Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)

Cryogenic Signal Processing Using Single-flux-quantum Circuit for High Performance Multi-pixel Superconducting Nanowire Single-photon Detectors

Hirotaka Terai, Shigehito Miki, Taro Yamashita, Shigeyuki Miyajima, Masahiro Yabuno

Published Jan 1, 2017• 0 citations
Publisher

Abstract

Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.

DOI
10.2221/jcsj.52.340

Related papers

Cryogenic Signal Processing based on Single-Flux-Quantum Circuit for Advanced Superconducting Nanostrip Single-Photon Detector Systems

Shigeyuki Miyajima, Hirotaka Terai, Masahiro Yabuno +2 more

A single-flux-quantum circuit is a promising device for a cryogenic signal processor for a superconducting nanostrip single photon detector (SNSPD) due to its high-speed operation, low power dissipation, and low timing jitter. The cryogenic signal processor based on the SFQ circuits can sense the output signals of multi-pixel SNSPDs with low timing jitter in a low temperature stage, which provides an advanced SNSPD system such as a high-count rate system, a two-photon coincidence system, a single-photon imaging system, and so forth. We have developed and demonstrated some SNSPD systems using an SFQ signal processor in a 0.1-W Gifford-McMahon (GM) cryocooler. In this review, we introduce a cryogenic signal processor based on SFQ circuits for advanced SNSPD systems.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Mar 19, 2024•0 citations

Superconducting Single-Flux-Quantum Logic Circuit

Hirotaka Terai, Taro YAMASHITA, Shigehito Miki +2 more

The superconducting single-flux-quantum (SFQ) circuit is the ultimate energy-efficient digital circuit technology. The SFQ circuits are very promising for applications not only to huge systems such as supercomputers and/or high-end routers but also to the signal processing circuit operating with superconducting detectors. We introduce the recent progress in the SFQ circuit technology focusing on the application combined with superconducting single-photon detectors (SSPDs). The four-pixel SSPD array was successfully operated with the SFQ signal processing circuit in the 0.1 W Gifford McMahon refrigerator.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2013•0 citations

Crosstalk-free operation of multielement superconducting nanowire single-photon detector array integrated with single-flux-quantum circuit in a 01 W Gifford–McMahon cryocooler

Taro Yamashita, Shigehito Miki, Hirotaka Terai +2 more

We demonstrate the successful operation of a multielement superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems.

arXiv:1207.3902•Optics Letters•Jul 13, 2012•47 citations

Readout Electronics Using Single-Flux-Quantum Circuit Technology for Superconducting Single-Photon Detector Array

Hirotaka Terai, Shigehito Miki, Zhen Wang

Superconducting single-photon detectors (SSPDs) based on NbN nanowires possess properties such as high counting rate, low dark count rate and small timing jitter, which are promising characteristics for a quantum key distribution system. An SSPD array has recently attracted attention, because it can provide a higher counting rate, and spatial and photon-number resolutions. We propose readout electronics using single-flux-quantum (SFQ) circuits to process a large number of output signals from an SSPD array. We designed and tested an interface circuit between an SSPD and SFQ circuit, and successfully observed SFQ pulse generation for an input pulse with a current amplitude of 17.4 ~ 36.4 muA , which is comparable with an output current amplitude of the SSPD. The interface circuit was also operational for an input pulse duration of 1.6 ns, which is shorter than the typical recovery time of the SSPD.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•63 citations

Characterisation of multi-pixel superconducting nanowire single photon detectors

Jeroen Swens

Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.

•Jan 1, 2018•0 citations

Superconducting Nanowire Single-photon Detector

Taro Yamashita, Shigehito Miki, Zhen Wang +1 more

We present our recent progress in development of a superconducting nanowire single-photon detector (SSPD) system. Our practical SSPD system with a compactGifford-McMahon cryocooler successfully achieved the high system detection efficiency of 74%, low dark count of 100 cps, and small timing jitter of 68 ps in one device simultaneously, which is useful for actual applications. Furthermore, we propose and demonstrate a new strategy to resolve a trade-off problem between the system detection efficiency and counting rate (speed) in the SSPD.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2014•3 citations
Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.
A single-flux-quantum circuit is a promising device for a cryogenic signal processor for a superconducting nanostrip single photon detector (SNSPD) due to its high-speed operation, low power dissipation, and low timing jitter. The cryogenic signal processor based on the SFQ circuits can sense the output signals of multi-pixel SNSPDs with low timing jitter in a low temperature stage, which provides an advanced SNSPD system such as a high-count rate system, a two-photon coincidence system, a single-photon imaging system, and so forth. We have developed and demonstrated some SNSPD systems using an SFQ signal processor in a 0.1-W Gifford-McMahon (GM) cryocooler. In this review, we introduce a cryogenic signal processor based on SFQ circuits for advanced SNSPD systems.
The superconducting single-flux-quantum (SFQ) circuit is the ultimate energy-efficient digital circuit technology. The SFQ circuits are very promising for applications not only to huge systems such as supercomputers and/or high-end routers but also to the signal processing circuit operating with superconducting detectors. We introduce the recent progress in the SFQ circuit technology focusing on the application combined with superconducting single-photon detectors (SSPDs). The four-pixel SSPD array was successfully operated with the SFQ signal processing circuit in the 0.1 W Gifford McMahon refrigerator.
We demonstrate the successful operation of a multielement superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems.
Superconducting single-photon detectors (SSPDs) based on NbN nanowires possess properties such as high counting rate, low dark count rate and small timing jitter, which are promising characteristics for a quantum key distribution system. An SSPD array has recently attracted attention, because it can provide a higher counting rate, and spatial and photon-number resolutions. We propose readout electronics using single-flux-quantum (SFQ) circuits to process a large number of output signals from an SSPD array. We designed and tested an interface circuit between an SSPD and SFQ circuit, and successfully observed SFQ pulse generation for an input pulse with a current amplitude of 17.4 ~ 36.4 muA , which is comparable with an output current amplitude of the SSPD. The interface circuit was also operational for an input pulse duration of 1.6 ns, which is shorter than the typical recovery time of the SSPD.
Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.
We present our recent progress in development of a superconducting nanowire single-photon detector (SSPD) system. Our practical SSPD system with a compactGifford-McMahon cryocooler successfully achieved the high system detection efficiency of 74%, low dark count of 100 cps, and small timing jitter of 68 ps in one device simultaneously, which is useful for actual applications. Furthermore, we propose and demonstrate a new strategy to resolve a trade-off problem between the system detection efficiency and counting rate (speed) in the SSPD.