Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Sixth Symposium on Novel Optoelectronic Detection Technology and Applications

Design for superconducting nanowire single-photon detectors for photon number resolution and spatial resolution

Ying Yang, Junquan Guo, Yongliang Xu, Jiliang Yang, Yunkun Zhao, Kemi Xu

Published Feb 17, 2025• 0 citations
Publisher

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.

DOI
10.1117/12.3057128

Related papers

Characterisation of multi-pixel superconducting nanowire single photon detectors

Jeroen Swens

Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.

•Jan 1, 2018•0 citations

Photon number resolvability of multi-pixel superconducting nanowire single photon detectors using a single flux quantum circuit

Hou-Rong Zhou, Kun-Jie Cheng, Jie Ren +5 more

Superconducting nanowire single-photon detectors (SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of incident photons during a detection event. Multi-pixel SNSPDs employing multiple read-out channels can provide photon number resolvability (PNR), but they require increased cooling power and costly multi-channel electronic systems. In this work, a single-flux quantum (SFQ) circuit is employed, and PNR based on multi-pixel SNSPDs is successfully demonstrated. A multi-input magnetically coupled DC/SFQ converter (MMD2Q) circuit with a mutual inductance M is used to combine and record signals from a multi-pixel SNSPD device. The designed circuit is capable of discriminating the amplitude of the combined signals in accuracy of Φ 0/M with Φ 0 being a single magnetic flux quantum. By employing the MMD2Q circuit, the discrimination of up to 40 photons can be simulated. A 4-parallel-input MMD2Q circuit is fabricated, and a PNR of 3 is successfully demonstrated for an SNSPD array with one channel reserved for the functional verification. The results confirm that an MMD2Q circuit is an effective tool for implementing PNR with multi-pixel SNSPDs.

Chinese Physics B•Nov 15, 2021•3 citations

Superconducting nanowire single-photon detector array with pixel-level photon-number resolution

Chenrui Wang, Chaomeng Ding, Jingxue Chen +6 more

We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.

Photonics Research•Aug 28, 2026•0 citations

Fast High-Efficiency Photon-Number-Resolving Parallel Superconducting Nanowire Single-Photon Detector

Lorenzo Stasi, Gaëtan Gras, Riad Berrazouane +3 more

Photon-number-resolving (PNR) single-photon detectors are an enabling technology in many areas, such as photonic quantum computing, nonclassical light-source characterization, and quantum imaging.Here, we demonstrate high-efficiency PNR detectors using a parallel superconducting nanowire singlephoton-detector (P-SNSPD) architecture that does not suffer from crosstalk between the pixels and that is free of latching.The behavior of the detector is modeled and used to predict the possible outcomes given a certain number of incoming photons.We apply our model to a four-pixel P-SNSPD with a system detection efficiency of 92.5%.We also demonstrate how this detector allows reconstructing the photonnumber statistics of a coherent source of light, which paves the way towards the characterization of the photon statistics of other types of light source using a single detector.

arXiv:2207.14538•Physical Review Applied•Jun 13, 2023•44 citations

Engineering superconducting single-photon detectors for quantum technologies

Shuyu Dong

Superconducting nanowire single-photon detectors (SNSPDs) are renowned for their high detection efficiency, low dark count rate, and fast timing resolution, which have emerged as an essential device in quantum technologies, including quantum computing and communication, which also significantly benefits classical applications such as deep-space communication, neuromorphic computing, and light detection and ranging (LiDAR). However, designing and customizing SNSPD into versatile functionalities to satisfy these intensive requirements poses significant challenges, including thin-film deposition, nanofabrication, electrical integration, and light delivery strategies. While prior work has typically optimized individual steps – such as fabrication or characterization – there is a lack of reported systematic, integrated frameworks that span all stages from device design to performance benchmarking. This gap hinders broader adoption of the technology across scientific and industrial communities and limits the rigorous exploration of advanced detection concepts. This thesis aims to establish an end-to-end workflow for the customizable fabrication and comprehensive characterization of superconducting nanowire single-photon detectors, and to demonstrate that such a platform is essential for the investigation of diverse single-photon detection architectures. It begins with the optimization of NbTiN thin-film deposition utilizing an ultrahigh vacuum sputtering system. By systematically identifying and optimizing key deposition parameters, we achieve NbTiN films with targeted superconducting properties along with high uniformity and reproducibility. This fast and reliable workflow establishes a solid foundation for detector fabrication and provides instructions for flexible control over film properties. Furthermore, effective nanofabrication protocols for the high-quality SNSPDs were elaborated, along with the specialized cryogenic packaging techniques for reliable electrical and optical integration. The achieved devices demonstrated performance metrics comparable to commercial systems. The implementation of this full fabrication—characterization cycle also enabled flexible exploration of advanced detector architectures. For example, we investigated superconducting microbridge single-photon detectors (SMSPDs) as a complementary platform, demonstrating a fivefold enhancement in signal-to-noise ratio and a tenfold reduction in recovery time relative to conventional SNSPDs. These results provide quantitative insight into detector design trade-offs. Within this framework, photon-number-resolving (PNR) detection using SNSPDs was further investigated as an essential function for advanced quantum and classical applications. We presented innovative detector architectures—interleaved multi-pixel arrays and multilayer coherent absorption structures—to overcome limitations inherent in conventional multiplexing methods, such as nonuniform detection, temporal degradation, and crosstalk. An interleaved multi-pixel SNSPD array with up to four-photon resolution was achieved with uniform detection, as well as a multilayer architecture based on coherent absorption with uniform and near-unity absorption efficiency. Importantly, a theoretical comparison between these two architectures was conducted to evaluate their absorption efficiency and PNR performance, offering insights into structural optimization and device scalability for advanced PNR detectors. Overall, this thesis establishes a fully in-house SNSPD fabrication and characterization capability, providing a robust foundation for the development, customization, and evaluation of high-performance superconducting single-photon detectors. This platform enables reproducible design optimization, quantitative performance benchmarking, and systematic exploration of detector architectures. By integrating fabrication, characterization, and architectural innovation within a consistent workflow, it facilitates both fundamental investigation and application-driven advancement of single-photon detection technologies in our laboratory and the broader research community in Singapore.

•Jan 1, 2025•0 citations

SNSPD with parallel nanowires (Conference Presentation)

Mikkel Ejrnaes, L. Parlato, Alessandro Gaggero +4 more

Superconducting nanowire single-photon detectors (SNSPDs) have shown to be promising in applications such as quantum communication and computation, quantum optics, imaging, metrology and sensing. They offer the advantages of a low dark count rate, high efficiency, a broadband response, a short time jitter, a high repetition rate, and no need for gated-mode operation. Several SNSPD designs have been proposed in literature. Here, we discuss the so-called parallel nanowires configurations. They were introduced with the aim of improving some SNSPD property like detection efficiency, speed, signal-to-noise ratio, or photon number resolution. Although apparently similar, the various parallel designs are not the same. There is no one design that can improve the mentioned properties all together. In fact, each design presents its own characteristics with specific advantages and drawbacks. In this work, we will discuss the various designs outlining peculiarities and possible improvements.

•Jun 8, 2017•0 citations
Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.
Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.
Superconducting nanowire single-photon detectors (SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of incident photons during a detection event. Multi-pixel SNSPDs employing multiple read-out channels can provide photon number resolvability (PNR), but they require increased cooling power and costly multi-channel electronic systems. In this work, a single-flux quantum (SFQ) circuit is employed, and PNR based on multi-pixel SNSPDs is successfully demonstrated. A multi-input magnetically coupled DC/SFQ converter (MMD2Q) circuit with a mutual inductance M is used to combine and record signals from a multi-pixel SNSPD device. The designed circuit is capable of discriminating the amplitude of the combined signals in accuracy of Φ 0/M with Φ 0 being a single magnetic flux quantum. By employing the MMD2Q circuit, the discrimination of up to 40 photons can be simulated. A 4-parallel-input MMD2Q circuit is fabricated, and a PNR of 3 is successfully demonstrated for an SNSPD array with one channel reserved for the functional verification. The results confirm that an MMD2Q circuit is an effective tool for implementing PNR with multi-pixel SNSPDs.
We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.
Photon-number-resolving (PNR) single-photon detectors are an enabling technology in many areas, such as photonic quantum computing, nonclassical light-source characterization, and quantum imaging.Here, we demonstrate high-efficiency PNR detectors using a parallel superconducting nanowire singlephoton-detector (P-SNSPD) architecture that does not suffer from crosstalk between the pixels and that is free of latching.The behavior of the detector is modeled and used to predict the possible outcomes given a certain number of incoming photons.We apply our model to a four-pixel P-SNSPD with a system detection efficiency of 92.5%.We also demonstrate how this detector allows reconstructing the photonnumber statistics of a coherent source of light, which paves the way towards the characterization of the photon statistics of other types of light source using a single detector.
Superconducting nanowire single-photon detectors (SNSPDs) are renowned for their high detection efficiency, low dark count rate, and fast timing resolution, which have emerged as an essential device in quantum technologies, including quantum computing and communication, which also significantly benefits classical applications such as deep-space communication, neuromorphic computing, and light detection and ranging (LiDAR). However, designing and customizing SNSPD into versatile functionalities to satisfy these intensive requirements poses significant challenges, including thin-film deposition, nanofabrication, electrical integration, and light delivery strategies. While prior work has typically optimized individual steps – such as fabrication or characterization – there is a lack of reported systematic, integrated frameworks that span all stages from device design to performance benchmarking. This gap hinders broader adoption of the technology across scientific and industrial communities and limits the rigorous exploration of advanced detection concepts. This thesis aims to establish an end-to-end workflow for the customizable fabrication and comprehensive characterization of superconducting nanowire single-photon detectors, and to demonstrate that such a platform is essential for the investigation of diverse single-photon detection architectures. It begins with the optimization of NbTiN thin-film deposition utilizing an ultrahigh vacuum sputtering system. By systematically identifying and optimizing key deposition parameters, we achieve NbTiN films with targeted superconducting properties along with high uniformity and reproducibility. This fast and reliable workflow establishes a solid foundation for detector fabrication and provides instructions for flexible control over film properties. Furthermore, effective nanofabrication protocols for the high-quality SNSPDs were elaborated, along with the specialized cryogenic packaging techniques for reliable electrical and optical integration. The achieved devices demonstrated performance metrics comparable to commercial systems. The implementation of this full fabrication—characterization cycle also enabled flexible exploration of advanced detector architectures. For example, we investigated superconducting microbridge single-photon detectors (SMSPDs) as a complementary platform, demonstrating a fivefold enhancement in signal-to-noise ratio and a tenfold reduction in recovery time relative to conventional SNSPDs. These results provide quantitative insight into detector design trade-offs. Within this framework, photon-number-resolving (PNR) detection using SNSPDs was further investigated as an essential function for advanced quantum and classical applications. We presented innovative detector architectures—interleaved multi-pixel arrays and multilayer coherent absorption structures—to overcome limitations inherent in conventional multiplexing methods, such as nonuniform detection, temporal degradation, and crosstalk. An interleaved multi-pixel SNSPD array with up to four-photon resolution was achieved with uniform detection, as well as a multilayer architecture based on coherent absorption with uniform and near-unity absorption efficiency. Importantly, a theoretical comparison between these two architectures was conducted to evaluate their absorption efficiency and PNR performance, offering insights into structural optimization and device scalability for advanced PNR detectors. Overall, this thesis establishes a fully in-house SNSPD fabrication and characterization capability, providing a robust foundation for the development, customization, and evaluation of high-performance superconducting single-photon detectors. This platform enables reproducible design optimization, quantitative performance benchmarking, and systematic exploration of detector architectures. By integrating fabrication, characterization, and architectural innovation within a consistent workflow, it facilitates both fundamental investigation and application-driven advancement of single-photon detection technologies in our laboratory and the broader research community in Singapore.
Superconducting nanowire single-photon detectors (SNSPDs) have shown to be promising in applications such as quantum communication and computation, quantum optics, imaging, metrology and sensing. They offer the advantages of a low dark count rate, high efficiency, a broadband response, a short time jitter, a high repetition rate, and no need for gated-mode operation. Several SNSPD designs have been proposed in literature. Here, we discuss the so-called parallel nanowires configurations. They were introduced with the aim of improving some SNSPD property like detection efficiency, speed, signal-to-noise ratio, or photon number resolution. Although apparently similar, the various parallel designs are not the same. There is no one design that can improve the mentioned properties all together. In fact, each design presents its own characteristics with specific advantages and drawbacks. In this work, we will discuss the various designs outlining peculiarities and possible improvements.