Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.30425

Dually tunable YBCO coplanar waveguide resonators based on helium-ion-generated Josephson inductances

Kenny Fohmann, Timo J. Glebe-Märklin, Benedikt Wilde, Mohamad Kazouini, Christoph Schmid, Dieter Koelle, Reinhold Kleiner, Daniel Bothner

quant-phcond-mat.supr-conSubmitted May 28, 2026• Announced Jun 1, 2026• 1 citation
arXivHTMLPDF

Abstract

Superconducting microwave circuits with and without Josephson inductances are the Swiss Army knife for many experiments and technologies from quantum information science to astrophysical particle detectors. Despite a large variety of existing circuit types, thin film materials and Josephson junction technologies, a flexible and reliable platform for high-magnetic-field and high-temperature applications is yet to be found. In this manuscript, we investigate coplanar waveguide cavities made of the high-temperature cuprate superconductor YBa$_2$Cu$_3$O$_7$ (YBCO), integrated with Josephson inductances and quantum interferometers that are generated by the controlled local irradiation of the YBCO with a focused helium ion beam. We obtain strongly flux-tunable microwave resonators, which not only display periodic interferometer oscillations of resonance frequency and decay rate, but also a superimposed Fraunhofer-like modulation pattern. The latter originates from the magnetic field tuning of the individual Josephson junction critical currents due to the out-of-plane junction barriers. It allows adjusting resonance frequency and flux responsivity independently of each other, potentially enabling tunable microwave circuits with low sensitivity to external magnetic-field noise over a broad range of frequencies. Finally, we investigate the temperature dependence of the cavities, show that they have promising characteristics up to 14$\,$K, and present a model for the junction-induced cavity losses.

Related papers

A flux-tunable YBa2Cu3O7 quantum interference microwave circuit

Kevin Uhl, Daniel Hackenbeck, Christoph Füger +3 more

Josephson microwave circuits are essential for the currently flourishing research on superconducting technologies, such as quantum computation, quantum sensing, and microwave signal processing. To increase the possible parameter space for device operation with respect to the current standards, many materials for superconducting circuits are under active investigation. Here, we present the realization of a frequency-tunable, weakly nonlinear Josephson microwave circuit made of the high-temperature cuprate superconductor YBa2Cu3O7 (YBCO), a material with a high critical temperature and a very high critical magnetic field. An in situ frequency-tunability of ∼300 MHz is achieved by integrating a superconducting quantum interference device (SQUID) into the circuit based on Josephson junctions directly written with a helium ion microscope (HIM). Our results demonstrate that YBCO-HIM-SQUID microwave resonators are promising candidates for quantum sensing and microwave technology applications.

Applied Physics Letters•May 1, 2023•6 citations

Frequency control of superconducting resonators using integrated interferometers

Irina E. Tarasova, Sergey V. Egorov, Ivan A. Nazhestkin +7 more

Predictable frequency trimming of superconducting resonators at liquid-helium temperatures requires a tuning element whose usable range remains well defined despite screening currents and hysteresis. Here, we realize flux-controlled λ/4 coplanar-waveguide resonators terminated by two-junction DC superconducting quantum interference devices (SQUIDs) fabricated in a standard Nb/Al-AlOx/Nb multilayer process. Integrated on-chip flux-bias lines allow the resonant frequency to be controlled at 4.2 K. RF measurements show periodic frequency modulation with applied flux, with a maximum shift of δfr=8.63 MHz and a single-valued tuning interval of δfr0=2.85 MHz. Near half-integer flux quanta, the response exhibits hysteretic jumps caused by the finite SQUID loop inductance, so that the usable single-valued tuning interval is smaller than the full modulation range. We develop a semi-analytical model of the frequency–flux response, supported by numerical simulations and 3D electromagnetic extraction of the device parameters, which reproduces the measured hysteretic branches and identifies the SQUID loop inductance and junction critical current as the main parameters limiting the usable tuning range. These results provide a quantitative design framework for MHz-scale frequency trimming of Nb superconducting resonators in 4 K cryogenic readout circuits.

Applied Physics Letters•Aug 24, 2026•0 citations

Superconducting Resonators with Voltage-Controlled Frequency and Nonlinearity

William M. Strickland, Bassel Heiba Elfeky, Joseph O’Connell Yuan +6 more

Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated $\mathrm{In}\mathrm{As}$-$\mathrm{Al}$ Josephson junction to a coplanar waveguide resonator, we demonstrate the use of a superconducting element with wideband gate tunability. We show that the resonant frequency is controlled via a gate-tunable Josephson inductance and that the nonlinearity of the $\mathrm{In}\mathrm{As}$-$\mathrm{Al}$ junction is nondissipative as is the case with conventional ${\mathrm{Al}\mathrm{O}}_{\mathrm{x}}\text{-Al}$ junctions. As the gate voltage is decreased, the inductive participation of the junction increases up to $44\mathrm{%}$, resulting in the resonant frequency being tuned by over $2\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$. Utilizing the wide tunability of the device, we demonstrate that two resonant modes can be adjusted such that they strongly hybridize, exhibiting an avoided-level crossing with a coupling strength of $51\phantom{\rule{0.2em}{0ex}}\mathrm{MHz}$. Implementing such voltage-tunable resonators is the first step toward realizing wafer-scale continuous voltage control in superconducting circuits for qubit-qubit coupling, quantum limited amplifiers, and quantum memory platforms.

arXiv:2210.02491•Physical Review Applied•Mar 7, 2023•33 citations

Dynamic properties of high-Tc superconducting nano-junctions made with a focused helium ion beam

F. Couëdo, P. Amari, C. Feuillet-Palma +5 more

Abstract The Josephson junction (JJ) is the corner stone of superconducting electronics and quantum information processing. While the technology for fabricating low T c JJ is mature and delivers quantum circuits able to reach the “quantum supremacy”, the fabrication of reproducible and low-noise high- T c JJ is still a challenge to be taken up. Here we report on noise properties at RF frequencies of recently introduced high- T c Josephson nano-junctions fabricated by mean of a Helium ion beam focused at sub-nanometer scale on a YBa 2 Cu 3 O 7 thin film. We show that their current-voltage characteristics follow the standard Resistively-Shunted-Junction (RSJ) circuit model, and that their characteristic frequency f c = (2 e / h ) I c R n reaches ~300 GHz at low temperature. Using the “detector response” method, we evidence that the Josephson oscillation linewidth is only limited by the thermal noise in the RSJ model for temperature ranging from T ~ 20 K to 75 K. At lower temperature and for the highest He irradiation dose, the shot noise contribution must also be taken into account when approaching the tunneling regime. We conclude that these Josephson nano-junctions present the lowest noise level possible, which makes them very promising for future applications in the microwave and terahertz regimes.

arXiv:1908.11163•Scientific Reports•Jun 24, 2020•26 citations

Tunable superconducting resonators via on-chip control of local magnetic field

Chen-Guang 晨光 Wang 王, Wen-Cheng 文诚 Yue 岳, Xuecou Tu +13 more

Superconducting microwave resonators play a pivotal role in superconducting quantum circuits. The ability to fine-tune their resonant frequencies provides enhanced control and flexibility. Here, we introduce a frequency-tunable superconducting coplanar waveguide resonator. By applying electrical currents through specifically designed ground wires, we achieve the generation and control of a localized magnetic field on the central line of the resonator, enabling continuous tuning of its resonant frequency. We demonstrate a frequency tuning range of 54.85 MHz in a 6.21-GHz resonator. This integrated and tunable resonator holds great potential as a dynamically tunable filter and as a key component of communication buses and memory elements in superconducting quantum computing.

arXiv:2405.09170•Chinese Physics B•Mar 1, 2024•2 citations

Microwave Losses in YBCO Coplanar Waveguide Resonators at Low Power and Millikelvin Range

M. Arzeo, Floriana Lombardi, Thilo Bauch

We have investigated the temperature dependence of microwave losses in the low-power limit and millikelvin temperature range of a thin-film YBa2Cu3O7-x(YBCO) λ/2 coplanar waveguide resonator patterned on a (La0.3Sr0.7) (Al0.65Ta0.35)O3(LSAT) substrate covered by a CeO2seed layer. The unloaded quality factor is mainly governed by the surface resistance of the YBCO film and the dielectric losses caused by resonant absorption due to a bath of two-level fluctuators in the dielectrics. The value of the unloaded quality factor at 20 mK and low power, i.e., Q0≃2000, allows for the realization of YBCO microwave quantum circuits implementing biepitaxial grain-boundary Josephson junctions.

IEEE Transactions on Applied Superconductivity•Oct 24, 2014•6 citations
Superconducting microwave circuits with and without Josephson inductances are the Swiss Army knife for many experiments and technologies from quantum information science to astrophysical particle detectors. Despite a large variety of existing circuit types, thin film materials and Josephson junction technologies, a flexible and reliable platform for high-magnetic-field and high-temperature applications is yet to be found. In this manuscript, we investigate coplanar waveguide cavities made of the high-temperature cuprate superconductor YBa2_22​Cu3_33​O7_77​ (YBCO), integrated with Josephson inductances and quantum interferometers that are generated by the controlled local irradiation of the YBCO with a focused helium ion beam. We obtain strongly flux-tunable microwave resonators, which not only display periodic interferometer oscillations of resonance frequency and decay rate, but also a superimposed Fraunhofer-like modulation pattern. The latter originates from the magnetic field tuning of the individual Josephson junction critical currents due to the out-of-plane junction barriers. It allows adjusting resonance frequency and flux responsivity independently of each other, potentially enabling tunable microwave circuits with low sensitivity to external magnetic-field noise over a broad range of frequencies. Finally, we investigate the temperature dependence of the cavities, show that they have promising characteristics up to 14 \,K, and present a model for the junction-induced cavity losses.
Josephson microwave circuits are essential for the currently flourishing research on superconducting technologies, such as quantum computation, quantum sensing, and microwave signal processing. To increase the possible parameter space for device operation with respect to the current standards, many materials for superconducting circuits are under active investigation. Here, we present the realization of a frequency-tunable, weakly nonlinear Josephson microwave circuit made of the high-temperature cuprate superconductor YBa2Cu3O7 (YBCO), a material with a high critical temperature and a very high critical magnetic field. An in situ frequency-tunability of ∼300 MHz is achieved by integrating a superconducting quantum interference device (SQUID) into the circuit based on Josephson junctions directly written with a helium ion microscope (HIM). Our results demonstrate that YBCO-HIM-SQUID microwave resonators are promising candidates for quantum sensing and microwave technology applications.
Predictable frequency trimming of superconducting resonators at liquid-helium temperatures requires a tuning element whose usable range remains well defined despite screening currents and hysteresis. Here, we realize flux-controlled λ/4 coplanar-waveguide resonators terminated by two-junction DC superconducting quantum interference devices (SQUIDs) fabricated in a standard Nb/Al-AlOx/Nb multilayer process. Integrated on-chip flux-bias lines allow the resonant frequency to be controlled at 4.2 K. RF measurements show periodic frequency modulation with applied flux, with a maximum shift of δfr=8.63 MHz and a single-valued tuning interval of δfr0=2.85 MHz. Near half-integer flux quanta, the response exhibits hysteretic jumps caused by the finite SQUID loop inductance, so that the usable single-valued tuning interval is smaller than the full modulation range. We develop a semi-analytical model of the frequency–flux response, supported by numerical simulations and 3D electromagnetic extraction of the device parameters, which reproduces the measured hysteretic branches and identifies the SQUID loop inductance and junction critical current as the main parameters limiting the usable tuning range. These results provide a quantitative design framework for MHz-scale frequency trimming of Nb superconducting resonators in 4 K cryogenic readout circuits.
Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated InAs\mathrm{In}\mathrm{As}InAs-Al\mathrm{Al}Al Josephson junction to a coplanar waveguide resonator, we demonstrate the use of a superconducting element with wideband gate tunability. We show that the resonant frequency is controlled via a gate-tunable Josephson inductance and that the nonlinearity of the InAs\mathrm{In}\mathrm{As}InAs-Al\mathrm{Al}Al junction is nondissipative as is the case with conventional AlOx-Al{\mathrm{Al}\mathrm{O}}_{\mathrm{x}}\text{-Al}AlOx​-Al junctions. As the gate voltage is decreased, the inductive participation of the junction increases up to $44\mathrm{%}$, resulting in the resonant frequency being tuned by over 2GHz2\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}2GHz. Utilizing the wide tunability of the device, we demonstrate that two resonant modes can be adjusted such that they strongly hybridize, exhibiting an avoided-level crossing with a coupling strength of 51MHz51\phantom{\rule{0.2em}{0ex}}\mathrm{MHz}51MHz. Implementing such voltage-tunable resonators is the first step toward realizing wafer-scale continuous voltage control in superconducting circuits for qubit-qubit coupling, quantum limited amplifiers, and quantum memory platforms.
Abstract The Josephson junction (JJ) is the corner stone of superconducting electronics and quantum information processing. While the technology for fabricating low T c JJ is mature and delivers quantum circuits able to reach the “quantum supremacy”, the fabrication of reproducible and low-noise high- T c JJ is still a challenge to be taken up. Here we report on noise properties at RF frequencies of recently introduced high- T c Josephson nano-junctions fabricated by mean of a Helium ion beam focused at sub-nanometer scale on a YBa 2 Cu 3 O 7 thin film. We show that their current-voltage characteristics follow the standard Resistively-Shunted-Junction (RSJ) circuit model, and that their characteristic frequency f c = (2 e / h ) I c R n reaches ~300 GHz at low temperature. Using the “detector response” method, we evidence that the Josephson oscillation linewidth is only limited by the thermal noise in the RSJ model for temperature ranging from T ~ 20 K to 75 K. At lower temperature and for the highest He irradiation dose, the shot noise contribution must also be taken into account when approaching the tunneling regime. We conclude that these Josephson nano-junctions present the lowest noise level possible, which makes them very promising for future applications in the microwave and terahertz regimes.
Superconducting microwave resonators play a pivotal role in superconducting quantum circuits. The ability to fine-tune their resonant frequencies provides enhanced control and flexibility. Here, we introduce a frequency-tunable superconducting coplanar waveguide resonator. By applying electrical currents through specifically designed ground wires, we achieve the generation and control of a localized magnetic field on the central line of the resonator, enabling continuous tuning of its resonant frequency. We demonstrate a frequency tuning range of 54.85 MHz in a 6.21-GHz resonator. This integrated and tunable resonator holds great potential as a dynamically tunable filter and as a key component of communication buses and memory elements in superconducting quantum computing.
We have investigated the temperature dependence of microwave losses in the low-power limit and millikelvin temperature range of a thin-film YBa2Cu3O7-x(YBCO) λ/2 coplanar waveguide resonator patterned on a (La0.3Sr0.7) (Al0.65Ta0.35)O3(LSAT) substrate covered by a CeO2seed layer. The unloaded quality factor is mainly governed by the surface resistance of the YBCO film and the dielectric losses caused by resonant absorption due to a bath of two-level fluctuators in the dielectrics. The value of the unloaded quality factor at 20 mK and low power, i.e., Q0≃2000, allows for the realization of YBCO microwave quantum circuits implementing biepitaxial grain-boundary Josephson junctions.