The well-established technology of the superconducting quantum parametric amplifier (SPA) can be reconfigured to perform functions beyond amplification, such as frequency multiplication, by utilising the low-noise, low-loss superconducting nonlinear transmission line. This versatile technology holds potential for various applications, including ‘pumping’ a millimetre (mm) or sub-mm wave heterodyne mixer or driving a high-frequency SPA. Its significance lies in the ability to incorporate a high-purity signal source into the cryogenic stage alongside the primary detector, thereby eliminating noise associated with room temperature sources. Additionally, there is potential for on-chip integration with the detector circuit, leading to a more compact architecture. This manuscript details the design of a travelling-wave parametric multiplier (TWPaM) that exploits the nonlinear wave-mixing mechanism to enhance the third harmonic growth from a strong pump tone injected into the travelling wave parametric amplifier (TWPA)-like device. While this functionality has been demonstrated previously, it exhibited narrowband performance. In this manuscript, we present our approach to designing a dispersion engineering scheme that enables the generation of broadband tunable tripler tones with high conversion efficiency. We showcase our design methodology using a niobium titanium nitride (NbTiN) high-gap thin-film transmission line as an example. Our presentation includes the theoretical model governing the physics of higher harmonics generation, emphasising phase-matching conditions that allow for broadband operation while suppressing unwanted modes. Although the ultimate aim is to develop a mm/sub-mm TWPaM, we aim to demonstrate the feasibility of their operation with a scaled microwave design in this manuscript. We will show that we can theoretically achieve close to 35% conversion efficiency across approximately 60% operational bandwidth.
The well-established technology of the superconducting quantum parametric amplifier (SPA) can be reconfigured to perform functions beyond amplification, such as frequency multiplication, by utilising the low-noise, low-loss superconducting nonlinear transmission line. This versatile technology holds potential for various applications, including ‘pumping’ a millimetre (mm) or sub-mm wave heterodyne mixer or driving a high-frequency SPA. Its significance lies in the ability to incorporate a high-purity signal source into the cryogenic stage alongside the primary detector, thereby eliminating noise associated with room temperature sources. Additionally, there is potential for on-chip integration with the detector circuit, leading to a more compact architecture. This manuscript details the design of a travelling-wave parametric multiplier (TWPaM) that exploits the nonlinear wave-mixing mechanism to enhance the third harmonic growth from a strong pump tone injected into the travelling wave parametric amplifier (TWPA)-like device. While this functionality has been demonstrated previously, it exhibited narrowband performance. In this manuscript, we present our approach to designing a dispersion engineering scheme that enables the generation of broadband tunable tripler tones with high conversion efficiency. We showcase our design methodology using a niobium titanium nitride (NbTiN) high-gap thin-film transmission line as an example. Our presentation includes the theoretical model governing the physics of higher harmonics generation, emphasising phase-matching conditions that allow for broadband operation while suppressing unwanted modes. Although the ultimate aim is to develop a mm/sub-mm TWPaM, we aim to demonstrate the feasibility of their operation with a scaled microwave design in this manuscript. We will show that we can theoretically achieve close to 35% conversion efficiency across approximately 60% operational bandwidth.
Abstract Superconducting travelling wave parametric amplifiers (TWPAs) exhibit great promise across various applications, owing to their broadband nature, quantum-limited noise performance, and high-gain operation. Whilst their construction is relatively simple, particularly for thin-film-based TWPAs, challenges such as the requirement for an extremely long transmission line, current fabrication limitations, and their sensitivity to fabrication tolerances, mean that their optimal operating conditions often differ from those anticipated during the design stage. As a result, manual fine-tuning of numerous operational parameters becomes necessary to recover optimal performance; a process that is both labour-intensive and time-consuming. This paper introduces an automated methodology designed to significantly accelerate the characterisation of a TWPA by several orders of magnitude without requiring human intervention. Additionally, we have developed metrics to condense the multitude of measured frequency responses of the TWPA, obtained in data cube form, into an easily-understandable format for further scientific interpretation. To demonstrate the efficacy and speed of our methodology, we utilise an existing NbTiN (niobium titanium nitride) TWPA as an example. This showcases the capability of our approach to unveil both broad- and fine-scale behaviours of the device, highlighting the importance of an automated experimental setup for the in-depth investigation of TWPAs for future developments.
Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noiselimited amplifier technology for various fundamental physics platforms, including microwave/millimetre (mm)/sub-mm astronomy, dark matter search experiments, absolute neutrino mass determinations, and qubit readout platforms. To date, only a limited number of successful kinetic inductance (KI-)TWPA devices have been reported, with the majority of them fabricated from niobium titanium nitride (NbTiN) thin films; although in principle, any highly nonlinear low loss superconducting film can be used to construct a KITWPA. In this proceeding, we explore the suitability of using a different type of superconducting film, titanium nitride (TiN) for such application. We report on the detailed analysis of the nonlinear behaviour of TiN films to ascertain the film’s suitability for application as KITWPA. We experimentally characterised TiN transmission lines at cryogenic temperatures to compare the results predicted with electromagnetic simulations. This characterisation and analysis allows us to understand the fundamental physics governing the behaviour of the TiN films, their merits and limitations, and whether they are well suited for applications as KITWPAs.
Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a viable technology for various quantum applications, including fundamental physics experiments such as astronomy and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. In this paper, we present the design of a kinetic inductance TWPA comprising a patterned titanium nitride film that can operate at 0.3K to demonstrate the feasibility of operation closer to 1K temperature, paving the way to achieve even higher bath temperature operation. We discuss in detail the design of our TWPA, along with the predicted gain-bandwidth product and other characteristics. We perform the preliminary experimental investigation of the thin film properties and compare that with the simulated results. We found that there are several discrepancies between the measured and the predicted behaviour of the thin film. We attribute these differences to the fact that the fabricated thin film has a different gap voltage, resistivity and thickness to what we expected. With a new set of estimated parameters, we successfully reproduce the measured transmission profile. We further show that by utilising bridges to ensure equipotential grounds for the CPW lines, we are able to reduce the rippling effect and achieve a higher gain with broader bandwidth. We expect that our TWPA can achieve higher than 20 dB gain from approximately 0–8 GHz.
Superconducting traveling-wave parametric amplifiers (TWPA) have emerged as highly versatile devices, offering broadband amplification with quantum-limited noise performance. They hold significant potential for addressing the readout bottleneck in prototype quantum computers, enabling scalability. Key challenges with this technology include achieving sufficient gain with minimal gain ripple while maintaining low noise performance. Efficient phase matching between a weak signal and a strong pump over the entire length of the TWPA is critical to overcoming these challenges. We present an experimental demonstration of the inverse Kerr phase matching technique in a TWPA, first proposed in Ref. Phys. Rev. Appl. 4, 024014. This method addresses several limitations of conventional dispersion engineering approaches of phase matching in the four-wave mixing parametric process in TWPAs. Most notably the existence of an unusable region of gain near the pump frequency which typically corresponds to the region of most optimal phase matching and maximum gain. The inverse Kerr phase matching approach, allows for greater frequency separation between the region of optimal gain and pump, \textit{in situ} tunability of the pump, minimal gain ripple, and a compact footprint which reduces losses. A TWPA employing the inverse Kerr phase matching technique experimentally demonstrated 20 dB of gain over a 3 GHz instantaneous bandwidth, with a tunable bandwidth of 8 GHz, minimal gain ripple, and near quantum-limited noise performance, with 1.5 photons of added noise.
Travelling wave parametric amplifiers (TWPAs) made from highly non-linear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noise-limited amplifier technology for various fundamental physics platforms, including microwave/mm/sub-mm astronomy, dark matter search experiments, neutrino mass experiments, and qubit readout. We present a kinetic inductance TWPA consisting of a patterned titanium nitride film on a sapphire substrate, which comprises a coplanar waveguide (CPW) with a continuous, smoothed periodic loading (PL) structure that modulates the characteristic impedance of the CPW in a double sinusoidal fashion. This double sinusoidal modulation creates much stronger dispersion features than a conventional PL design, which allows for phase matching and pump harmonic suppression over a much shorter transmission length, potentially leading to reduced losses. In this paper, we shall discuss in detail the design of our TWPA and present the predicted gain-bandwidth characteristics from electromagnetic simulations.
Background Kinetic inductance travelling-wave parametric amplifiers (KITWPAs) have proven effective in achieving high gain over broad bandwidths whilst achieving near quantum-limited noise performance, properties which are extremely important for many ultra-sensitive experiments such as radio/millimetre/sub-millimetre astronomy, neutrino mass experiments, and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. Methods This paper introduces the preliminary experimental exploration of an alternative KITWPA utilising thin titanium nitride (TiN) films as opposed to the conventionally used niobium titanium nitride (NbTiN) films. TiN films exhibit properties that could be advantageous for KITWPA operation, owing to its controllable critical temperature (T c) and physical robustness, hence KITWPAs fabricated from TiN films have the potential to replace NbTiN-based TWPAs for various applications, such as reducing the high pump power required to drive a NbTiN TWPA. Our TiN-based KITWPA devices were designed and fabricated with a 42 cm long coplanar waveguide transmission line patterned into a 100 nm thick TiN film, wound in a double spiral fashion to fit into a 2.2×2.2 cm chip. Results We successfully achieved broadband performance, with the best device displaying a peak averaged gain of ~5 dB with a bandwidth of ~3–13 GHz, making this one of the first broadband gain measurements of a TiN KITWPA reported in the literature. Despite this, the measured gain in all batches was lower than simulated due unexpected additional loss mechanisms. Conclusions The preliminary results presented here suggest that TiN films are suitable for KITWPA operation, although further investigation is required to improve the gain performance.