Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser.
We have created an atomic beam source of lithium atoms for use in a cryogenic environment. \nThis beam source is expected to provide a \nflux of 10 to the 18 atoms/s. The main features of this source \nare a reservoir chamber of solid lithium heated with heater wire, creating a lithium gas that \ntravels down an ohmically heated tube and exits as an effusive beam. That beam is directed at \na cold supersonic jet of helium. As lithium atoms enter the helium gas they rapidly thermalize \nand become entrained. The design challenges faced included directing the heat load away from \nthe cold elements of the cryogenic chamber, obtaining the correct temperatures to provide the \ndesired \nflux, and measuring the beam as it exited the reservoir. Through the use of laser induced fluorescence, we believe we have observed capture of lithium by the helium jet. Such a beam source \ncan be used to form an intense cold atom source with the potential future application of serving \nas a pump source for an atom laser.
The authors demonstrate an intense, continuous cold atomic beam generated via postnozzle seeding of a supersonic
4He jet with
7Li atoms, which is comparable to the highest flux sources based on laser cooling. The technique could potentially be widely applicable to any paramagnetic atom or molecule.
We present three-dimensional Monte Carlo simulations of the capture of 1000 K
7Li or 500 K
87Rb atoms by a continuous supersonic
4He jet and show that intense, cold alkali-metal beams form. The simulations use differential cross sections obtained from quantum scattering calculations of
7Li or
87Rb atoms with
4He atoms for relative collision energies between $k\ifmmode\times\else\texttimes\fi{}1$ mK and $k\ifmmode\times\else\texttimes\fi{}3000$ K, where
k is the Boltzmann constant. For collision energies higher than approximately $k\ifmmode\times\else\texttimes\fi{}4$ K the collisions favor forward scattering, deflecting the
7Li or
87Rb atoms by no more than a few degrees. From the simulations, we find that about 1% of the lithium atoms are seeded into the
4He jet, resulting in a lithium beam with a most probable velocity of about
210m/s and number densities on the order of ${10}^{8}\phantom{\rule{4pt}{0ex}}{\mathrm{cm}}^{\ensuremath{-}3}$. Simulations predict narrow yet asymmetric velocity distributions which are verified by comparing to fluorescence measurements of the seeded
7Li atoms. We find agreement between simulated and experimentally measured seeded
7Li densities to be better than 50% across a range of
4He flow rates. We make predictions for seeding efficiency and cooling of
87Rb by a supersonic
4He jet. The seeding efficiency for
87Rb is expected to be similar to
7Li.
This dissertation describes a general approach of generating a high flux of cold atoms that can be confined in a magneto-optical trap. As an alternative to the state-of-the-art laser cooling method, this approach widens our ability to cool and control atoms without relying on a specific atomic transition and availability of laser. In this dissertation I will discuss the design, construction of the experiment and characterization of a pulsed cold atom source in detail. This work is based on a new paradigm: entrainment of atoms in the carrier gas of a supersonic beam, followed by the magnetic deceleration and trapping. Our methodology is based on the supersonic beam created by the expansion of a dense carrier gas from a pulsed release of gas through a small aperture. Cold noble gas emerging from this pulsed high pressure supersonic nozzle acts as a carrier, into which atoms of interest are then entrained. In our studies with the lithium atoms, up to 10¹¹ atoms per pulse could be entrained into a supersonic beam of helium at a translation temperature of below 100 mK. The supersonic valve is typically operated at a rate of below 1 Hz in the experiment. A much larger flux can be achieved at a higher repetition rate. These atoms are moving at a speed of 500 ms⁻¹ and need to be decelerated almost to a complete stop, in order to be trapped and cooled to quantum degeneracy. A 2.5-meter long moving-trap magnetic decelerator with 480 coil pairs was built and characterized. Atoms moving at a speed around 500 ms⁻¹ were trapped and decelerated to various final velocities ranging from 400 ms⁻¹ to 50 ms⁻¹, at a resulting temperature of 30 mK and a flux of 10⁸ ~ 10⁹ atoms per pulse. This whole process takes place within only 10 ms, at a repetition rate of 100 Hz 10¹⁰ ~ 10¹¹ atoms can be delivered per second. This approach is very general compared to the laser cooling, since most atoms in the periodic table have a magnetic moment in their ground state or can be optically pumped to a long-lived para-magnetic metastable state. In this dissertation, I show the working principle of each component of our experiment and characterize the atom beam at multiple stages. I describe in detail the construction and optimization of our magnetic decelerator, and demonstrate the control and monitoring system with the experiment results. Also implemented in this work is a flexible laser system that is composed of a reference diode laser and two tapered amplifiers to control and probe the internal states of atoms, as well as provide the trapping force. I also explore the optical molasses and chirped cooling techniques which help load the atoms into a magneto-optical trap. The successful demonstration of this method of creating a cold atom source leads us to believe that the magnetically decelerated supersonic atoms will play an important role in the area of cold atom physics
We demonstrate an approach for producing a high-flux beam of
7Li4He dimers by performing postnozzle seeding of a lithium beam into a supersonic helium expansion. The molecular beam has a longitudinal temperature of 13(6) mK and a continuous flux on the order of
1011 dimers/s confined within a solid angle of 0.16 sr. Monte Carlo simulations of molecular formation based on
ab initio quantum scattering calculations are carried out and compared to the experimentally observed molecular flux. Extensions of this work could lead towards a more quantitative understanding of few-body collision processes of alkali and helium atoms.