Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Capture of a continuous beam of Li atoms in a cryogenic, supersonic helium jet.

Michael Borysow, Brady Stoll, Daniel J. Heinzen

Published May 29, 2010• 0 citations
OpenAlex

Related papers

Characterization of a Continuous Supersonic Beam of Tungsten Atoms

Jeongwon Lee, Jinhai Chen, A. E. Leanhardt

APS•Mar 1, 2010•0 citations

A continuous lithium atomic beam source for cryogenic apparatus

Brady Stoll

We have created an atomic beam source of lithium atoms for use in a cryogenic environment. \nThis beam source is expected to provide a \nflux of 10 to the 18 atoms/s. The main features of this source \nare a reservoir chamber of solid lithium heated with heater wire, creating a lithium gas that \ntravels down an ohmically heated tube and exits as an effusive beam. That beam is directed at \na cold supersonic jet of helium. As lithium atoms enter the helium gas they rapidly thermalize \nand become entrained. The design challenges faced included directing the heat load away from \nthe cold elements of the cryogenic chamber, obtaining the correct temperatures to provide the \ndesired \nflux, and measuring the beam as it exited the reservoir. Through the use of laser induced fluorescence, we believe we have observed capture of lithium by the helium jet. Such a beam source \ncan be used to form an intense cold atom source with the potential future application of serving \nas a pump source for an atom laser.

•Jan 1, 2017•0 citations

Pulsed supersonic beam of cold hydrogen atoms

A. S. Belov, S.A. Kubalov, V.E. Kuzik +1 more

Technical Physics Letters•Aug 1, 1984•0 citations

Entrainment of lithium atoms into a supersonic beam and magnetic deceleration

Yu Wei Lu, Lukas Gerhard Georg Gradl, Li-Chung Ha +5 more

Bulletin of the American Physical Society•Jun 8, 2017•0 citations

A high-intensity cold atom source

Michael Borysow

Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser.

•Aug 1, 2012•0 citations

Laser Cooling of Metastable Helium

Ti Chuang

•Jan 1, 1991•0 citations
We have created an atomic beam source of lithium atoms for use in a cryogenic environment. \nThis beam source is expected to provide a \nflux of 10 to the 18 atoms/s. The main features of this source \nare a reservoir chamber of solid lithium heated with heater wire, creating a lithium gas that \ntravels down an ohmically heated tube and exits as an effusive beam. That beam is directed at \na cold supersonic jet of helium. As lithium atoms enter the helium gas they rapidly thermalize \nand become entrained. The design challenges faced included directing the heat load away from \nthe cold elements of the cryogenic chamber, obtaining the correct temperatures to provide the \ndesired \nflux, and measuring the beam as it exited the reservoir. Through the use of laser induced fluorescence, we believe we have observed capture of lithium by the helium jet. Such a beam source \ncan be used to form an intense cold atom source with the potential future application of serving \nas a pump source for an atom laser.
Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser.