Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Asia-Pacific Conference on Antennas and Propagation

Entangled Quantum Positioning Based on Scattering Free Path Model

Jing Zhang, Mu Zhou, Wei Nie, Yong Wang, Jingyang Cao

Published Nov 4, 2022• 0 citations
Publisher

Abstract

Quantum positioning is based on quantum signals to realize target detection. However, the quantum signal is inevitably interfered by the scattering environment during transmission, and the interference changes with the time and transmission path from each Light Source (LS) to the target. It is thereby needed to build up a good strategy for finding the set of the most useful LSs for quantum positioning. Therefore, we propose an entangled quantum positioning method based on the Scattering Free Path (SFP) model. Firstly, the light quantum transmission model is established to describe the change of photon number and transmission distance of the photon. Secondly, the SFP for each LS and each time group is constructed based on environment information and coincidence counting. Thirdly, the SFP sequence for each LS is resampled, and the relative SFP error under each time group is calculated. Finally, the LSs corresponding to the minimum relative errors are selected for each time group to estimate the position coordinate of the target.

DOI
10.1109/apcap56600.2022.10069488

Related papers

Passive Target Positioning on Uncertain Detection Path Based on Entangled Light Quantum

Mu Zhou, Qian Wang, Liangbo Xie +2 more

As one of the state-of-the-art technologies currently being studied in the field of target positioning, the entangled light quantum-based passive target positioning method uses quantum entangled states to detect and localize the target, thus providing highly-accurate and anti-interference positioning services. The conventional methods seldom consider the problem that maybe a pseudo-target is detected when there is actually no target due to the interference of particles, scatterers, and noise photons during light quantum transmission. To address this problem, this paper proposes a new passive target positioning method on uncertain detection path based on entangled light quantum. Specifically, first of all, by converting the continuous light energy into the discrete photon number, the photon return rate is used to calculate the number of arrival photons based on the counting characteristics of the single photon detector. Second, the detection probabilities of signal, idler, and noise photons are calculated to obtain the coincidence probability at the receiver. Third, according to the coincidence count value of the entangled light time pulse sequence, the Constant False Alarm Rate (CFAR) detection model is established, and the corresponding detection threshold is adaptively adjusted with the change of the background noise to achieve highly-sensitive target detection. Finally, the relative error for each light source is considered to select the optimal light sources with the smallest relative distance errors for target positioning. In addition, the results show that the detection probability of the proposed method is over 95% with the false alarm probability 0.05, the positioning error is centimeter-level, and the confidence probability within 2.60 cm can reach 92%.

IEEE Transactions on Instrumentation and Measurement•Jan 1, 2023•9 citations

Light quantum positioning method based on integrated coincidence counting and adaptive light source selection

Jing Zhang, Mu Zhou, Wei Nie +1 more

Aiming at the problem that the dynamic change of the scattering environment affects the propagation distance estimation performance by different light sources, resulting in low positioning accuracy and poor robustness, a light quantum positioning method based on integrated coincidence counting and adaptive light source selection is proposed. Specifically, the method considers the dynamic changes of the scattering environment to group the entangled light time pulse sequences, calculates the signal propagation distance of each light source under each group based on the coincidence count, and takes the relative error of each light source under each group as the basis to dynamically select different light sources for positioning. The experimental results show that the proposed method has higher positioning accuracy and stronger positioning robustness.

Digest - IEEE Antennas and Propagation Society. International Symposium•Jul 10, 2022•0 citations

Quantum 3-D Imaging and Reflectivity Estimation Based on Entangled Photons in Low-Light Environments

Mu Zhou, Jiangli Peng, Jingyang Cao +2 more

Three-dimensional (3D) imaging in low-light environments has broad application prospects. High-quality 3D imaging requires obtaining both the depth and reflectivity information of the target. With the rapid development of Quantum Information Technology (QIT), Quantum Imaging (QI) provides a new approach to achieve high-quality 3D imaging. However, traditional QI methods are limited to Two-dimensional (2D) imaging and cannot accurately extract the depth information from the target. These methods also suffer from insufficient precision in reflectivity calculations. Therefore, we introduce a novel quantum 3D imaging and reflectivity estimation method based on entangled photons. Specifically, we first utilize the spatiotemporal correlation characteristics of entangled photon pairs combined with coincidence measurement technology to accurately determine target depth. Second, we analyze the distribution of entangled photon numbers during free-space transmission to construct a photon-based detection probability model. Third, we use this model to derive the probability density function of coincidence counts. Finally, we estimate the surface reflectivity information through statistical analysis of coincidence counting. Experimental results demonstrate that the proposed method can accurately reconstruct both depth and reflectivity profiles of the target in low-light environments. These findings validate the effectiveness of our method and highlight the potential of quantum 3D imaging for target detection in low-light environments.

IEEE Internet of Things Journal•Sep 1, 2025•3 citations

Fast and High-Resolution Entangled Optical Quantum Radar Sensing Network for Complex Environment

Jingyang Cao, Mu Zhou, Dusit Tao Niyato +2 more

The entangled quantum radar applies the quantum information technology to the radar sensing network and detection system. The dynamic particle changes and optical attenuation caused by complex atmospheric environments will severely limit the traditional radar performance. Due to entanglement characteristics, the entangled optical quantum radar has better anti-stealth interference ability, stronger anti-turbulence properties, and higher spatial resolution which makes it promising in complex and high-attenuation environments. In addition, quantum radar based on the entangled light source can overcome the limitations of low imaging resolution and low confidentiality in traditional target detection. Therefore, high-precision positioning and high-resolution imaging are the research focus of the quantum radar sensing network. Based on this, we first design and optimize an optical path structure of the quantum entangled light source to obtain higher brightness entangled source which is suitable for complex atmospheric environments. Second, in response to the problem of low positioning accuracy in the traditional quantum radar, we design a new positioning optical path and propose a novel entangled optical quantum positioning method based on the photon scattering model. Third, to address the problems of low resolution and slow speed in traditional quantum radar imaging, we propose a new entangled light quantum imaging method based on two-phase coincidence counting. Finally, we conduct extensive experiments to evaluate the effectiveness of the proposed method in complex atmospheric environments and further provide possibilities for the entangled light source quantum radar sensing network.

IEEE Network•May 20, 2024•4 citations

Quantum Electromagnetic Scattering and the Sidelobe Advantage

Matthew J. Brandsema, Marco O. Lanzagorta, Ram M. Narayanan

Quantum remote sensing, also known as Quantum Detection and Ranging (QUDAR), is the use of entangled photon states to detect targets at a stand-off distance. It inherently relies on sending many single photons through free space, bouncing off of a target and returning to the sensor. It is therefore necessary to understand how single photons interact and scatter from targets of macroscopic size. This paper relates quantum and classical scattering in the far field regime. Specifically, we show that due to the photon's position uncertainty, the path over which the photon traverses is not well defined, and this causes quantum interference. The result of this interference exactly replicates classical scattering behavior of electromagnetic waves. We will show that one can exactly derive the classical electric field scattering integral using a purely quantum construction. Although this paper focuses on the context of QUDAR, it is very general to any application involving far-field electromagnetic scattering.

IEEE International Radar Conference•Apr 1, 2020•3 citations

Entangled Light 3-D Quantum Imaging Method Based on Adaptive Depth Compression

Zhongyin Hu, Mu Zhou, Jingyang Cao +3 more

Aiming at the problems of sampling redundancy, insufficient accuracy, and noise sensitivity of traditional quantum depth imaging methods in low-light and long-distance scenes, an entangled light 3-D quantum imaging method based on adaptive depth compression is proposed. This method combines the spatiotemporal correlation and anti-interference characteristics of quantum entangled photon pairs, integrates compressed sensing theory to break through the bottleneck of Nyquist sampling, and achieves efficient imaging by dynamically adjusting the sampling strategy. Based on the time-of-flight difference between signal photons and noise photons, an adaptive algorithm is designed to optimize the sampling integration time and compression measurement matrix of each pixel in real time: the sampling amount is reduced in the high-reflectivity region, and the sampling time is extended in the low-reflectivity region. At the same time, quantum entanglement is used to improve the detection sensitivity of weak light signals. Simulation and experimental results show that the proposed method can significantly reduce the number of sampling operations and imaging time, while maintaining excellent depth estimation accuracy and robustness, and, thus, provide a new technical path for low-light, long-distance, and real-time 3-D imaging.

IEEE Internet of Things Journal•Jul 6, 2026•0 citations
Quantum positioning is based on quantum signals to realize target detection. However, the quantum signal is inevitably interfered by the scattering environment during transmission, and the interference changes with the time and transmission path from each Light Source (LS) to the target. It is thereby needed to build up a good strategy for finding the set of the most useful LSs for quantum positioning. Therefore, we propose an entangled quantum positioning method based on the Scattering Free Path (SFP) model. Firstly, the light quantum transmission model is established to describe the change of photon number and transmission distance of the photon. Secondly, the SFP for each LS and each time group is constructed based on environment information and coincidence counting. Thirdly, the SFP sequence for each LS is resampled, and the relative SFP error under each time group is calculated. Finally, the LSs corresponding to the minimum relative errors are selected for each time group to estimate the position coordinate of the target.
As one of the state-of-the-art technologies currently being studied in the field of target positioning, the entangled light quantum-based passive target positioning method uses quantum entangled states to detect and localize the target, thus providing highly-accurate and anti-interference positioning services. The conventional methods seldom consider the problem that maybe a pseudo-target is detected when there is actually no target due to the interference of particles, scatterers, and noise photons during light quantum transmission. To address this problem, this paper proposes a new passive target positioning method on uncertain detection path based on entangled light quantum. Specifically, first of all, by converting the continuous light energy into the discrete photon number, the photon return rate is used to calculate the number of arrival photons based on the counting characteristics of the single photon detector. Second, the detection probabilities of signal, idler, and noise photons are calculated to obtain the coincidence probability at the receiver. Third, according to the coincidence count value of the entangled light time pulse sequence, the Constant False Alarm Rate (CFAR) detection model is established, and the corresponding detection threshold is adaptively adjusted with the change of the background noise to achieve highly-sensitive target detection. Finally, the relative error for each light source is considered to select the optimal light sources with the smallest relative distance errors for target positioning. In addition, the results show that the detection probability of the proposed method is over 95% with the false alarm probability 0.05, the positioning error is centimeter-level, and the confidence probability within 2.60 cm can reach 92%.
Aiming at the problem that the dynamic change of the scattering environment affects the propagation distance estimation performance by different light sources, resulting in low positioning accuracy and poor robustness, a light quantum positioning method based on integrated coincidence counting and adaptive light source selection is proposed. Specifically, the method considers the dynamic changes of the scattering environment to group the entangled light time pulse sequences, calculates the signal propagation distance of each light source under each group based on the coincidence count, and takes the relative error of each light source under each group as the basis to dynamically select different light sources for positioning. The experimental results show that the proposed method has higher positioning accuracy and stronger positioning robustness.
Three-dimensional (3D) imaging in low-light environments has broad application prospects. High-quality 3D imaging requires obtaining both the depth and reflectivity information of the target. With the rapid development of Quantum Information Technology (QIT), Quantum Imaging (QI) provides a new approach to achieve high-quality 3D imaging. However, traditional QI methods are limited to Two-dimensional (2D) imaging and cannot accurately extract the depth information from the target. These methods also suffer from insufficient precision in reflectivity calculations. Therefore, we introduce a novel quantum 3D imaging and reflectivity estimation method based on entangled photons. Specifically, we first utilize the spatiotemporal correlation characteristics of entangled photon pairs combined with coincidence measurement technology to accurately determine target depth. Second, we analyze the distribution of entangled photon numbers during free-space transmission to construct a photon-based detection probability model. Third, we use this model to derive the probability density function of coincidence counts. Finally, we estimate the surface reflectivity information through statistical analysis of coincidence counting. Experimental results demonstrate that the proposed method can accurately reconstruct both depth and reflectivity profiles of the target in low-light environments. These findings validate the effectiveness of our method and highlight the potential of quantum 3D imaging for target detection in low-light environments.
The entangled quantum radar applies the quantum information technology to the radar sensing network and detection system. The dynamic particle changes and optical attenuation caused by complex atmospheric environments will severely limit the traditional radar performance. Due to entanglement characteristics, the entangled optical quantum radar has better anti-stealth interference ability, stronger anti-turbulence properties, and higher spatial resolution which makes it promising in complex and high-attenuation environments. In addition, quantum radar based on the entangled light source can overcome the limitations of low imaging resolution and low confidentiality in traditional target detection. Therefore, high-precision positioning and high-resolution imaging are the research focus of the quantum radar sensing network. Based on this, we first design and optimize an optical path structure of the quantum entangled light source to obtain higher brightness entangled source which is suitable for complex atmospheric environments. Second, in response to the problem of low positioning accuracy in the traditional quantum radar, we design a new positioning optical path and propose a novel entangled optical quantum positioning method based on the photon scattering model. Third, to address the problems of low resolution and slow speed in traditional quantum radar imaging, we propose a new entangled light quantum imaging method based on two-phase coincidence counting. Finally, we conduct extensive experiments to evaluate the effectiveness of the proposed method in complex atmospheric environments and further provide possibilities for the entangled light source quantum radar sensing network.
Quantum remote sensing, also known as Quantum Detection and Ranging (QUDAR), is the use of entangled photon states to detect targets at a stand-off distance. It inherently relies on sending many single photons through free space, bouncing off of a target and returning to the sensor. It is therefore necessary to understand how single photons interact and scatter from targets of macroscopic size. This paper relates quantum and classical scattering in the far field regime. Specifically, we show that due to the photon's position uncertainty, the path over which the photon traverses is not well defined, and this causes quantum interference. The result of this interference exactly replicates classical scattering behavior of electromagnetic waves. We will show that one can exactly derive the classical electric field scattering integral using a purely quantum construction. Although this paper focuses on the context of QUDAR, it is very general to any application involving far-field electromagnetic scattering.
Aiming at the problems of sampling redundancy, insufficient accuracy, and noise sensitivity of traditional quantum depth imaging methods in low-light and long-distance scenes, an entangled light 3-D quantum imaging method based on adaptive depth compression is proposed. This method combines the spatiotemporal correlation and anti-interference characteristics of quantum entangled photon pairs, integrates compressed sensing theory to break through the bottleneck of Nyquist sampling, and achieves efficient imaging by dynamically adjusting the sampling strategy. Based on the time-of-flight difference between signal photons and noise photons, an adaptive algorithm is designed to optimize the sampling integration time and compression measurement matrix of each pixel in real time: the sampling amount is reduced in the high-reflectivity region, and the sampling time is extended in the low-reflectivity region. At the same time, quantum entanglement is used to improve the detection sensitivity of weak light signals. Simulation and experimental results show that the proposed method can significantly reduce the number of sampling operations and imaging time, while maintaining excellent depth estimation accuracy and robustness, and, thus, provide a new technical path for low-light, long-distance, and real-time 3-D imaging.