Abstract Superconducting travelling wave parametric amplifiers (TWPAs) exhibit great promise across various applications, owing to their broadband nature, quantum-limited noise performance, and high-gain operation. Whilst their construction is relatively simple, particularly for thin-film-based TWPAs, challenges such as the requirement for an extremely long transmission line, current fabrication limitations, and their sensitivity to fabrication tolerances, mean that their optimal operating conditions often differ from those anticipated during the design stage. As a result, manual fine-tuning of numerous operational parameters becomes necessary to recover optimal performance; a process that is both labour-intensive and time-consuming. This paper introduces an automated methodology designed to significantly accelerate the characterisation of a TWPA by several orders of magnitude without requiring human intervention. Additionally, we have developed metrics to condense the multitude of measured frequency responses of the TWPA, obtained in data cube form, into an easily-understandable format for further scientific interpretation. To demonstrate the efficacy and speed of our methodology, we utilise an existing NbTiN (niobium titanium nitride) TWPA as an example. This showcases the capability of our approach to unveil both broad- and fine-scale behaviours of the device, highlighting the importance of an automated experimental setup for the in-depth investigation of TWPAs for future developments.
Abstract Superconducting travelling wave parametric amplifiers (TWPAs) exhibit great promise across various applications, owing to their broadband nature, quantum-limited noise performance, and high-gain operation. Whilst their construction is relatively simple, particularly for thin-film-based TWPAs, challenges such as the requirement for an extremely long transmission line, current fabrication limitations, and their sensitivity to fabrication tolerances, mean that their optimal operating conditions often differ from those anticipated during the design stage. As a result, manual fine-tuning of numerous operational parameters becomes necessary to recover optimal performance; a process that is both labour-intensive and time-consuming. This paper introduces an automated methodology designed to significantly accelerate the characterisation of a TWPA by several orders of magnitude without requiring human intervention. Additionally, we have developed metrics to condense the multitude of measured frequency responses of the TWPA, obtained in data cube form, into an easily-understandable format for further scientific interpretation. To demonstrate the efficacy and speed of our methodology, we utilise an existing NbTiN (niobium titanium nitride) TWPA as an example. This showcases the capability of our approach to unveil both broad- and fine-scale behaviours of the device, highlighting the importance of an automated experimental setup for the in-depth investigation of TWPAs for future developments.
Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noiselimited amplifier technology for various fundamental physics platforms, including microwave/millimetre (mm)/sub-mm astronomy, dark matter search experiments, absolute neutrino mass determinations, and qubit readout platforms. To date, only a limited number of successful kinetic inductance (KI-)TWPA devices have been reported, with the majority of them fabricated from niobium titanium nitride (NbTiN) thin films; although in principle, any highly nonlinear low loss superconducting film can be used to construct a KITWPA. In this proceeding, we explore the suitability of using a different type of superconducting film, titanium nitride (TiN) for such application. We report on the detailed analysis of the nonlinear behaviour of TiN films to ascertain the film’s suitability for application as KITWPA. We experimentally characterised TiN transmission lines at cryogenic temperatures to compare the results predicted with electromagnetic simulations. This characterisation and analysis allows us to understand the fundamental physics governing the behaviour of the TiN films, their merits and limitations, and whether they are well suited for applications as KITWPAs.
Background Kinetic inductance travelling-wave parametric amplifiers (KITWPAs) have proven effective in achieving high gain over broad bandwidths whilst achieving near quantum-limited noise performance, properties which are extremely important for many ultra-sensitive experiments such as radio/millimetre/sub-millimetre astronomy, neutrino mass experiments, and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. Methods This paper introduces the preliminary experimental exploration of an alternative KITWPA utilising thin titanium nitride (TiN) films as opposed to the conventionally used niobium titanium nitride (NbTiN) films. TiN films exhibit properties that could be advantageous for KITWPA operation, owing to its controllable critical temperature (T c) and physical robustness, hence KITWPAs fabricated from TiN films have the potential to replace NbTiN-based TWPAs for various applications, such as reducing the high pump power required to drive a NbTiN TWPA. Our TiN-based KITWPA devices were designed and fabricated with a 42 cm long coplanar waveguide transmission line patterned into a 100 nm thick TiN film, wound in a double spiral fashion to fit into a 2.2×2.2 cm chip. Results We successfully achieved broadband performance, with the best device displaying a peak averaged gain of ~5 dB with a bandwidth of ~3–13 GHz, making this one of the first broadband gain measurements of a TiN KITWPA reported in the literature. Despite this, the measured gain in all batches was lower than simulated due unexpected additional loss mechanisms. Conclusions The preliminary results presented here suggest that TiN films are suitable for KITWPA operation, although further investigation is required to improve the gain performance.
The well-established technology of the superconducting quantum parametric amplifier (SPA) can be reconfigured to perform functions beyond amplification, such as frequency multiplication, by utilising the low-noise, low-loss superconducting nonlinear transmission line. This versatile technology holds potential for various applications, including ‘pumping’ a millimetre (mm) or sub-mm wave heterodyne mixer or driving a high-frequency SPA. Its significance lies in the ability to incorporate a high-purity signal source into the cryogenic stage alongside the primary detector, thereby eliminating noise associated with room temperature sources. Additionally, there is potential for on-chip integration with the detector circuit, leading to a more compact architecture. This manuscript details the design of a travelling-wave parametric multiplier (TWPaM) that exploits the nonlinear wave-mixing mechanism to enhance the third harmonic growth from a strong pump tone injected into the travelling wave parametric amplifier (TWPA)-like device. While this functionality has been demonstrated previously, it exhibited narrowband performance. In this manuscript, we present our approach to designing a dispersion engineering scheme that enables the generation of broadband tunable tripler tones with high conversion efficiency. We showcase our design methodology using a niobium titanium nitride (NbTiN) high-gap thin-film transmission line as an example. Our presentation includes the theoretical model governing the physics of higher harmonics generation, emphasising phase-matching conditions that allow for broadband operation while suppressing unwanted modes. Although the ultimate aim is to develop a mm/sub-mm TWPaM, we aim to demonstrate the feasibility of their operation with a scaled microwave design in this manuscript. We will show that we can theoretically achieve close to 35% conversion efficiency across approximately 60% operational bandwidth.
Abstract The underlying nonlinear mechanisms behind the operation of travelling-wave parametric amplifiers (TWPAs) are important in determining their performance in terms of added noise, maximum gain, and bandwidth. We describe a method of characterising the underlying nonlinearity of a superconducting material in terms of its dissipative-reactive ratio and the response time of the underlying microscopic processes. We describe and calculate the different behaviour arising from the equilibrium supercurrent nonlinearity, which has low dissipation and fast response time, and the non-equilibrium heating nonlinearity, which has high dissipation and slow response time. We have fabricated TWPAs based on Al and Ti, and characterised their nonlinearities using our analysis. For both Al and Ti, the measured dissipative-reactive ratios and response times are quantitatively similar to predictions for the non-equilibrium heating nonlinearity. We were able to obtain more than 20 d B of peak power gain, although only over a narrow bandwidth of a few kilohertz. Our method of characterising the underlying nonlinearities could also be useful in the understanding and design of other superconducting nonlinear devices such as parametric up-converters, kinetic inductance Fourier transform spectrometers, and resonator parametric amplifiers.
Abstract Superconducting travelling-wave parametric amplifiers (TWPAs) play a vital role in a range of high-sensitivity applications. These devices can be realised using various superconducting materials, such as high kinetic inductance films or low-loss transmission lines embedded with discrete nonlinear elements like Josephson junctions (JJs) or superconducting quantum interference devices (SQUIDs), and can operate across different wave-mixing regimes. However, a unifying framework for quick assessment and thus efficiently evaluating the performance of these diverse TWPA architectures, particularly during the design phase, remains lacking. Most existing models are derived from first principles for specific TWPA designs and lack general applicability. While certain simulation program with integrated circuit emphasis (SPICE) tools can more accurately emulate TWPA behaviour post-design, they are typically computationally intensive, time-consuming, and offer limited physical insight; especially regarding key performance-determining factors such as phase matching. This, in turn, impedes the rapid identification of optimal TWPA configurations. In this work, we extend a previously introduced framework for kinetic-inductance (KI-) TWPAs and demonstrate its applicability to a broader class of χ ( 3 ) -type TWPA configurations, including bare JJ (JTWPA) and symmetric SQUID-based TWPAs, operating in all wave-mixing modes. This approach facilitates rapid design-space exploration prior to detailed optimisation using SPICE-based simulations. Our method accommodates a wide range of unit cell topologies and meta-material parameters without requiring ground-up derivations from first principles. We validate the framework by comparing it against representative models from the literature, including JJ-, KI-, and DC SQUID-based TWPA designs, and show that it reliably captures the first-order behaviour of their gain–bandwidth characteristics.
Traveling wave parametric amplifiers (TWPAs) offer the most promising solution for high gain, broadband, and quantum noise limited amplification at microwave frequencies. Experimental realization of TWPAs has proved challenging with often major discrepancies between the theoretically predicted and the measured gain performance of the devices. Here, we extend the conventional modeling techniques to account for spatial variation in the surface impedance of the thin film and the parametric sum-frequency conversions effect, which subsequently results in accurate reproduction of experimental device behavior. We further show that such an analysis may be critical to ensure fabricated TWPAs can operate as designed.