Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI

A compact kinetic inductance travelling wave parametric amplifier with continuous periodic loading structure

Joseph C. Longden, Christine Chaumont, Faouzi M. Boussaha, Boon-Kok Tan

Published Jul 16, 2022• 0 citations
Publisher

Abstract

Travelling wave parametric amplifiers (TWPAs) made from highly non-linear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noise-limited amplifier technology for various fundamental physics platforms, including microwave/mm/sub-mm astronomy, dark matter search experiments, neutrino mass experiments, and qubit readout. We present a kinetic inductance TWPA consisting of a patterned titanium nitride film on a sapphire substrate, which comprises a coplanar waveguide (CPW) with a continuous, smoothed periodic loading (PL) structure that modulates the characteristic impedance of the CPW in a double sinusoidal fashion. This double sinusoidal modulation creates much stronger dispersion features than a conventional PL design, which allows for phase matching and pump harmonic suppression over a much shorter transmission length, potentially leading to reduced losses. In this paper, we shall discuss in detail the design of our TWPA and present the predicted gain-bandwidth characteristics from electromagnetic simulations.

DOI
10.1117/12.2627037

Related papers

Experimental characterisation of titanium nitride transmission lines for applications as kinetic inductance travelling wave parametric amplifiers

JC Longden, F Boussaha, C Chaumont +2 more

Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noiselimited amplifier technology for various fundamental physics platforms, including microwave/millimetre (mm)/sub-mm astronomy, dark matter search experiments, absolute neutrino mass determinations, and qubit readout platforms. To date, only a limited number of successful kinetic inductance (KI-)TWPA devices have been reported, with the majority of them fabricated from niobium titanium nitride (NbTiN) thin films; although in principle, any highly nonlinear low loss superconducting film can be used to construct a KITWPA. In this proceeding, we explore the suitability of using a different type of superconducting film, titanium nitride (TiN) for such application. We report on the detailed analysis of the nonlinear behaviour of TiN films to ascertain the film’s suitability for application as KITWPA. We experimentally characterised TiN transmission lines at cryogenic temperatures to compare the results predicted with electromagnetic simulations. This characterisation and analysis allows us to understand the fundamental physics governing the behaviour of the TiN films, their merits and limitations, and whether they are well suited for applications as KITWPAs.

•Jan 1, 2023•0 citations

Preliminary characterisation of titanium nitride thin film at 300 mK for the development of kinetic inductance travelling wave parametric amplifiers

Joseph C. Longden, Faouzi M. Boussaha, Christine Chaumont +2 more

Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a viable technology for various quantum applications, including fundamental physics experiments such as astronomy and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. In this paper, we present the design of a kinetic inductance TWPA comprising a patterned titanium nitride film that can operate at 0.3K to demonstrate the feasibility of operation closer to 1K temperature, paving the way to achieve even higher bath temperature operation. We discuss in detail the design of our TWPA, along with the predicted gain-bandwidth product and other characteristics. We perform the preliminary experimental investigation of the thin film properties and compare that with the simulated results. We found that there are several discrepancies between the measured and the predicted behaviour of the thin film. We attribute these differences to the fact that the fabricated thin film has a different gap voltage, resistivity and thickness to what we expected. With a new set of estimated parameters, we successfully reproduce the measured transmission profile. We further show that by utilising bridges to ensure equipotential grounds for the CPW lines, we are able to reduce the rippling effect and achieve a higher gain with broader bandwidth. We expect that our TWPA can achieve higher than 20 dB gain from approximately 0–8 GHz.

Quantum Technology: Driving Commercialisation of an Enabling Science•Oct 6, 2021•4 citations

Preliminary characterisation of titanium nitride kinetic inductance travelling-wave parametric amplifiers

Joseph C. Longden, Christine Chaumont, Nikita S. Klimovich +3 more

Background Kinetic inductance travelling-wave parametric amplifiers (KITWPAs) have proven effective in achieving high gain over broad bandwidths whilst achieving near quantum-limited noise performance, properties which are extremely important for many ultra-sensitive experiments such as radio/millimetre/sub-millimetre astronomy, neutrino mass experiments, and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. Methods This paper introduces the preliminary experimental exploration of an alternative KITWPA utilising thin titanium nitride (TiN) films as opposed to the conventionally used niobium titanium nitride (NbTiN) films. TiN films exhibit properties that could be advantageous for KITWPA operation, owing to its controllable critical temperature (T c) and physical robustness, hence KITWPAs fabricated from TiN films have the potential to replace NbTiN-based TWPAs for various applications, such as reducing the high pump power required to drive a NbTiN TWPA. Our TiN-based KITWPA devices were designed and fabricated with a 42 cm long coplanar waveguide transmission line patterned into a 100 nm thick TiN film, wound in a double spiral fashion to fit into a 2.2×2.2 cm chip. Results We successfully achieved broadband performance, with the best device displaying a peak averaged gain of ~5 dB with a bandwidth of ~3–13 GHz, making this one of the first broadband gain measurements of a TiN KITWPA reported in the literature. Despite this, the measured gain in all batches was lower than simulated due unexpected additional loss mechanisms. Conclusions The preliminary results presented here suggest that TiN films are suitable for KITWPA operation, although further investigation is required to improve the gain performance.

Open Research Europe•Apr 17, 2025•1 citation

Engineering the thin film characteristics for optimal performance of superconducting kinetic inductance amplifiers using a rigorous modelling technique

Boon-Kok Tan, Faouzi M. Boussaha, Christine Chaumont +2 more

Background: Kinetic Inductance Travelling Wave Parametric Amplifiers (KITWPAs) are a variant of superconducting amplifier that can potentially achieve high gain with quantum-limited noise performance over broad bandwidth, which is important for many ultra-sensitive experiments. In this paper, we present a novel modelling technique that can better capture the electromagnetic behaviour of a KITWPA without the translation symmetry assumption, allowing us to flexibly explore the use of more complex transmission line structures and better predict their performance. Methods: In order to design a KITWPA with optimal performance, we investigate the use of different superconducting thin film materials, and compare their pros and cons in forming a high-gain low-loss medium feasible for amplification. We establish that if the film thickness can be controlled precisely, the material used has less impact on the performance of the device, as long as it is topologically defect-free and operating within its superconducting regime. With this insight, we propose the use of Titanium Nitride (TiN) film for our KITWPA as its critical temperature can be easily altered to suit our applications. We further investigate the topological effect of different commonly used superconducting transmission line structures with the TiN film, including the effect of various non-conducting materials required to form the amplifier. Results: Both of these comprehensive studies led us to two configurations of the KITWPA: 1) A low-loss 100 nm thick TiN coplanar waveguide amplifier, and 2) A compact 50 nm TiN inverted microstrip amplifier. We utilise the novel modelling technique described in the first part of the paper to explore and investigate the optimal design and operational setup required to achieve high gain with the broadest bandwidth for both KITWPAs, including the effect of loss. Conclusions: Finally, we conclude the paper with the actual layout and the predicted gain-bandwidth product of our KITWPAs.

Open Research Europe•Jul 19, 2022•9 citations

Traveling Wave Parametric Amplifiers on Strontium Titanate

Connor Denney, Chandler Wilburn, Gabriel Santamaría-Botello

Traveling wave parametric amplifiers (TWPAs) with added noise approaching the quantum limit have enabled highly sensitive microwave frontends for qubit readout, radio astronomy, and particle physics. These amplifiers operate by mixing a strong microwave pump wave with the signal in a nonlinear waveguide, in such a way that a fraction of the pump power is used to amplify the signal and generate a co-propagating idler wave. Conventional TWPAs rely on the inductive nonlinearity originating from the Josephson effect or kinetic inductance in thin super-conductors, restricting these devices to use cases below 4K and nonmagnetic environments. In this work, we propose a C-band TWPA where a capacitive nonlinearity is engineered in transmission lines based on the paraelectric material$\text{SrTiO}_{3}$. The nonlinear properties of$\text{SrTiO}_{3}$remain stable at much higher temperatures (20K) and in high magnetic fields. We have developed a theoretical framework for the optimal geometry of$\text{SrTiO}_{3}$-based nonlinear transmission lines to achieve phase-matched parametric processes while minimizing the required pump power. Periodically loaded coplanar-waveguide (CPW)-like structures on thin-film$\text{SrTiO}_{3}$are simulated to have 20dB of gain over 100mm of interaction, based on empirical nonlinear models of$\text{SrTiO}_{3}$. Alternative methods including slotline geometries and bulk$\text{SrTiO}_{3}$are also simulated. Preliminary measurements of thin-film$\text{SrTiO}_{3}$properties and amplifiers are presented as well as plans to fabricate devices that operate near 500MHz for the Project-8 neutrino mass experiment.

Photonics & Electromagnetics Research Symposium - Fall (PIERS-Fall)•Nov 4, 2025•0 citations

A dispersion-engineered Josephson travelling wave parametric amplifier with periodic impedance perturbation

K Ratter, B-K Tan

We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.

•Jan 1, 2021•0 citations
Travelling wave parametric amplifiers (TWPAs) made from highly non-linear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noise-limited amplifier technology for various fundamental physics platforms, including microwave/mm/sub-mm astronomy, dark matter search experiments, neutrino mass experiments, and qubit readout. We present a kinetic inductance TWPA consisting of a patterned titanium nitride film on a sapphire substrate, which comprises a coplanar waveguide (CPW) with a continuous, smoothed periodic loading (PL) structure that modulates the characteristic impedance of the CPW in a double sinusoidal fashion. This double sinusoidal modulation creates much stronger dispersion features than a conventional PL design, which allows for phase matching and pump harmonic suppression over a much shorter transmission length, potentially leading to reduced losses. In this paper, we shall discuss in detail the design of our TWPA and present the predicted gain-bandwidth characteristics from electromagnetic simulations.
Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noiselimited amplifier technology for various fundamental physics platforms, including microwave/millimetre (mm)/sub-mm astronomy, dark matter search experiments, absolute neutrino mass determinations, and qubit readout platforms. To date, only a limited number of successful kinetic inductance (KI-)TWPA devices have been reported, with the majority of them fabricated from niobium titanium nitride (NbTiN) thin films; although in principle, any highly nonlinear low loss superconducting film can be used to construct a KITWPA. In this proceeding, we explore the suitability of using a different type of superconducting film, titanium nitride (TiN) for such application. We report on the detailed analysis of the nonlinear behaviour of TiN films to ascertain the film’s suitability for application as KITWPA. We experimentally characterised TiN transmission lines at cryogenic temperatures to compare the results predicted with electromagnetic simulations. This characterisation and analysis allows us to understand the fundamental physics governing the behaviour of the TiN films, their merits and limitations, and whether they are well suited for applications as KITWPAs.
Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a viable technology for various quantum applications, including fundamental physics experiments such as astronomy and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. In this paper, we present the design of a kinetic inductance TWPA comprising a patterned titanium nitride film that can operate at 0.3K to demonstrate the feasibility of operation closer to 1K temperature, paving the way to achieve even higher bath temperature operation. We discuss in detail the design of our TWPA, along with the predicted gain-bandwidth product and other characteristics. We perform the preliminary experimental investigation of the thin film properties and compare that with the simulated results. We found that there are several discrepancies between the measured and the predicted behaviour of the thin film. We attribute these differences to the fact that the fabricated thin film has a different gap voltage, resistivity and thickness to what we expected. With a new set of estimated parameters, we successfully reproduce the measured transmission profile. We further show that by utilising bridges to ensure equipotential grounds for the CPW lines, we are able to reduce the rippling effect and achieve a higher gain with broader bandwidth. We expect that our TWPA can achieve higher than 20 dB gain from approximately 0–8 GHz.
Background Kinetic inductance travelling-wave parametric amplifiers (KITWPAs) have proven effective in achieving high gain over broad bandwidths whilst achieving near quantum-limited noise performance, properties which are extremely important for many ultra-sensitive experiments such as radio/millimetre/sub-millimetre astronomy, neutrino mass experiments, and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. Methods This paper introduces the preliminary experimental exploration of an alternative KITWPA utilising thin titanium nitride (TiN) films as opposed to the conventionally used niobium titanium nitride (NbTiN) films. TiN films exhibit properties that could be advantageous for KITWPA operation, owing to its controllable critical temperature (T c) and physical robustness, hence KITWPAs fabricated from TiN films have the potential to replace NbTiN-based TWPAs for various applications, such as reducing the high pump power required to drive a NbTiN TWPA. Our TiN-based KITWPA devices were designed and fabricated with a 42 cm long coplanar waveguide transmission line patterned into a 100 nm thick TiN film, wound in a double spiral fashion to fit into a 2.2×2.2 cm chip. Results We successfully achieved broadband performance, with the best device displaying a peak averaged gain of ~5 dB with a bandwidth of ~3–13 GHz, making this one of the first broadband gain measurements of a TiN KITWPA reported in the literature. Despite this, the measured gain in all batches was lower than simulated due unexpected additional loss mechanisms. Conclusions The preliminary results presented here suggest that TiN films are suitable for KITWPA operation, although further investigation is required to improve the gain performance.
Background: Kinetic Inductance Travelling Wave Parametric Amplifiers (KITWPAs) are a variant of superconducting amplifier that can potentially achieve high gain with quantum-limited noise performance over broad bandwidth, which is important for many ultra-sensitive experiments. In this paper, we present a novel modelling technique that can better capture the electromagnetic behaviour of a KITWPA without the translation symmetry assumption, allowing us to flexibly explore the use of more complex transmission line structures and better predict their performance. Methods: In order to design a KITWPA with optimal performance, we investigate the use of different superconducting thin film materials, and compare their pros and cons in forming a high-gain low-loss medium feasible for amplification. We establish that if the film thickness can be controlled precisely, the material used has less impact on the performance of the device, as long as it is topologically defect-free and operating within its superconducting regime. With this insight, we propose the use of Titanium Nitride (TiN) film for our KITWPA as its critical temperature can be easily altered to suit our applications. We further investigate the topological effect of different commonly used superconducting transmission line structures with the TiN film, including the effect of various non-conducting materials required to form the amplifier. Results: Both of these comprehensive studies led us to two configurations of the KITWPA: 1) A low-loss 100 nm thick TiN coplanar waveguide amplifier, and 2) A compact 50 nm TiN inverted microstrip amplifier. We utilise the novel modelling technique described in the first part of the paper to explore and investigate the optimal design and operational setup required to achieve high gain with the broadest bandwidth for both KITWPAs, including the effect of loss. Conclusions: Finally, we conclude the paper with the actual layout and the predicted gain-bandwidth product of our KITWPAs.
Traveling wave parametric amplifiers (TWPAs) with added noise approaching the quantum limit have enabled highly sensitive microwave frontends for qubit readout, radio astronomy, and particle physics. These amplifiers operate by mixing a strong microwave pump wave with the signal in a nonlinear waveguide, in such a way that a fraction of the pump power is used to amplify the signal and generate a co-propagating idler wave. Conventional TWPAs rely on the inductive nonlinearity originating from the Josephson effect or kinetic inductance in thin super-conductors, restricting these devices to use cases below 4K and nonmagnetic environments. In this work, we propose a C-band TWPA where a capacitive nonlinearity is engineered in transmission lines based on the paraelectric materialSrTiO3\text{SrTiO}_{3}SrTiO3​. The nonlinear properties ofSrTiO3\text{SrTiO}_{3}SrTiO3​remain stable at much higher temperatures (20K) and in high magnetic fields. We have developed a theoretical framework for the optimal geometry ofSrTiO3\text{SrTiO}_{3}SrTiO3​-based nonlinear transmission lines to achieve phase-matched parametric processes while minimizing the required pump power. Periodically loaded coplanar-waveguide (CPW)-like structures on thin-filmSrTiO3\text{SrTiO}_{3}SrTiO3​are simulated to have 20dB of gain over 100mm of interaction, based on empirical nonlinear models ofSrTiO3\text{SrTiO}_{3}SrTiO3​. Alternative methods including slotline geometries and bulkSrTiO3\text{SrTiO}_{3}SrTiO3​are also simulated. Preliminary measurements of thin-filmSrTiO3\text{SrTiO}_{3}SrTiO3​properties and amplifiers are presented as well as plans to fabricate devices that operate near 500MHz for the Project-8 neutrino mass experiment.
We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.