Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Photon number resolvability of multi-pixel superconducting nanowire single photon detectors using a single flux quantum circuit

Hou-Rong Zhou, Kun-Jie Cheng, Jie Ren, Lixing You, Liliang Ying, Xiaoyan Yang, Hao Li, Zhen Wang

Published Nov 15, 2021• 3 citations
Publisher

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of incident photons during a detection event. Multi-pixel SNSPDs employing multiple read-out channels can provide photon number resolvability (PNR), but they require increased cooling power and costly multi-channel electronic systems. In this work, a single-flux quantum (SFQ) circuit is employed, and PNR based on multi-pixel SNSPDs is successfully demonstrated. A multi-input magnetically coupled DC/SFQ converter (MMD2Q) circuit with a mutual inductance M is used to combine and record signals from a multi-pixel SNSPD device. The designed circuit is capable of discriminating the amplitude of the combined signals in accuracy of Φ 0/M with Φ 0 being a single magnetic flux quantum. By employing the MMD2Q circuit, the discrimination of up to 40 photons can be simulated. A 4-parallel-input MMD2Q circuit is fabricated, and a PNR of 3 is successfully demonstrated for an SNSPD array with one channel reserved for the functional verification. The results confirm that an MMD2Q circuit is an effective tool for implementing PNR with multi-pixel SNSPDs.

DOI
10.1088/1674-1056/ac398a

Related papers

SFQ Amplified Circuit for Photon-Number-Resolving SNSPD Array

Kazuki Ota, Masato Naruse, Tohru Taino +4 more

Superconducting nanowire single-photon detectors (SNSPDs) with series-parallel meander-type configuration are demonstrated to have photon-number- resolving (PNR) capabilities. Based on this unique feature, SNSPDs are expected to be used in the evaluation of single photon sources. However, increasing the number of SNSPDs causes an increase in the heat flow and further degradation in the timing jitter. To resolve this problem, the use of single flux quantum (SFQ) logic circuits is proposed. In this study, we present the read-out circuit for the SNSPD array, based on the SFQ logic. Our design of the read- out circuit makes it feasible to simultaneously process six SNSPD signals at 500 MHz and amplify the output voltage as an input to other circuits without the need for any amplifiers. We confirm using simulations that our designed read-out circuit has these capabilities. Furthermore, it is shown that the output voltage increases by 4.8 mV, proportional to the number of SNSPD signals and the output voltage is between 4.8 and 27.8 mV.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•3 citations

Design for superconducting nanowire single-photon detectors for photon number resolution and spatial resolution

Ying Yang, Junquan Guo, Yongliang Xu +3 more

Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.

Sixth Symposium on Novel Optoelectronic Detection Technology and Applications•Feb 17, 2025•0 citations

Single-Flux Quantum Readout Circuits for Photon-Number-Resolving Superconducting Nanowire Single-Photon Detectors

Hiroaki Myoren, Shunsuke Takeda, Masato Naruse +3 more

Superconducting nanowire single-photon detectors (SNSPDs) with series-parallel meander-type configurations are demonstrated to have photon-number-resolving capabilities and are expected to be used for an evaluation system of single-photon generators and/or an energy-resolved fast detector for a new-generation time-of-flight mass spectrometry. In this paper, we present the design, fabrication, and confirmation of correct operations of two kinds of single-flux-quantum (SFQ) digital readout circuits for an SNSPD with a series-parallel meander-type configuration. Assuming a six-parallel meander-type configuration, we designed: a six-level current discriminator using six different magnetically coupled DC/SFQ converter circuits; and a Δ-type A/D converter using a quasi-one-junction SQUID (QOS) comparator with an SFQ feedback loop. For the design of the magnetically coupled inputs, we used a 3-D inductance extraction program FastHenry and the designed circuits were fabricated using a HYPRES 4.5-kA/cm2Nb process and a National Institute of Advanced Industrial Science and Technology (AIST) standard 2.5-kA/cm2Nb process.

IEEE Transactions on Applied Superconductivity•Oct 28, 2014•10 citations

Superconducting nanowire single-photon detector array with pixel-level photon-number resolution

Chenrui Wang, Chaomeng Ding, Jingxue Chen +6 more

We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.

Photonics Research•Aug 28, 2026•0 citations

Improving photon number resolvability of a superconducting nanowire single-photon detector array using a level comparator circuit

Jia Huang, Xingyu Zhang, Weijun Zhang +7 more

Abstract Photon number resolving (PNR) capability is very important in many optical applications, including quantum information processing, fluorescence detection, and few-photon-level ranging and imaging. Superconducting nanowire single-photon detectors (SNSPDs) with a multipixel interleaved architecture give the array an excellent spatial PNR capability. However, the signal-to-noise ratio (SNR) of the PNR (SNRPNR) of the array will be degraded with increasing the element number due to the electronic noise in the readout circuit, which limits the PNR resolution as well as the maximum PNR number. In this study, a 16-element interleaved SNSPD array was fabricated, and the PNR capability of the array was investigated and analyzed. By introducing a level comparator circuit (LCC), the SNRPNR of the detector array was improved over a factor of four. In addition, we performed a statistical analysis of the photon number on this SNSPD array with LCC, showing that the LCC method effectively enhances the PNR resolution. Besides, the system timing jitter of the detector was reduced from 90 ps to 72 ps due to the improved electrical SNR.

arXiv:2312.17589•Superconductor Science and Technology•Apr 9, 2024•9 citations

Cryogenic Signal Processing Using Single-flux-quantum Circuit for High Performance Multi-pixel Superconducting Nanowire Single-photon Detectors

Hirotaka Terai, Shigehito Miki, Taro Yamashita +2 more

Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2017•0 citations
Superconducting nanowire single-photon detectors (SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of incident photons during a detection event. Multi-pixel SNSPDs employing multiple read-out channels can provide photon number resolvability (PNR), but they require increased cooling power and costly multi-channel electronic systems. In this work, a single-flux quantum (SFQ) circuit is employed, and PNR based on multi-pixel SNSPDs is successfully demonstrated. A multi-input magnetically coupled DC/SFQ converter (MMD2Q) circuit with a mutual inductance M is used to combine and record signals from a multi-pixel SNSPD device. The designed circuit is capable of discriminating the amplitude of the combined signals in accuracy of Φ 0/M with Φ 0 being a single magnetic flux quantum. By employing the MMD2Q circuit, the discrimination of up to 40 photons can be simulated. A 4-parallel-input MMD2Q circuit is fabricated, and a PNR of 3 is successfully demonstrated for an SNSPD array with one channel reserved for the functional verification. The results confirm that an MMD2Q circuit is an effective tool for implementing PNR with multi-pixel SNSPDs.
Superconducting nanowire single-photon detectors (SNSPDs) with series-parallel meander-type configuration are demonstrated to have photon-number- resolving (PNR) capabilities. Based on this unique feature, SNSPDs are expected to be used in the evaluation of single photon sources. However, increasing the number of SNSPDs causes an increase in the heat flow and further degradation in the timing jitter. To resolve this problem, the use of single flux quantum (SFQ) logic circuits is proposed. In this study, we present the read-out circuit for the SNSPD array, based on the SFQ logic. Our design of the read- out circuit makes it feasible to simultaneously process six SNSPD signals at 500 MHz and amplify the output voltage as an input to other circuits without the need for any amplifiers. We confirm using simulations that our designed read-out circuit has these capabilities. Furthermore, it is shown that the output voltage increases by 4.8 mV, proportional to the number of SNSPD signals and the output voltage is between 4.8 and 27.8 mV.
Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.
Superconducting nanowire single-photon detectors (SNSPDs) with series-parallel meander-type configurations are demonstrated to have photon-number-resolving capabilities and are expected to be used for an evaluation system of single-photon generators and/or an energy-resolved fast detector for a new-generation time-of-flight mass spectrometry. In this paper, we present the design, fabrication, and confirmation of correct operations of two kinds of single-flux-quantum (SFQ) digital readout circuits for an SNSPD with a series-parallel meander-type configuration. Assuming a six-parallel meander-type configuration, we designed: a six-level current discriminator using six different magnetically coupled DC/SFQ converter circuits; and a Δ-type A/D converter using a quasi-one-junction SQUID (QOS) comparator with an SFQ feedback loop. For the design of the magnetically coupled inputs, we used a 3-D inductance extraction program FastHenry and the designed circuits were fabricated using a HYPRES 4.5-kA/cm2Nb process and a National Institute of Advanced Industrial Science and Technology (AIST) standard 2.5-kA/cm2Nb process.
We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.
Abstract Photon number resolving (PNR) capability is very important in many optical applications, including quantum information processing, fluorescence detection, and few-photon-level ranging and imaging. Superconducting nanowire single-photon detectors (SNSPDs) with a multipixel interleaved architecture give the array an excellent spatial PNR capability. However, the signal-to-noise ratio (SNR) of the PNR (SNRPNR) of the array will be degraded with increasing the element number due to the electronic noise in the readout circuit, which limits the PNR resolution as well as the maximum PNR number. In this study, a 16-element interleaved SNSPD array was fabricated, and the PNR capability of the array was investigated and analyzed. By introducing a level comparator circuit (LCC), the SNRPNR of the detector array was improved over a factor of four. In addition, we performed a statistical analysis of the photon number on this SNSPD array with LCC, showing that the LCC method effectively enhances the PNR resolution. Besides, the system timing jitter of the detector was reduced from 90 ps to 72 ps due to the improved electrical SNR.
Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.