Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A continuous lithium atomic beam source for cryogenic apparatus

Brady Stoll

Published Jan 1, 2017• 0 citations
Publisher

Abstract

We have created an atomic beam source of lithium atoms for use in a cryogenic environment. \nThis beam source is expected to provide a \nflux of 10 to the 18 atoms/s. The main features of this source \nare a reservoir chamber of solid lithium heated with heater wire, creating a lithium gas that \ntravels down an ohmically heated tube and exits as an effusive beam. That beam is directed at \na cold supersonic jet of helium. As lithium atoms enter the helium gas they rapidly thermalize \nand become entrained. The design challenges faced included directing the heat load away from \nthe cold elements of the cryogenic chamber, obtaining the correct temperatures to provide the \ndesired \nflux, and measuring the beam as it exited the reservoir. Through the use of laser induced fluorescence, we believe we have observed capture of lithium by the helium jet. Such a beam source \ncan be used to form an intense cold atom source with the potential future application of serving \nas a pump source for an atom laser.

DOI
10.15781/t2319sj3w

Related papers

A high-intensity cold atom source

Michael Borysow

Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser.

•Aug 1, 2012•0 citations

A High Intensity Cold Atom Source

Jeremy Glick, William Huntington, Daniel J. Heinzen

A method for producing a high intensity cold atomic beam is discussed. The method is based on post-nozzle seeding of lithium into a supersonic helium jet.

Conference on Lasers and Electro-Optics•Jan 1, 2024•0 citations

Intense continuous cold-atom source

William Huntington, Jeremy Glick, Michael Borysow +1 more

The authors demonstrate an intense, continuous cold atomic beam generated via postnozzle seeding of a supersonic ${}^{4}$He jet with ${}^{7}$Li atoms, which is comparable to the highest flux sources based on laser cooling. The technique could potentially be widely applicable to any paramagnetic atom or molecule.

arXiv:2208.10584•Physical Review A•Jan 6, 2023•10 citations

A general cold atomic and molecular beam source

Stephen Maxwell, Nathaniel Brahms, Robert deCarvalho +5 more

We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.

Bulletin of the American Physical Society•May 20, 2005•0 citations

Bright, continuous beams of cold free radicals

Jamie Shaw, Daniel McCarron

We demonstrate a cryogenic buffer gas-cooled molecular beam source capable of producing bright, continuous beams of cold and slow free radicals via laser ablation over durations of up to 60 seconds. The source design uses a closed liquid helium reservoir as a large thermal mass to minimize heating and ensure reproducible beam properties during operation. Under typical conditions, the source produces beams of our test species SrF, containing $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ molecules per steradian per second in the $X{\phantom{\rule{0.16em}{0ex}}}^{2}\mathrm{\ensuremath{\Sigma}}(v=0,N=1)$ state with a rotational temperature of 1.0(2) K and a forward velocity of $140\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}$. The beam properties are robust and unchanged for multiple cell exit geometries, but depend critically on the helium buffer gas flow rate, which must be $\ensuremath{\ge}10$ standard cubic centimeters per minute to produce bright, continuous beams of molecules for an ablation repetition rate of 55 Hz.

arXiv:2008.00535•Physical Review A•Oct 21, 2020•18 citations

High-Flux Beam Source for Cold, Slow Atoms or Molecules

Stephen Maxwell, Nathan Brahms, Robert deCarvalho +7 more

We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.

arXiv:physics/0508100•Physical Review Letters•Oct 17, 2005•188 citations
We have created an atomic beam source of lithium atoms for use in a cryogenic environment. \nThis beam source is expected to provide a \nflux of 10 to the 18 atoms/s. The main features of this source \nare a reservoir chamber of solid lithium heated with heater wire, creating a lithium gas that \ntravels down an ohmically heated tube and exits as an effusive beam. That beam is directed at \na cold supersonic jet of helium. As lithium atoms enter the helium gas they rapidly thermalize \nand become entrained. The design challenges faced included directing the heat load away from \nthe cold elements of the cryogenic chamber, obtaining the correct temperatures to provide the \ndesired \nflux, and measuring the beam as it exited the reservoir. Through the use of laser induced fluorescence, we believe we have observed capture of lithium by the helium jet. Such a beam source \ncan be used to form an intense cold atom source with the potential future application of serving \nas a pump source for an atom laser.
Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser.
The authors demonstrate an intense, continuous cold atomic beam generated via postnozzle seeding of a supersonic 4{}^{4}4He jet with 7{}^{7}7Li atoms, which is comparable to the highest flux sources based on laser cooling. The technique could potentially be widely applicable to any paramagnetic atom or molecule.
We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.
We demonstrate a cryogenic buffer gas-cooled molecular beam source capable of producing bright, continuous beams of cold and slow free radicals via laser ablation over durations of up to 60 seconds. The source design uses a closed liquid helium reservoir as a large thermal mass to minimize heating and ensure reproducible beam properties during operation. Under typical conditions, the source produces beams of our test species SrF, containing $5\ifmmode\times\else\texttimes\fi{}{10}^{12}$ molecules per steradian per second in the $X{\phantom{\rule{0.16em}{0ex}}}^{2}\mathrm{\ensuremath{\Sigma}}(v=0,N=1)$ state with a rotational temperature of 1.0(2) K and a forward velocity of 140m/s140\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}140m/s. The beam properties are robust and unchanged for multiple cell exit geometries, but depend critically on the helium buffer gas flow rate, which must be $\ensuremath{\ge}10$ standard cubic centimeters per minute to produce bright, continuous beams of molecules for an ablation repetition rate of 55 Hz.
We demonstrate and characterize a high-flux beam source for cold, slow atoms or molecules. The desired species is vaporized using laser ablation, then cooled by thermalization in a cryogenic cell of buffer gas. The beam is formed by particles exiting a hole in the buffer gas cell. We characterize the properties of the beam (flux, forward velocity, temperature) for both an atom (Na) and a molecule (PbO) under varying buffer gas density, and discuss conditions for optimizing these beam parameters. Our source compares favorably to existing techniques of beam formation, for a variety of applications.