Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference digest

Josephson parametric amplifiers for rapid, high-fidelity measurement of solid-state qubits

Shyam Shankar, Z. Hao, Mehdi Hatefipour, William L. Strickland, T. Shaw, Javad Shabani

Published Jun 25, 2023• 2 citations
Publisher

Abstract

Superconducting quantum circuits are a leading platform for building a large-scale quantum processor [1]. A crucial component necessary for the high-fidelity readout of qubits in this framework, is an ultra-low-noise microwave amplifier. Thus, over the past two decades, superconducting Josephson parametric amplifiers (JPAs) have been developed that achieve near quantum-limited noise performance, an order of magnitude lower than competing microwave amplifiers based on semiconductor transistors [2]. Nevertheless, JPAs suffer from drawbacks such as limited bandwidth and compression power that makes them difficult to use in an eventual large-scale quantum processor. Thus, an ongoing theme in JPA development is to optimize the circuit to improve these specifications without sacrificing other desirable properties such as the noise performance, ease of construction and operation, etc. Here, we review some results of optimizing a specific JPA circuit called the SNAIL parametric amplifier [3]–[5], shown in Fig. 1, where the acronym SNAIL refers to the Superconducting Nonlinear Asymmetric Inductive eLement. The SNAIL is a composite element made from conventional Al/AlOx/Al Josephson junctions, which has a nonlinear current-phase relation that can be approximated as a nonlinear inductance. By applying a strong microwave frequency pump to modulate the nonlinear inductance, parametric amplification can be realized. By device and circuit engineering we have demonstrated two orders of magnitude improvement in compression power (Fig. 2) in such devices without sacrificing other desirable characteristics.

DOI
10.1109/drc58590.2023.10186961

Related papers

Optimizing the Nonlinearity and Dissipation of a SNAIL Parametric Amplifier for Dynamic Range

N. E. Frattini, Volodymyr Sivak, Andrew Lingenfelter +2 more

Quantum-limited Josephson parametric amplifiers are a key component in many precision microwave measurement setups, such as for the readout of superconducting qubits in a quantum computer. As qubit setups scale up, these amplifiers must be optimized to handle input signals of ever-larger power. The authors design a quantum-limited parametric amplifier based on an array of superconducting nonlinear asymmetric inductive elements. This ``SNAIL'' is optimized to handle large input signals without sacrificing other desirable characteristics. The method can be extended to improve all forms of parametrically induced mixing in quantum information applications.

arXiv:1806.06093•Physical Review Applied•Nov 8, 2018•184 citations

Al-InAs Superconductor-Semiconductor Josephson Junction Parametric Amplifier

Z. Hao, T. Shaw, Mehdi Hatefipour +5 more

Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.

Conference digest•Jun 24, 2024•0 citations

Broadband SNAIL parametric amplifier with microstrip impedance transformer

Daria A. Moskaleva, Dmitry O. Moskalev, Nikita S. Smirnov +8 more

Josephson parametric amplifiers are an important part of a modern superconducting quantum computing platform and squeezed quantum states generation devices. Traveling wave and impedance-matched parametric amplifiers provide broad bandwidth for high-fidelity single-shot readout of multiple qubit superconducting circuits. Here, we present a quantum-limited 3-wave-mixing parametric amplifier based on superconducting nonlinear asymmetric inductive elements (SNAILs), whose useful bandwidth is enhanced with an on-chip two-section impedance-matching circuit based on microstrip transmission lines. The amplifier dynamic range is increased using an array of 67 SNAILs with 268 Josephson junctions, forming a nonlinear quarter-wave resonator. Operating in a current-pumped mode, we experimentally demonstrate an average gain of 17 dB across 300 MHz bandwidth, along with an average saturation power of –100 dBm, which can go as high as −97 dBm with quantum-limited noise performance. Moreover, the amplifier can be fabricated using a simple technology with just one e-beam lithography step.

arXiv:2210.15334•Applied Physics Letters•Dec 5, 2022•26 citations

Josephson parametric amplifiers for rapid, high-fidelity measurement of solid-state qubits

Shyam Shankar, Z. Hao, William M. Strickland +3 more

Josephson parametric amplifiers (JPAs) are crucial devices for readout of solid-state qubits. We review how to optimize the compression power and bandwidth of JPAs, necessary for realizing large-scale quantum information processors. We also discuss recent work to realize JPAs with a Josephson Junction Field Effect Transistor made from InAs-Al heterostructures.

Technical digest - International Electron Devices Meeting/Technical digest•Dec 3, 2022•1 citation

Kerr nonlinearity and parametric amplification with an Al-InAs superconductor–semiconductor Josephson junction

Z. Hao, T. Shaw, Mehdi Hatefipour +5 more

Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.

arXiv:2402.11085•Applied Physics Letters•Jun 17, 2024•14 citations

Performance optimization of cascaded traveling wave Josephson parametric amplifiers

Ilari Lilja, Ekaterina Mukhanova, Stanislav Khaldeev +3 more

Traveling-wave parametric amplifiers (TWPAs) based on Josephson metamaterials provide broadband gain with near-quantum-limited added noise. Whereas long nonlinear metamaterial devices can deliver high gain, short arrays suffer less from dissipation, pump depletion, and internal standing waves which can degrade noise performance. Here, we demonstrate a cascaded TWPA architecture that combines the advantages of both approaches by employing a short (736-element), low-dissipation Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL)-based TWPA as the first amplification stage, followed by a conventional long (1632-element) TWPA that provides additional gain. The resulting amplifier cascade achieves nearly 30 dB of total gain over a tunable bandwidth of approximately 1 GHz while maintaining added noise close to the quantum limit. Our results establish a cascade of TWPAs as a practical approach for high-gain, broadband, quantum amplification with applications in quantum information processing, multi-mode entanglement, and quantum sensing applications at microwave frequencies.

quant-pharXiv:2609.23126•Sep 22, 2026•0 citations
Superconducting quantum circuits are a leading platform for building a large-scale quantum processor [1]. A crucial component necessary for the high-fidelity readout of qubits in this framework, is an ultra-low-noise microwave amplifier. Thus, over the past two decades, superconducting Josephson parametric amplifiers (JPAs) have been developed that achieve near quantum-limited noise performance, an order of magnitude lower than competing microwave amplifiers based on semiconductor transistors [2]. Nevertheless, JPAs suffer from drawbacks such as limited bandwidth and compression power that makes them difficult to use in an eventual large-scale quantum processor. Thus, an ongoing theme in JPA development is to optimize the circuit to improve these specifications without sacrificing other desirable properties such as the noise performance, ease of construction and operation, etc. Here, we review some results of optimizing a specific JPA circuit called the SNAIL parametric amplifier [3]–[5], shown in Fig. 1, where the acronym SNAIL refers to the Superconducting Nonlinear Asymmetric Inductive eLement. The SNAIL is a composite element made from conventional Al/AlOx/Al Josephson junctions, which has a nonlinear current-phase relation that can be approximated as a nonlinear inductance. By applying a strong microwave frequency pump to modulate the nonlinear inductance, parametric amplification can be realized. By device and circuit engineering we have demonstrated two orders of magnitude improvement in compression power (Fig. 2) in such devices without sacrificing other desirable characteristics.
Quantum-limited Josephson parametric amplifiers are a key component in many precision microwave measurement setups, such as for the readout of superconducting qubits in a quantum computer. As qubit setups scale up, these amplifiers must be optimized to handle input signals of ever-larger power. The authors design a quantum-limited parametric amplifier based on an array of superconducting nonlinear asymmetric inductive elements. This ``SNAIL'' is optimized to handle large input signals without sacrificing other desirable characteristics. The method can be extended to improve all forms of parametrically induced mixing in quantum information applications.
Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.
Josephson parametric amplifiers are an important part of a modern superconducting quantum computing platform and squeezed quantum states generation devices. Traveling wave and impedance-matched parametric amplifiers provide broad bandwidth for high-fidelity single-shot readout of multiple qubit superconducting circuits. Here, we present a quantum-limited 3-wave-mixing parametric amplifier based on superconducting nonlinear asymmetric inductive elements (SNAILs), whose useful bandwidth is enhanced with an on-chip two-section impedance-matching circuit based on microstrip transmission lines. The amplifier dynamic range is increased using an array of 67 SNAILs with 268 Josephson junctions, forming a nonlinear quarter-wave resonator. Operating in a current-pumped mode, we experimentally demonstrate an average gain of 17 dB across 300 MHz bandwidth, along with an average saturation power of –100 dBm, which can go as high as −97 dBm with quantum-limited noise performance. Moreover, the amplifier can be fabricated using a simple technology with just one e-beam lithography step.
Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.
Traveling-wave parametric amplifiers (TWPAs) based on Josephson metamaterials provide broadband gain with near-quantum-limited added noise. Whereas long nonlinear metamaterial devices can deliver high gain, short arrays suffer less from dissipation, pump depletion, and internal standing waves which can degrade noise performance. Here, we demonstrate a cascaded TWPA architecture that combines the advantages of both approaches by employing a short (736-element), low-dissipation Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL)-based TWPA as the first amplification stage, followed by a conventional long (1632-element) TWPA that provides additional gain. The resulting amplifier cascade achieves nearly 30 dB of total gain over a tunable bandwidth of approximately 1 GHz while maintaining added noise close to the quantum limit. Our results establish a cascade of TWPAs as a practical approach for high-gain, broadband, quantum amplification with applications in quantum information processing, multi-mode entanglement, and quantum sensing applications at microwave frequencies.