Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Digest - IEEE Antennas and Propagation Society. International Symposium

Light quantum positioning method based on integrated coincidence counting and adaptive light source selection

Jing Zhang, Mu Zhou, Wei Nie, Wei He

Published Jul 10, 2022• 0 citations
Publisher

Abstract

Aiming at the problem that the dynamic change of the scattering environment affects the propagation distance estimation performance by different light sources, resulting in low positioning accuracy and poor robustness, a light quantum positioning method based on integrated coincidence counting and adaptive light source selection is proposed. Specifically, the method considers the dynamic changes of the scattering environment to group the entangled light time pulse sequences, calculates the signal propagation distance of each light source under each group based on the coincidence count, and takes the relative error of each light source under each group as the basis to dynamically select different light sources for positioning. The experimental results show that the proposed method has higher positioning accuracy and stronger positioning robustness.

DOI
10.1109/ap-s/usnc-ursi47032.2022.9886946

Related papers

Entangled Quantum Positioning Based on Scattering Free Path Model

Jing Zhang, Mu Zhou, Wei Nie +2 more

Quantum positioning is based on quantum signals to realize target detection. However, the quantum signal is inevitably interfered by the scattering environment during transmission, and the interference changes with the time and transmission path from each Light Source (LS) to the target. It is thereby needed to build up a good strategy for finding the set of the most useful LSs for quantum positioning. Therefore, we propose an entangled quantum positioning method based on the Scattering Free Path (SFP) model. Firstly, the light quantum transmission model is established to describe the change of photon number and transmission distance of the photon. Secondly, the SFP for each LS and each time group is constructed based on environment information and coincidence counting. Thirdly, the SFP sequence for each LS is resampled, and the relative SFP error under each time group is calculated. Finally, the LSs corresponding to the minimum relative errors are selected for each time group to estimate the position coordinate of the target.

IEEE Asia-Pacific Conference on Antennas and Propagation•Nov 4, 2022•0 citations

Passive Target Positioning on Uncertain Detection Path Based on Entangled Light Quantum

Mu Zhou, Qian Wang, Liangbo Xie +2 more

As one of the state-of-the-art technologies currently being studied in the field of target positioning, the entangled light quantum-based passive target positioning method uses quantum entangled states to detect and localize the target, thus providing highly-accurate and anti-interference positioning services. The conventional methods seldom consider the problem that maybe a pseudo-target is detected when there is actually no target due to the interference of particles, scatterers, and noise photons during light quantum transmission. To address this problem, this paper proposes a new passive target positioning method on uncertain detection path based on entangled light quantum. Specifically, first of all, by converting the continuous light energy into the discrete photon number, the photon return rate is used to calculate the number of arrival photons based on the counting characteristics of the single photon detector. Second, the detection probabilities of signal, idler, and noise photons are calculated to obtain the coincidence probability at the receiver. Third, according to the coincidence count value of the entangled light time pulse sequence, the Constant False Alarm Rate (CFAR) detection model is established, and the corresponding detection threshold is adaptively adjusted with the change of the background noise to achieve highly-sensitive target detection. Finally, the relative error for each light source is considered to select the optimal light sources with the smallest relative distance errors for target positioning. In addition, the results show that the detection probability of the proposed method is over 95% with the false alarm probability 0.05, the positioning error is centimeter-level, and the confidence probability within 2.60 cm can reach 92%.

IEEE Transactions on Instrumentation and Measurement•Jan 1, 2023•9 citations

Entangled Light 3-D Quantum Imaging Method Based on Adaptive Depth Compression

Zhongyin Hu, Mu Zhou, Jingyang Cao +3 more

Aiming at the problems of sampling redundancy, insufficient accuracy, and noise sensitivity of traditional quantum depth imaging methods in low-light and long-distance scenes, an entangled light 3-D quantum imaging method based on adaptive depth compression is proposed. This method combines the spatiotemporal correlation and anti-interference characteristics of quantum entangled photon pairs, integrates compressed sensing theory to break through the bottleneck of Nyquist sampling, and achieves efficient imaging by dynamically adjusting the sampling strategy. Based on the time-of-flight difference between signal photons and noise photons, an adaptive algorithm is designed to optimize the sampling integration time and compression measurement matrix of each pixel in real time: the sampling amount is reduced in the high-reflectivity region, and the sampling time is extended in the low-reflectivity region. At the same time, quantum entanglement is used to improve the detection sensitivity of weak light signals. Simulation and experimental results show that the proposed method can significantly reduce the number of sampling operations and imaging time, while maintaining excellent depth estimation accuracy and robustness, and, thus, provide a new technical path for low-light, long-distance, and real-time 3-D imaging.

IEEE Internet of Things Journal•Jul 6, 2026•0 citations

Entangled Quantum Imaging Method Based on Two-Step Adaptive Sampling Optimization

Zhongyin Hu, Mu Zhou, Yong Ma +3 more

In recent years, quantum information technology, as a subversive and strategic technology that has attracted much attention, acquires, transmits, and processes information by means of unique physical phenomena such as quantum entanglement, nonlocality, and non-cloning. Quantum imaging technology achieves non-local imaging of targets by extracting entangled light quantum information with temporal and spatial correlation characteristics. By using the anti-interference and anti-turbulence characteristics of quantum entangled states, quantum imaging technology can break through the physical limits of traditional imaging fields, thereby improving imaging resolution and sensitivity. The latest technological development in quantum imaging has prompted researchers to study high-resolution and fast quantum imaging based on the spatial correlation characteristics of entangled photon pairs. In this circumstance, we propose a novel quantum imaging method based on two-step adaptive sampling optimization and carry out experimental verification. In concrete terms, in order to solve the problem that the efficiency of entangled light quantum imaging is limited by Digital Micromirror Device (DMD) sampling, we select the two-step adaptive sampling optimization algorithm to reduce the influence of DMD scanning on imaging efficiency. At the same time, for the sake of solving the problem that the quality of entangled photon quantum imaging is limited by the accuracy of coincidence counting, we add delay difference calculation in the imaging process and correct the signal photon arrival time pulse sequence to ensure the accuracy of coincidence counting. Finally, we conduct a large number of experiments to evaluate the performance of the two-step adaptive sampling optimization algorithm and verify the superiority of the proposed entangled quantum imaging method practically.

IEEE Journal of Selected Topics in Quantum Electronics•Jan 8, 2025•1 citation

An Efficient and Robust Fusion Positioning System Based on Entangled Photons

Wei He, Yong Wang, Mu Zhou +3 more

Precise positioning is a key factor and enabler technology for many use cases on intelligent transportation systems (ITS) and connected and automated vehicles (CAVs). Recently, the quantum positioning system (QPS) based on quantum ranging has emerged as a novel way to improve security and precision. As a key process of QPS, the entangled photons based ranging technology has picosecond-level clock synchronization, and the ranging accuracy can reach the Heisenberg limit. If promising QPS is deployed in the ITS and CAVs, it will cause a profound change. However, the existing QPS still lacks accuracy and robustness in different scenarios. To solve this problem, we proposed an efficient and robust fusion positioning system based on entangled photons. In this system, we derive the ranging accuracy limit with many factors and propose a fast data grouping and selection algorithm to improve real-time performance. Furthermore, we propose a fusion extended fingerprint localization method for robust positioning in the dynamic environment. The effectiveness and robustness of the system are verified by extensive experiments. When the range is 15m, the ranging accuracy can be limited to 0.0018m. The proposed system achieves the probability of positioning errors 90% within 0.13m with only two APs.

IEEE Journal on Selected Areas in Communications•Oct 9, 2023•8 citations

Fast and High-Resolution Entangled Optical Quantum Radar Sensing Network for Complex Environment

Jingyang Cao, Mu Zhou, Dusit Tao Niyato +2 more

The entangled quantum radar applies the quantum information technology to the radar sensing network and detection system. The dynamic particle changes and optical attenuation caused by complex atmospheric environments will severely limit the traditional radar performance. Due to entanglement characteristics, the entangled optical quantum radar has better anti-stealth interference ability, stronger anti-turbulence properties, and higher spatial resolution which makes it promising in complex and high-attenuation environments. In addition, quantum radar based on the entangled light source can overcome the limitations of low imaging resolution and low confidentiality in traditional target detection. Therefore, high-precision positioning and high-resolution imaging are the research focus of the quantum radar sensing network. Based on this, we first design and optimize an optical path structure of the quantum entangled light source to obtain higher brightness entangled source which is suitable for complex atmospheric environments. Second, in response to the problem of low positioning accuracy in the traditional quantum radar, we design a new positioning optical path and propose a novel entangled optical quantum positioning method based on the photon scattering model. Third, to address the problems of low resolution and slow speed in traditional quantum radar imaging, we propose a new entangled light quantum imaging method based on two-phase coincidence counting. Finally, we conduct extensive experiments to evaluate the effectiveness of the proposed method in complex atmospheric environments and further provide possibilities for the entangled light source quantum radar sensing network.

IEEE Network•May 20, 2024•4 citations
Aiming at the problem that the dynamic change of the scattering environment affects the propagation distance estimation performance by different light sources, resulting in low positioning accuracy and poor robustness, a light quantum positioning method based on integrated coincidence counting and adaptive light source selection is proposed. Specifically, the method considers the dynamic changes of the scattering environment to group the entangled light time pulse sequences, calculates the signal propagation distance of each light source under each group based on the coincidence count, and takes the relative error of each light source under each group as the basis to dynamically select different light sources for positioning. The experimental results show that the proposed method has higher positioning accuracy and stronger positioning robustness.
Quantum positioning is based on quantum signals to realize target detection. However, the quantum signal is inevitably interfered by the scattering environment during transmission, and the interference changes with the time and transmission path from each Light Source (LS) to the target. It is thereby needed to build up a good strategy for finding the set of the most useful LSs for quantum positioning. Therefore, we propose an entangled quantum positioning method based on the Scattering Free Path (SFP) model. Firstly, the light quantum transmission model is established to describe the change of photon number and transmission distance of the photon. Secondly, the SFP for each LS and each time group is constructed based on environment information and coincidence counting. Thirdly, the SFP sequence for each LS is resampled, and the relative SFP error under each time group is calculated. Finally, the LSs corresponding to the minimum relative errors are selected for each time group to estimate the position coordinate of the target.
As one of the state-of-the-art technologies currently being studied in the field of target positioning, the entangled light quantum-based passive target positioning method uses quantum entangled states to detect and localize the target, thus providing highly-accurate and anti-interference positioning services. The conventional methods seldom consider the problem that maybe a pseudo-target is detected when there is actually no target due to the interference of particles, scatterers, and noise photons during light quantum transmission. To address this problem, this paper proposes a new passive target positioning method on uncertain detection path based on entangled light quantum. Specifically, first of all, by converting the continuous light energy into the discrete photon number, the photon return rate is used to calculate the number of arrival photons based on the counting characteristics of the single photon detector. Second, the detection probabilities of signal, idler, and noise photons are calculated to obtain the coincidence probability at the receiver. Third, according to the coincidence count value of the entangled light time pulse sequence, the Constant False Alarm Rate (CFAR) detection model is established, and the corresponding detection threshold is adaptively adjusted with the change of the background noise to achieve highly-sensitive target detection. Finally, the relative error for each light source is considered to select the optimal light sources with the smallest relative distance errors for target positioning. In addition, the results show that the detection probability of the proposed method is over 95% with the false alarm probability 0.05, the positioning error is centimeter-level, and the confidence probability within 2.60 cm can reach 92%.
Aiming at the problems of sampling redundancy, insufficient accuracy, and noise sensitivity of traditional quantum depth imaging methods in low-light and long-distance scenes, an entangled light 3-D quantum imaging method based on adaptive depth compression is proposed. This method combines the spatiotemporal correlation and anti-interference characteristics of quantum entangled photon pairs, integrates compressed sensing theory to break through the bottleneck of Nyquist sampling, and achieves efficient imaging by dynamically adjusting the sampling strategy. Based on the time-of-flight difference between signal photons and noise photons, an adaptive algorithm is designed to optimize the sampling integration time and compression measurement matrix of each pixel in real time: the sampling amount is reduced in the high-reflectivity region, and the sampling time is extended in the low-reflectivity region. At the same time, quantum entanglement is used to improve the detection sensitivity of weak light signals. Simulation and experimental results show that the proposed method can significantly reduce the number of sampling operations and imaging time, while maintaining excellent depth estimation accuracy and robustness, and, thus, provide a new technical path for low-light, long-distance, and real-time 3-D imaging.
In recent years, quantum information technology, as a subversive and strategic technology that has attracted much attention, acquires, transmits, and processes information by means of unique physical phenomena such as quantum entanglement, nonlocality, and non-cloning. Quantum imaging technology achieves non-local imaging of targets by extracting entangled light quantum information with temporal and spatial correlation characteristics. By using the anti-interference and anti-turbulence characteristics of quantum entangled states, quantum imaging technology can break through the physical limits of traditional imaging fields, thereby improving imaging resolution and sensitivity. The latest technological development in quantum imaging has prompted researchers to study high-resolution and fast quantum imaging based on the spatial correlation characteristics of entangled photon pairs. In this circumstance, we propose a novel quantum imaging method based on two-step adaptive sampling optimization and carry out experimental verification. In concrete terms, in order to solve the problem that the efficiency of entangled light quantum imaging is limited by Digital Micromirror Device (DMD) sampling, we select the two-step adaptive sampling optimization algorithm to reduce the influence of DMD scanning on imaging efficiency. At the same time, for the sake of solving the problem that the quality of entangled photon quantum imaging is limited by the accuracy of coincidence counting, we add delay difference calculation in the imaging process and correct the signal photon arrival time pulse sequence to ensure the accuracy of coincidence counting. Finally, we conduct a large number of experiments to evaluate the performance of the two-step adaptive sampling optimization algorithm and verify the superiority of the proposed entangled quantum imaging method practically.
Precise positioning is a key factor and enabler technology for many use cases on intelligent transportation systems (ITS) and connected and automated vehicles (CAVs). Recently, the quantum positioning system (QPS) based on quantum ranging has emerged as a novel way to improve security and precision. As a key process of QPS, the entangled photons based ranging technology has picosecond-level clock synchronization, and the ranging accuracy can reach the Heisenberg limit. If promising QPS is deployed in the ITS and CAVs, it will cause a profound change. However, the existing QPS still lacks accuracy and robustness in different scenarios. To solve this problem, we proposed an efficient and robust fusion positioning system based on entangled photons. In this system, we derive the ranging accuracy limit with many factors and propose a fast data grouping and selection algorithm to improve real-time performance. Furthermore, we propose a fusion extended fingerprint localization method for robust positioning in the dynamic environment. The effectiveness and robustness of the system are verified by extensive experiments. When the range is 15m, the ranging accuracy can be limited to 0.0018m. The proposed system achieves the probability of positioning errors 90% within 0.13m with only two APs.
The entangled quantum radar applies the quantum information technology to the radar sensing network and detection system. The dynamic particle changes and optical attenuation caused by complex atmospheric environments will severely limit the traditional radar performance. Due to entanglement characteristics, the entangled optical quantum radar has better anti-stealth interference ability, stronger anti-turbulence properties, and higher spatial resolution which makes it promising in complex and high-attenuation environments. In addition, quantum radar based on the entangled light source can overcome the limitations of low imaging resolution and low confidentiality in traditional target detection. Therefore, high-precision positioning and high-resolution imaging are the research focus of the quantum radar sensing network. Based on this, we first design and optimize an optical path structure of the quantum entangled light source to obtain higher brightness entangled source which is suitable for complex atmospheric environments. Second, in response to the problem of low positioning accuracy in the traditional quantum radar, we design a new positioning optical path and propose a novel entangled optical quantum positioning method based on the photon scattering model. Third, to address the problems of low resolution and slow speed in traditional quantum radar imaging, we propose a new entangled light quantum imaging method based on two-phase coincidence counting. Finally, we conduct extensive experiments to evaluate the effectiveness of the proposed method in complex atmospheric environments and further provide possibilities for the entangled light source quantum radar sensing network.