequence, which both amplifies and frequency-mixes target signals at arbitrary frequencies into the detection band of the dynamical decoupling protocol. We demonstrate this approach by using NV centers to detect both coherent and noisy nanoscale spin wave dynamics in a magnetic yttrium-iron-garnet (YIG) thin film over a broad frequency range. Our technique generalizes to other qubit platforms, providing a versatile framework for nanoscale spectroscopy across diverse physical and chemical systems.

arXiv:2606.05426•Jun 3, 2026•0 citations

Spectral analysis of amplitude-modulated microwave signals with nitrogen-vacancy centers in diamond

Yang Zhitao, Feifei Zhou, Jianghang Yu +4 more

Microwave (MW) magnetometry utilizing nitrogen-vacancy (NV) centers in diamond offers a broad, tunable detection bandwidth enabled by the magnetic-field-dependent electron spin resonances (ESR) of the NV centers. In this work, we present and experimentally demonstrate two NV-based protocols for spectral analysis of amplitude-modulated (MW) signals. The first protocol employs the NV center as a bandpass filter and reconstructs frequency-domain information of MW signals by sweeping the MW carrier frequency. The second protocol achieves optical imaging of the MW spectrum using an NV-based quantum spectrum analyzer, wherein a magnetic field gradient spatially maps the ESR frequencies of the NV centers, enabling parallel detection of multiple spectral components over a wide instantaneous bandwidth. Both protocols show results that agree well with reference measurements from a classical spectrum analyzer. Our approaches extend the application of spin-based quantum sensors to the field of modern communications and can be adapted for other spin-based quantum sensors.

Review of Scientific Instruments•Feb 1, 2026•1 citation
Nitrogen-vacancy (NV) ensembles are viable magnetometers to be implemented on nanosatellites for monitoring geomagnetic fluctuations, which are credible precursors for predicting earthquakes at short notice. In this work, a Haar wavelet-based quantum sensing method is proposed to reconstruct the time-varying waveform of geomagnetic fluctuations in the very low frequency band. To collect different frequency components of fluctuations waveform at once, we propose a schematic to employ multiple NV ensembles (NVEs), with each controlled by an independent microwave source. Berry sequences are applied on one set of NVEs to extract the scaling coefficients from accumulated geometric phases to reconstruct near-dc components of a waveform. Spin-echo sequences are applied to another set of NVEs to extract the Haar wavelet coefficients from the dynamic phases to reconstruct high-frequency components. The efficacy of the proposed sensing protocol implemented on multiple NVEs is validated by reconstructing a waveform of geomagnetic fluctuations from a DEMETER satellite dataset through simulations. Each NVE is assumed to containN=108N = 10^{8}N=108uncorrelated NV centers. The application of a Berry sequence to each NVE can achieve the maximum detectable magnetic field of over460 μ460 \ \mu460 μT, resolving the issues of phase ambiguity and hyperfine-induced detuning if conventional Ramsey sequence were applied. The feasibility of the proposed simulation scenario considering spin-bath noise within an NVE is justified by simulations. The effects of wavelet scales, Rabi frequency in Berry sequence, and number of NV centers in each NVE are analyzed. The proposed NVE quantum sensors operated with the proposed sensing protocol can be installed on nanosatellites to monitor global geomagnetic fluctuations, with sub-μ\muμs temporal resolution in the near future.
A quantum sensing protocol is proposed to apply continuous-wave microwave sequences modulated by Daubechies wavelets to control quantum sensors. The Daubechies wavelet coefficients thus extracted are used to reconstruct a fast time-varying magnetic field with higher smoothness, mitigating square-shaped artifacts as Haar wavelets or Walsh functions are used for modulation. The relations between the qubit readout, the accumulated phase of the quantum state, and the wavelet coefficients are derived based on an intuitive model represented on the Bloch sphere. The efficacy and accuracy of the proposed waveform reconstruction method under various conditions are evaluated by simulations.
Time-resolved magnetic sensing is of great importance from fundamental studies to applications in physical and biological sciences. Recently, the nitrogen-vacancy defect center in diamond has been developed as a promising sensor of magnetic fields under ambient conditions. However, methods to reconstruct time-resolved magnetic fields with high sensitivity are not yet fully developed. Here, we propose and demonstrate a sensing method based on spin echo and Haar wavelet transformation. Our method is exponentially faster in reconstructing time-resolved magnetic fields with comparable sensitivity than existing methods. It is also easier to implement in experiments. Furthermore, the wavelet's unique features enable our method to extract information from the whole signal with only part of the measuring sequences. We then explore this feature for a fast detection of simulated nerve impulses. These results will be useful to time-resolved magnetic sensing with quantum probes at nanoscale.
Nitrogen vacancy (NV) centers in diamond are atom-scale defects that can be used to sense magnetic fields with high sensitivity and spatial resolution. Typically, the magnetic field is measured by averaging sequential measurements of single NV centers, or by spatial averaging over ensembles of many NV centers, which provides mean values that contain no nonlocal information about the relationship between two points separated in space or time. Here, we propose and implement a sensing modality whereby two or more NV centers are measured simultaneously, and we extract temporal and spatial correlations in their signals that would otherwise be inaccessible. We demonstrate measurements of correlated applied noise using spin-to-charge readout of two NV centers and implement a spectral reconstruction protocol for disentangling local and nonlocal noise sources.
An ensemble of nitrogen-vacancy (NV) centers in diamond is a fascinating candidate for realizing a sensitive magnetic field sensor. In particular, since the axes of the NV centers are distributed along four directions, a collection of measurement data from NV centers with different axes provides information on the vector components of a magnetic field. However, in the conventional approach, the low measurement contrast of NV centers limits the sensitivity of vector magnetic field sensing. Recently, to overcome this problem, multi-frequency control of the NV centers has been proposed. The key idea is that four types of NV centers with different axes are simultaneously controlled by multi-frequency microwave pulses. Here, we demonstrate vector magnetic field sensing with an ensemble of NV centers in diamond via such multi-frequency control with pulsed-type measurements. We use Hahn echo pulses and extract information on the vector components of an applied AC magnetic field. We find that the sensitivity of the vector field sensing with multi-frequency control is better than that with single-frequency control for every vector component of a magnetic field.
Magnetic field fluctuations on nanometer length scales manifest in a diverse range of phenomena -- electron and spin dynamics in materials and devices, quantum many-body systems, and molecular chemistry. Measuring these phenomena requires sensors with a challenging combination of broad spectral bandwidth, high sensitivity, and nanoscale spatial resolution. Nitrogen-vacancy (NV) centers, atom-like quantum sensors in diamond, possess the requisite sensitivity and nanoscale sensing volume, but are typically limited in bandwidth by the practical speed of the applied quantum control sequence. Here, we overcome this limitation by exposing the NV qubit to a microwave dressing field during a dynamical decoupling sequence, which both amplifies and frequency-mixes target signals at arbitrary frequencies into the detection band of the dynamical decoupling protocol. We demonstrate this approach by using NV centers to detect both coherent and noisy nanoscale spin wave dynamics in a magnetic yttrium-iron-garnet (YIG) thin film over a broad frequency range. Our technique generalizes to other qubit platforms, providing a versatile framework for nanoscale spectroscopy across diverse physical and chemical systems.
Microwave (MW) magnetometry utilizing nitrogen-vacancy (NV) centers in diamond offers a broad, tunable detection bandwidth enabled by the magnetic-field-dependent electron spin resonances (ESR) of the NV centers. In this work, we present and experimentally demonstrate two NV-based protocols for spectral analysis of amplitude-modulated (MW) signals. The first protocol employs the NV center as a bandpass filter and reconstructs frequency-domain information of MW signals by sweeping the MW carrier frequency. The second protocol achieves optical imaging of the MW spectrum using an NV-based quantum spectrum analyzer, wherein a magnetic field gradient spatially maps the ESR frequencies of the NV centers, enabling parallel detection of multiple spectral components over a wide instantaneous bandwidth. Both protocols show results that agree well with reference measurements from a classical spectrum analyzer. Our approaches extend the application of spin-based quantum sensors to the field of modern communications and can be adapted for other spin-based quantum sensors.