Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Express

Compact and portable quantum sensor module using diamond NV centers

Hiroshige Deguchi, Tsukasa Hayashi, Hiroya Saito, Yoshiki Nishibayashi, Minori Teramoto, Masanori Fujiwara, Hiroki Morishita, Norikazu Mizuochi, Natsuo Tatsumi

Published May 23, 2023• 15 citations
Publisher

Abstract

Abstract We developed a compact and portable measuring instrument using diamond NV centers that operates on the USB 3.0 power supply of a laptop computer. Its portability is achieved by the low power consumption of the optics, realized by the diamond corner cube that enhanced the current of the photodiode to 2.1 times higher than that of the planar diamond, and that of the microwave source, reduced by 20 dB, which was realized by a microwave resonator using a λ/4 open stub that strongly magnetically drives the NV center. These results contribute to the social implementation of diamond sensors.

DOI
10.35848/1882-0786/acd836

Related papers

Compact and portable pulsed measurement module using diamond NV centers

Hiroshige Deguchi, Tsukasa Hayashi, Hiroya Saito +6 more

Abstract We developed a compact, portable quantum sensor module for pulsed measurements using diamond nitrogen-vacancy (NV) centers, an excitation laser diode of 3 mW and a microwave source of 15 dBm. This module allowed the evaluation of ensemble diamond NV centers for measuring magnetic fields by continuous wave— optically detected magnetic resonance (ODMR), Rabi oscillation, pulsed ODMR, Ramsey measurement and spin-echo measurement. The sensitivity through pulsed measurements reached 40 nT/ Hz at 1 Hz, which achieved higher sensitivity by one order, especially at a frequency around 1 Hz compared with previously reported compact modules using diamond NV centers.

Japanese Journal of Applied Physics•Jun 27, 2025•2 citations

Highly sensitive diamond quantum sensor with large sensor volume toward magnetoencephalography

雄太 増山, Takayuki Iwasaki, 睦子 波多野 +4 more

Nitrogen-vacancy (NV) color centers in diamond are promising solid-state quantum sensors working at room temperature. The number of NV centers limits the magnetic sensitivity of the quantum magnetometer. Increasing the number of NV centers is a challenging task due to technical issues such as microwave power density, detection noise.Here, we developed the sensor system with a large detection volume which contains a lot of NV centers. The microwave circuit enhances microwave power density. Digital filter with frequency modulation of microwave allows us to detect the magnetic field with low noise. Consequently, we obtained a DC magnetic field sensitivity of 980 pT/√Hz.This work was supported by MEXT Quantum Leap Flagship Program (MEXT Q-LEAP) Grant Number JPMXS0118067395.

•Dec 4, 2019•0 citations

Wideband microwave resonator for NV center vector magnetometry

S. V. Bolshedvorskii, E. A. Koreshin, V. V. Soshenko +10 more

The nitrogen-vacancy (NV) color center in diamond has found applications in magnetometry across various geometrical scales. In particular, vector magnetometry using hand-held devices with low power consumption is of interest for mobile and geological applications. However, such a device requires efficient driving of the four different orientations of the NV center, thus placing demands on a broadband microwave resonator that provides a uniform and highly insensitive microwave magnetic field at the resonance frequencies of the NV centers. Here, we propose a unique planar resonator design that enables efficient driving of all four orientations of NV color centers over a 100 MHz range with only 0.5 W of microwave input power and 250 mW of laser power, allowing vector magnetic field measurements. Using the planar resonator to drive NV centers in diamond, a compact vector magnetometer was fabricated and experimentally studied. The sensitivity of the device is about \[{1.2\text{ nT}}/{\sqrt{\text{Hz}}}\;\]. While this is not a record sensitivity for diamond-based magnetometers, this device occupies its own niche as a compact hand-held magnetometer.

quant-pharXiv:2610.13379•Oct 12, 2026

Fiber-integrated diamond optomechanical crystal with embedded NV centers

K. Sato, H. Kurokawa, S. Ishida +10 more

For the realization of all-optical readout, scalable superconducting quantum computers, a quantum transducers with low noise, high efficiency, and ultra-low power consumption is essential. However, systems meeting all these requirements remain under development. Our group is focusing on implementing ultra-low power quantum transducers that utilize interactions between single microwave and optical photons and a color centers in a diamond optomechanical resonators.

•Jul 30, 2025•0 citations

Hands-on quantum sensing with NV centers in diamond

J. L. Sánchez Toural, Victor Marzoa, Ramón Bernardo Gavito +2 more

The physical properties of diamond crystals, such as color or electrical conductivity, can be controlled via impurities.In particular, when doped with nitrogen and under certain conditions, optically active nitrogen-vacany centers (NV) can be induced.The center is an outstanding quantum spin system that enables, under ambient conditions, optical initialization, readout, and coherent microwave control with applications in sensing and quantum information.Under optical and radio frequency excitation, the Zeeman splitting of the degenerate states allows the quantitative measurement of external magnetic fields with high sensitivity.This study provides a pedagogical introduction to the properties of the NV centers as well as a step-by-step process to develop and test, a simple magnetic quantum sensor based on color centers with large potential for the development of highly compact multi-sensor systems.

•Sep 12, 2022•0 citations

Development of Integrated, LED-Based Quantum Sensors Based on NV-Centers in Diamond

Pogorzelski, Jens

This dissertation presents the development and characterization of fully integrated quantum sensors based on nitrogen vacancy (NV) centers in diamond. While existing NV-based sensors are typically large and complex, this work focuses on miniaturizing the technology and demonstrating its application as a current sensor. The primary research question addressed is whether fully integrated NVbased quantum sensors with LED excitation can be realized with performance comparable to conventional sensor technologies. To this end, two sensor prototypes were developed: one as the smallest fully integrated NV quantum sensor with a complete electrical interface to date, achieving a sensitivity of 32 nT/ √ Hz; and another as the first NV-based sensor implemented on a flexible PCB, which is even smaller and achieves a sensitivity of 96 nT/ √ Hz. Thereby both sensors utilize randomly oriented diamond microcrystals. Methodologically, a novel procedure for determining the orientation of the diamond crystals was developed, allowing for effective signal extraction despite the random crystal orientation. Further, magnetic fields were simulated using COMSOL Multiphysics to investigate the feasibility of applying these sensors for current measurements. In this context, a new measurement concept for determining currents in segmented multi-wire cables of three-phase power grids was developed, demonstrating the potential of NV-based sensors in smart grid applications. The results indicate that these quantum sensors can be more easily integrated, even when diamonds are placed arbitrarily, thus paving the way for new applications in smart grid monitoring and other fields requiring compact, high-precision magnetic field sensors.

•Jan 1, 2025•0 citations
Abstract We developed a compact and portable measuring instrument using diamond NV centers that operates on the USB 3.0 power supply of a laptop computer. Its portability is achieved by the low power consumption of the optics, realized by the diamond corner cube that enhanced the current of the photodiode to 2.1 times higher than that of the planar diamond, and that of the microwave source, reduced by 20 dB, which was realized by a microwave resonator using a λ/4 open stub that strongly magnetically drives the NV center. These results contribute to the social implementation of diamond sensors.
Abstract We developed a compact, portable quantum sensor module for pulsed measurements using diamond nitrogen-vacancy (NV) centers, an excitation laser diode of 3 mW and a microwave source of 15 dBm. This module allowed the evaluation of ensemble diamond NV centers for measuring magnetic fields by continuous wave— optically detected magnetic resonance (ODMR), Rabi oscillation, pulsed ODMR, Ramsey measurement and spin-echo measurement. The sensitivity through pulsed measurements reached 40 nT/ Hz at 1 Hz, which achieved higher sensitivity by one order, especially at a frequency around 1 Hz compared with previously reported compact modules using diamond NV centers.
Nitrogen-vacancy (NV) color centers in diamond are promising solid-state quantum sensors working at room temperature. The number of NV centers limits the magnetic sensitivity of the quantum magnetometer. Increasing the number of NV centers is a challenging task due to technical issues such as microwave power density, detection noise.Here, we developed the sensor system with a large detection volume which contains a lot of NV centers. The microwave circuit enhances microwave power density. Digital filter with frequency modulation of microwave allows us to detect the magnetic field with low noise. Consequently, we obtained a DC magnetic field sensitivity of 980 pT/√Hz.This work was supported by MEXT Quantum Leap Flagship Program (MEXT Q-LEAP) Grant Number JPMXS0118067395.
The nitrogen-vacancy (NV) color center in diamond has found applications in magnetometry across various geometrical scales. In particular, vector magnetometry using hand-held devices with low power consumption is of interest for mobile and geological applications. However, such a device requires efficient driving of the four different orientations of the NV center, thus placing demands on a broadband microwave resonator that provides a uniform and highly insensitive microwave magnetic field at the resonance frequencies of the NV centers. Here, we propose a unique planar resonator design that enables efficient driving of all four orientations of NV color centers over a 100 MHz range with only 0.5 W of microwave input power and 250 mW of laser power, allowing vector magnetic field measurements. Using the planar resonator to drive NV centers in diamond, a compact vector magnetometer was fabricated and experimentally studied. The sensitivity of the device is about 1.2 nT/Hz  {1.2\text{ nT}}/{\sqrt{\text{Hz}}}\;1.2 nT/Hz​. While this is not a record sensitivity for diamond-based magnetometers, this device occupies its own niche as a compact hand-held magnetometer.
The physical properties of diamond crystals, such as color or electrical conductivity, can be controlled via impurities.In particular, when doped with nitrogen and under certain conditions, optically active nitrogen-vacany centers (NV) can be induced.The center is an outstanding quantum spin system that enables, under ambient conditions, optical initialization, readout, and coherent microwave control with applications in sensing and quantum information.Under optical and radio frequency excitation, the Zeeman splitting of the degenerate states allows the quantitative measurement of external magnetic fields with high sensitivity.This study provides a pedagogical introduction to the properties of the NV centers as well as a step-by-step process to develop and test, a simple magnetic quantum sensor based on color centers with large potential for the development of highly compact multi-sensor systems.
This dissertation presents the development and characterization of fully integrated quantum sensors based on nitrogen vacancy (NV) centers in diamond. While existing NV-based sensors are typically large and complex, this work focuses on miniaturizing the technology and demonstrating its application as a current sensor. The primary research question addressed is whether fully integrated NVbased quantum sensors with LED excitation can be realized with performance comparable to conventional sensor technologies. To this end, two sensor prototypes were developed: one as the smallest fully integrated NV quantum sensor with a complete electrical interface to date, achieving a sensitivity of 32 nT/ √ Hz; and another as the first NV-based sensor implemented on a flexible PCB, which is even smaller and achieves a sensitivity of 96 nT/ √ Hz. Thereby both sensors utilize randomly oriented diamond microcrystals. Methodologically, a novel procedure for determining the orientation of the diamond crystals was developed, allowing for effective signal extraction despite the random crystal orientation. Further, magnetic fields were simulated using COMSOL Multiphysics to investigate the feasibility of applying these sensors for current measurements. In this context, a new measurement concept for determining currents in segmented multi-wire cables of three-phase power grids was developed, demonstrating the potential of NV-based sensors in smart grid applications. The results indicate that these quantum sensors can be more easily integrated, even when diamonds are placed arbitrarily, thus paving the way for new applications in smart grid monitoring and other fields requiring compact, high-precision magnetic field sensors.