arXiv:2609.23126
Performance optimization of cascaded traveling wave Josephson parametric amplifiers
Ilari Lilja, Ekaterina Mukhanova, Stanislav Khaldeev, Ilya Golokolenov, Visa Vesterinen, Pertti Hakonen
Abstract
Traveling-wave parametric amplifiers (TWPAs) based on Josephson metamaterials provide broadband gain with near-quantum-limited added noise. Whereas long nonlinear metamaterial devices can deliver high gain, short arrays suffer less from dissipation, pump depletion, and internal standing waves which can degrade noise performance. Here, we demonstrate a cascaded TWPA architecture that combines the advantages of both approaches by employing a short (736-element), low-dissipation Superconducting Nonlinear Asymmetric Inductive eLement (SNAIL)-based TWPA as the first amplification stage, followed by a conventional long (1632-element) TWPA that provides additional gain. The resulting amplifier cascade achieves nearly 30 dB of total gain over a tunable bandwidth of approximately 1 GHz while maintaining added noise close to the quantum limit. Our results establish a cascade of TWPAs as a practical approach for high-gain, broadband, quantum amplification with applications in quantum information processing, multi-mode entanglement, and quantum sensing applications at microwave frequencies.
AI Summary
The paper investigates whether cascading a short, low-loss Josephson traveling-wave parametric amplifier (TWPA) with a longer, higher-gain TWPA can combine low added noise with enough gain to suppress downstream amplifier noise. The experiment uses SNAIL arrays containing 736 and 1632 elements, respectively, with independently controlled pumps near 11 and 9.4 GHz. A 5–6 GHz interstage bandpass filter restricts amplified broadband noise reaching the second stage and rejects unwanted pump and idler components. Pump placement keeps the second-stage idler band outside the filter passband; an additional circulator mitigates impedance-mismatch-induced gain ripples. The cascade provides approximately 30 dB gain over a reported tunable bandwidth of roughly 1 GHz. Detailed measurements over 5.25–5.65 GHz show first- and second-stage gains of $12\pm2$ and $17\pm3$ dB, with simultaneous gain agreeing with their sum within 0.1 dB on average. The input-referred 1 dB compression point is approximately $-101$ dBm. Noise is established by temperature-dependent Y-factor calibration of the downstream chain, followed by gain and signal-to-noise-ratio measurements with the first stage switched on and off. The extracted first-stage added noise approaches the half-quantum limit; the second stage contributes a reported mean 115 mK input-referred noise. Limitations include residual gain ripples, non-negligible second-stage noise, and compression from amplified broadband noise when first-stage gain is increased toward 15 dB. Simultaneous pumping can also change impedance, phase matching, or bias, complicating interpretation of gain differences.
Central claim may not hold: The supplied results explicitly quantify gain over 400 MHz and do not establish simultaneous nearly 30 dB gain and near-quantum-limited noise throughout the claimed approximately 1 GHz bandwidth. The abstract describes a tunable bandwidth, but the paper does not report a tuning range or performance measurements at multiple tuned bands. The Background's approximately half-quantum added-noise claim for the cascade neglects the non-negligible downstream contribution, reported as 115 mK on average, whereas the half-quantum result is inferred for the first TWPA.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 16 pages, 3 figures