Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

A flux-tunable YBa2Cu3O7 quantum interference microwave circuit

Kevin Uhl, Daniel Hackenbeck, Christoph Füger, R. Kleiner, D. Koelle, Daniel Bothner

Published May 1, 2023• 6 citations
Publisher

Abstract

Josephson microwave circuits are essential for the currently flourishing research on superconducting technologies, such as quantum computation, quantum sensing, and microwave signal processing. To increase the possible parameter space for device operation with respect to the current standards, many materials for superconducting circuits are under active investigation. Here, we present the realization of a frequency-tunable, weakly nonlinear Josephson microwave circuit made of the high-temperature cuprate superconductor YBa2Cu3O7 (YBCO), a material with a high critical temperature and a very high critical magnetic field. An in situ frequency-tunability of ∼300 MHz is achieved by integrating a superconducting quantum interference device (SQUID) into the circuit based on Josephson junctions directly written with a helium ion microscope (HIM). Our results demonstrate that YBCO-HIM-SQUID microwave resonators are promising candidates for quantum sensing and microwave technology applications.

DOI
10.1063/5.0146524

Related papers

Dually tunable YBCO coplanar waveguide resonators based on helium-ion-generated Josephson inductances

Kenny Fohmann, Timo J. Glebe-Märklin, Benedikt Wilde +5 more

Superconducting microwave circuits with and without Josephson inductances are the Swiss Army knife for many experiments and technologies from quantum information science to astrophysical particle detectors. Despite a large variety of existing circuit types, thin film materials and Josephson junction technologies, a flexible and reliable platform for high-magnetic-field and high-temperature applications is yet to be found. In this manuscript, we investigate coplanar waveguide cavities made of the high-temperature cuprate superconductor YBa$_2$Cu$_3$O$_7$ (YBCO), integrated with Josephson inductances and quantum interferometers that are generated by the controlled local irradiation of the YBCO with a focused helium ion beam. We obtain strongly flux-tunable microwave resonators, which not only display periodic interferometer oscillations of resonance frequency and decay rate, but also a superimposed Fraunhofer-like modulation pattern. The latter originates from the magnetic field tuning of the individual Josephson junction critical currents due to the out-of-plane junction barriers. It allows adjusting resonance frequency and flux responsivity independently of each other, potentially enabling tunable microwave circuits with low sensitivity to external magnetic-field noise over a broad range of frequencies. Finally, we investigate the temperature dependence of the cavities, show that they have promising characteristics up to 14$\,$K, and present a model for the junction-induced cavity losses.

quant-pharXiv:2605.30425•Jun 1, 2026•1 citation

Niobium quantum interference microwave circuits with monolithic three-dimensional nanobridge junctions

Kevin Uhl, Daniel Hackenbeck, Janis Peter +3 more

Nonlinear microwave circuits are key elements for many groundbreaking research directions and technologies, such as quantum computation and quantum sensing. The majority of microwave circuits with Josephson nonlinearities to date are based on aluminum thin films; therefore, they are severely restricted in their operation range regarding temperatures and external magnetic fields. Here, we present the realization of superconducting niobium microwave resonators with integrated, three-dimensional (3D) nanobridge-based superconducting quantum interference devices. The 3D nanobridges (constriction weak links) are monolithically patterned into prefabricated microwave $LC$ circuits using neon focused-ion-beam milling, and the resulting quantum interference circuits show frequency tunabilities, flux responsivities, and Kerr nonlinearities on par with comparable aluminum nanobridge devices, but with the perspective of a much larger operation parameter regime. Our results demonstrate that neon focused-ion-beam milling is a promising method for fabricating 3D constriction junctions with flexible parameters and reveal great potential for application of the resulting microwave circuits in hybrid systems with, e.g., magnons and spin ensembles or in flux-mediated optomechanics.

arXiv:2305.16276•Physical Review Applied•Feb 27, 2024•8 citations

Microstrip Superconducting Quantum Interference Devices for Quantum Information Science

De Feo, P Michael

Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.

•Jan 1, 2012•0 citations

Superconducting Microwave Resonators for Hybrid Quantum Systems in Extreme Conditions

Benedikt Wilde

Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.

•Mar 6, 2026•0 citations

High-Tc superconducting detector for highly-sensitive microwave magnetometry

F. Couëdo, Eliana Recoba Pawlowski, Julien Kermorvant +8 more

We have fabricated arrays of High-Tc Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive detectors for Radio Frequency (RF) waves. These subwavelength size devices known as Superconducting Quantum Interference Filters (SQIFs) detect the magnetic component of the electromagnetic field. We used a scalable ion irradiation technique to pattern the circuits and engineer the Josephson junctions needed to make SQUIDs. Here, we report on a 300 SQUID series array with the loop area ranging from 6 to 60 μm2, folded in a meander line covering a 3.5 mm × 120 μm substrate area, made out of a 150 nm thick YBa2Cu3O7 film. Operating at a temperature of T = 66 K in an unshielded magnetic environment under low DC bias current (I = 60 μA) and a DC magnetic field (B = 3 μT), this SQIF can detect a magnetic field of a few picoteslas at a frequency of 1.125 GHz, which corresponds to a sensitivity of a few hundreds of fT/Hz and shows a linear response over 7 decades in RF power. This work is a promising approach for the realization of low dissipative subwavelength gigahertz magnetometers.

arXiv:1901.08786•Applied Physics Letters•May 13, 2019•29 citations

Quantum interference in a high-transition-temperature superconductor based on nanoslits on SrTiO3 substrate

Jianxin Lin, Yicong Huang, Han Zhou +6 more

The Josephson junction, a key component of superconducting quantum circuits, is much less mature, especially for the high-transition (high-Tc) temperature cuprate superconductors. Herein, we report on the realization of high-Tc Josephson junction based on nanoslits on a SrTiO3 substrate. We demonstrate the ability to manipulate the current–voltage characteristics of YBa2Cu3O7−x bridges continuously from superconducting current-dominated to Josephson junction behavior by changing the irradiation parameters of the focused Ga+ ion beam on a single-crystal SrTiO3 substrate. The periodic critical current that depends on the magnetic flux coupled into the superconducting quantum interference devices was observed, which exactly reflects the effects of quantum tunneling and flux quantization. To some extent, this weak link within the framework of the semiconductor manufacturing process shows the potential to provide a cost-effective, highly efficient, and reliable pathway for scaling up quantum mechanical superconducting circuits, which is promising for the fabrication process.

Applied Physics Letters•Mar 18, 2024•3 citations
Josephson microwave circuits are essential for the currently flourishing research on superconducting technologies, such as quantum computation, quantum sensing, and microwave signal processing. To increase the possible parameter space for device operation with respect to the current standards, many materials for superconducting circuits are under active investigation. Here, we present the realization of a frequency-tunable, weakly nonlinear Josephson microwave circuit made of the high-temperature cuprate superconductor YBa2Cu3O7 (YBCO), a material with a high critical temperature and a very high critical magnetic field. An in situ frequency-tunability of ∼300 MHz is achieved by integrating a superconducting quantum interference device (SQUID) into the circuit based on Josephson junctions directly written with a helium ion microscope (HIM). Our results demonstrate that YBCO-HIM-SQUID microwave resonators are promising candidates for quantum sensing and microwave technology applications.
Superconducting microwave circuits with and without Josephson inductances are the Swiss Army knife for many experiments and technologies from quantum information science to astrophysical particle detectors. Despite a large variety of existing circuit types, thin film materials and Josephson junction technologies, a flexible and reliable platform for high-magnetic-field and high-temperature applications is yet to be found. In this manuscript, we investigate coplanar waveguide cavities made of the high-temperature cuprate superconductor YBa2_22​Cu3_33​O7_77​ (YBCO), integrated with Josephson inductances and quantum interferometers that are generated by the controlled local irradiation of the YBCO with a focused helium ion beam. We obtain strongly flux-tunable microwave resonators, which not only display periodic interferometer oscillations of resonance frequency and decay rate, but also a superimposed Fraunhofer-like modulation pattern. The latter originates from the magnetic field tuning of the individual Josephson junction critical currents due to the out-of-plane junction barriers. It allows adjusting resonance frequency and flux responsivity independently of each other, potentially enabling tunable microwave circuits with low sensitivity to external magnetic-field noise over a broad range of frequencies. Finally, we investigate the temperature dependence of the cavities, show that they have promising characteristics up to 14 \,K, and present a model for the junction-induced cavity losses.
Nonlinear microwave circuits are key elements for many groundbreaking research directions and technologies, such as quantum computation and quantum sensing. The majority of microwave circuits with Josephson nonlinearities to date are based on aluminum thin films; therefore, they are severely restricted in their operation range regarding temperatures and external magnetic fields. Here, we present the realization of superconducting niobium microwave resonators with integrated, three-dimensional (3D) nanobridge-based superconducting quantum interference devices. The 3D nanobridges (constriction weak links) are monolithically patterned into prefabricated microwave LCLCLC circuits using neon focused-ion-beam milling, and the resulting quantum interference circuits show frequency tunabilities, flux responsivities, and Kerr nonlinearities on par with comparable aluminum nanobridge devices, but with the perspective of a much larger operation parameter regime. Our results demonstrate that neon focused-ion-beam milling is a promising method for fabricating 3D constriction junctions with flexible parameters and reveal great potential for application of the resulting microwave circuits in hybrid systems with, e.g., magnons and spin ensembles or in flux-mediated optomechanics.
Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.
Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.
We have fabricated arrays of High-Tc Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive detectors for Radio Frequency (RF) waves. These subwavelength size devices known as Superconducting Quantum Interference Filters (SQIFs) detect the magnetic component of the electromagnetic field. We used a scalable ion irradiation technique to pattern the circuits and engineer the Josephson junctions needed to make SQUIDs. Here, we report on a 300 SQUID series array with the loop area ranging from 6 to 60 μm2, folded in a meander line covering a 3.5 mm × 120 μm substrate area, made out of a 150 nm thick YBa2Cu3O7 film. Operating at a temperature of T = 66 K in an unshielded magnetic environment under low DC bias current (I = 60 μA) and a DC magnetic field (B = 3 μT), this SQIF can detect a magnetic field of a few picoteslas at a frequency of 1.125 GHz, which corresponds to a sensitivity of a few hundreds of fT/Hz and shows a linear response over 7 decades in RF power. This work is a promising approach for the realization of low dissipative subwavelength gigahertz magnetometers.
The Josephson junction, a key component of superconducting quantum circuits, is much less mature, especially for the high-transition (high-Tc) temperature cuprate superconductors. Herein, we report on the realization of high-Tc Josephson junction based on nanoslits on a SrTiO3 substrate. We demonstrate the ability to manipulate the current–voltage characteristics of YBa2Cu3O7−x bridges continuously from superconducting current-dominated to Josephson junction behavior by changing the irradiation parameters of the focused Ga+ ion beam on a single-crystal SrTiO3 substrate. The periodic critical current that depends on the magnetic flux coupled into the superconducting quantum interference devices was observed, which exactly reflects the effects of quantum tunneling and flux quantization. To some extent, this weak link within the framework of the semiconductor manufacturing process shows the potential to provide a cost-effective, highly efficient, and reliable pathway for scaling up quantum mechanical superconducting circuits, which is promising for the fabrication process.