Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Probing unconventional performance of fiber resonators: light storage, generation and manipulation

Ivan Cardea

Published Jan 1, 2021• 0 citations
Publisher

Abstract

This thesis aims at investigating the performance of figure-9 (figure-of-nine) optical fiber resonators as a practical solution for light storage, light generation and manipulation. The first part of the thesis focuses on a theoretical and experimental study describing the performance of the figure-9 laser as a function of different coupling strengths and output coupling conditions. The study provides new insights on Sagnac interferometer-based fiber lasers, which can be useful also for other types of cavities that include this structure, such as the figure-8 (figure-of-eight) or the theta cavity laser. The work on the figure-9 laser is then followed by a generalized theoretical model, validated by numerical results, to demonstrate that resonant systems with a decoupled input and output energy rates can exhibit an arbitrarily high time-bandwidth performance, thus providing a longer delay/storage time. The developed model shows that the time-bandwidth product (TBP) of such a resonant system is only limited by the cavity finesse. This description fits with the time-bandwidth limit (TBL), which states that the cavity bandwidth $\Delta \omega_{\mathrm{cav}}$ is the inverse of the photon lifetime $\tau$ (i.e. $\Delta \omega_{\mathrm{cav}}\cdot \tau=1$), only when the resonator is reciprocal. The results also show that a longer storage time is accompanied by a significant improvement of the intra-cavity power enhancement, with respect to that provided by a reciprocal resonator, which is strongly desirable in all the applications that demand high efficiency in nonlinear processes. By comparing the total power enhancement in the reciprocal and nonreciprocal case, we prove that the TBP can be used as a figure of merit that characterizes the gain of total power enhancement, attained over one free spectral range (FSR) through nonreciprocal coupling, with respect to the reciprocal case considering the same amount of in-coupled power. The model is then used as a reference for an experimental implementation of such a system, at telecommunication wavelengths (around $1.55\,\mathrm{\mu m}$), using a time-variant figure-9 cavity. The results report a TBP that exceeds by a factor of 30 the TBL and is limited only by experimental constraints of the setup used. Lastly, the Sagnac interferometer in the context of generation of light is explored as to achieve electro-optic comb generation with a flat-topped spectral shape.

DOI
10.5075/epfl-thesis-10466

Related papers

Unconventional time-bandwidth performance of resonant cavities with nonreciprocal coupling

Ivan Cardea, Davide Grassani, Jeremy Upham +3 more

The time-bandwidth limit is a mathematical tenet that affects all reciprocal resonators, stating that the product of the spectral bandwidth that can couple into a resonant system and its characteristic energy decay time is always equal to 1. Here, we develop an analytical and numerical model to show that introducing nonreciprocal coupling to a generalized resonator changes the power balance between the reflected and intracavity fields, which consequently overcomes the time-bandwidth limit of the resonant system. By performing a full evaluation of the time-bandwidth product (TBP) of the modeled resonator, we show that it represents a measure of the increased delay imparted to a light wave, with respect to what the bandwidth of the reciprocal resonant structure would allow to the same amount of in-coupled power. No longer restricted to the value 1, we show that the TBP can instead be used as a figure of merit of the improvement in intracavity power enhancement due to the nonreciprocal coupling.

Physical Review A•Jan 12, 2021•4 citations

Arbitrarily high time bandwidth performance in a nonreciprocal optical resonator with broken time invariance

Ivan Cardea, Davide Grassani, Simon J. Fabbri +6 more

Most present-day resonant systems, throughout physics and engineering, are characterized by a strict time-reversal symmetry between the rates of energy coupled in and out of the system, which leads to a trade-off between how long a wave can be stored in the system and the system's bandwidth. Any attempt to reduce the losses of the resonant system, and hence store a (mechanical, acoustic, electronic, optical, or of any other nature) wave for more time, will inevitably also reduce the bandwidth of the system. Until recently, this time-bandwidth limit has been considered fundamental, arising from basic Fourier reciprocity. In this work, using a simple macroscopic, fiber-optic resonator where the nonreciprocity is induced by breaking its time-invariance, we report, in full agreement with accompanying numerical simulations, a time-bandwidth product (TBP) exceeding the 'fundamental' limit of ordinary resonant systems by a factor of 30. We show that, although in practice experimental constraints limit our scheme, the TBP can be arbitrarily large, simply dictated by the finesse of the cavity. Our results open the path for designing resonant systems, ubiquitous in physics and engineering, that can simultaneously be broadband and possessing long storage times, thereby offering a potential for new functionalities in wave-matter interactions.

arXiv:1903.08386•Scientific Reports•Sep 25, 2020•6 citations

High finesse optical fiber cavities: optimal alignment and robust stabilization (Conference Presentation)

Lothar Ratschbacher, Jose Gallego, Sutapa Ghosh +4 more

Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.

•Aug 3, 2016•0 citations

Practical schemes for quantum memories

E. S. Moiseev

This dissertation is devoted to the development of quantum memories for light. Quantum memory is an important part of future long-distance quantum fiber networks and quantum processing. Quantum memory is required to be efficient, multimode, noise free, scalable, and should be able to provide long storage times for practical applications in quantum communications and beyond. Here I concentrate on solving particular problems of different quantum protocols and find ways for extending the performance of memories and adding new capabilities. I theoretically show that an array of whispering-gallery resonators is capable of being an efficient and noise-free optical memory with an adjustable storage time. The potential for on-chip realization at room temperature makes the scheme attractive for easy implementation. The effect of Raman scattering in echo memory was evaluated experimentally and theoretically. The noise performance of gradient echo memory in Λ configuration proves, that the developed theory is in a good agreement with an experiment. I proposed a mechanism for extending the bandwidth of impedance-matched memories via a white-light cavity effect. The introduced additional dispersion compensates a bandwidth decrease induced by the cavity and hence increases the spectral zone of impedance matching. Theoretically the scheme allows to increase the bandwidth of high efficient storage (>90%) several times without adding extra noise. Finally, I have proposed an architecture of quantum random-access memory for time-bin photons. The architecture consists from a memory unit and a strongly coupled three-level atom. Both of them are placed in their own cavities, which are coupled to each other. The protocol allows to achieve quantum addressing of quantum information stored in the memory with only a single control unit. This is useful for numerous tasks in quantum machine learning.

•Aug 1, 2020•0 citations

Strong Coupling between Small Atomic Ensembles and an Open Fiber Cavity

G Manuel Fernández, Carmena Jose

In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.

•Apr 12, 2018•3 citations

Slow and fast light in multiple-beam interferometers, mono- and multi-layer systems

A. Sánchez-Meroño

This Thesis lies within the field of Slow and Fast Light (SFL) technologies, which are\n\t\t\t\t currently receiving much attention because of their interesting applications, ranging from\n\t\t\t\t optical information processing to enhanced precision sensing and interferometry. These\n\t\t\t\t technologies are based on systems that exhibit steep positive dispersion to propagate a light\n\t\t\t\t pulse at group velocity well below the speed of light in vacuum (slow light) or steep negative\n\t\t\t\t dispersion to achieve pulse propagation at superluminal or even at negative group velocity (fast\n\t\t\t\t light). SFL effects thus arise in a myriad of materials exhibiting spectral resonances. Current\n\t\t\t\t efforts in this field are mainly focused on the manipulation of material gain or absorption\n\t\t\t\t resonances by nonlinear optical processes (material SFL) or on the optimization of photonic\n\t\t\t\t band-gap structures, without substantial material dispersion, but where structural dispersion\n\t\t\t\t comes as a result of the coupling between the light wavelength and the characteristic length of\n\t\t\t\t the system (structural SFL).This Thesis focuses on the theoretical and experimental analysis of electromagnetic pulse\n\t\t\t\t propagation with abnormal group velocities in two kind of linear and passive devices. In the\n\t\t\t\t first part of the Thesis a new system exhibiting structural SFL is demonstrated. It deals with\n\t\t\t\t multiple-beam interferometers and provides a comprehensive study of the arising of SFL in\n\t\t\t\t this system devoid of photonic band gaps. A theoretical model that fully describes the allowed\n\t\t\t\t pulse propagation regimes and its performance in terms of both the interferometer’s and the\n\t\t\t\t pulse characteristics is developed. Considering amplitude modulated pulses, the capabilities\n\t\t\t\t and limitations of SFL effects in this kind of system are retrieved by quantifying typical figures\n\t\t\t\t of merit like fractional delay, pulse distortion and Delay-Bandwidth Product. The theoretical\n\t\t\t\t framework is valid for any frequency region and the model predictions are probed by performing experiments in the radiofrequency range and through exact numerical simulations in the optical\n\t\t\t\t range. The simplest interferometer, with only two branches, is first considered since it is widely\n\t\t\t\t used in actual communication systems. It is analytically demonstrated that slow light cannot\n\t\t\t\t possibly be sustained and that the total attenuation drives the changes in the pulse propagation\n\t\t\t\t regimes. By increasing the number of branches, group delay tuning from slow to fast light\n\t\t\t\t regimes occurs if the optical length of one of the branches is slightly changed.In the second part of the Thesis, the ability of mono- and multilayer structures to speed up\n\t\t\t\t or slow down electromagnetic pulses is investigated, with special emphasis on their reflection\n\t\t\t\t properties. Namely, Distributed Bragg Reflectors (DBRs) and Fabry-Perot filters, common in\n\t\t\t\t today’s communication systems, are examined. These structures were fabricated to operate\n\t\t\t\t in the microwave and in the radiofrequency range with the aim of confirming theoretical\n\t\t\t\t predictions. Experimental results of their frequency- and time-domain characterization are\n\t\t\t\t compared with simulations. An advantage of operating in these frequency ranges is that the\n\t\t\t\t transmission and reflection phase function can be measured with a two port vector network\n\t\t\t\t analyzer. Such a simple measurement of this key function that determines the pulse propagation\n\t\t\t\t regime cannot be directly performed in the optical range. Moreover, microstrip DBRs\n\t\t\t\t were designed and their potential application as a negative group-delay circuit to improve\n\t\t\t\t the efficiency of feedforward amplifiers, which are commonly used for cancelling inherent\n\t\t\t\t distortion in microwave amplifiers, is explored.

•Apr 21, 2015•0 citations
This thesis aims at investigating the performance of figure-9 (figure-of-nine) optical fiber resonators as a practical solution for light storage, light generation and manipulation. The first part of the thesis focuses on a theoretical and experimental study describing the performance of the figure-9 laser as a function of different coupling strengths and output coupling conditions. The study provides new insights on Sagnac interferometer-based fiber lasers, which can be useful also for other types of cavities that include this structure, such as the figure-8 (figure-of-eight) or the theta cavity laser. The work on the figure-9 laser is then followed by a generalized theoretical model, validated by numerical results, to demonstrate that resonant systems with a decoupled input and output energy rates can exhibit an arbitrarily high time-bandwidth performance, thus providing a longer delay/storage time. The developed model shows that the time-bandwidth product (TBP) of such a resonant system is only limited by the cavity finesse. This description fits with the time-bandwidth limit (TBL), which states that the cavity bandwidth Δωcav\Delta \omega_{\mathrm{cav}}Δωcav​ is the inverse of the photon lifetime τ\tauτ (i.e. Δωcav⋅τ=1\Delta \omega_{\mathrm{cav}}\cdot \tau=1Δωcav​⋅τ=1), only when the resonator is reciprocal. The results also show that a longer storage time is accompanied by a significant improvement of the intra-cavity power enhancement, with respect to that provided by a reciprocal resonator, which is strongly desirable in all the applications that demand high efficiency in nonlinear processes. By comparing the total power enhancement in the reciprocal and nonreciprocal case, we prove that the TBP can be used as a figure of merit that characterizes the gain of total power enhancement, attained over one free spectral range (FSR) through nonreciprocal coupling, with respect to the reciprocal case considering the same amount of in-coupled power. The model is then used as a reference for an experimental implementation of such a system, at telecommunication wavelengths (around 1.55 μm1.55\,\mathrm{\mu m}1.55μm), using a time-variant figure-9 cavity. The results report a TBP that exceeds by a factor of 30 the TBL and is limited only by experimental constraints of the setup used. Lastly, the Sagnac interferometer in the context of generation of light is explored as to achieve electro-optic comb generation with a flat-topped spectral shape.
The time-bandwidth limit is a mathematical tenet that affects all reciprocal resonators, stating that the product of the spectral bandwidth that can couple into a resonant system and its characteristic energy decay time is always equal to 1. Here, we develop an analytical and numerical model to show that introducing nonreciprocal coupling to a generalized resonator changes the power balance between the reflected and intracavity fields, which consequently overcomes the time-bandwidth limit of the resonant system. By performing a full evaluation of the time-bandwidth product (TBP) of the modeled resonator, we show that it represents a measure of the increased delay imparted to a light wave, with respect to what the bandwidth of the reciprocal resonant structure would allow to the same amount of in-coupled power. No longer restricted to the value 1, we show that the TBP can instead be used as a figure of merit of the improvement in intracavity power enhancement due to the nonreciprocal coupling.
Most present-day resonant systems, throughout physics and engineering, are characterized by a strict time-reversal symmetry between the rates of energy coupled in and out of the system, which leads to a trade-off between how long a wave can be stored in the system and the system's bandwidth. Any attempt to reduce the losses of the resonant system, and hence store a (mechanical, acoustic, electronic, optical, or of any other nature) wave for more time, will inevitably also reduce the bandwidth of the system. Until recently, this time-bandwidth limit has been considered fundamental, arising from basic Fourier reciprocity. In this work, using a simple macroscopic, fiber-optic resonator where the nonreciprocity is induced by breaking its time-invariance, we report, in full agreement with accompanying numerical simulations, a time-bandwidth product (TBP) exceeding the 'fundamental' limit of ordinary resonant systems by a factor of 30. We show that, although in practice experimental constraints limit our scheme, the TBP can be arbitrarily large, simply dictated by the finesse of the cavity. Our results open the path for designing resonant systems, ubiquitous in physics and engineering, that can simultaneously be broadband and possessing long storage times, thereby offering a potential for new functionalities in wave-matter interactions.
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.
This dissertation is devoted to the development of quantum memories for light. Quantum memory is an important part of future long-distance quantum fiber networks and quantum processing. Quantum memory is required to be efficient, multimode, noise free, scalable, and should be able to provide long storage times for practical applications in quantum communications and beyond. Here I concentrate on solving particular problems of different quantum protocols and find ways for extending the performance of memories and adding new capabilities. I theoretically show that an array of whispering-gallery resonators is capable of being an efficient and noise-free optical memory with an adjustable storage time. The potential for on-chip realization at room temperature makes the scheme attractive for easy implementation. The effect of Raman scattering in echo memory was evaluated experimentally and theoretically. The noise performance of gradient echo memory in Λ configuration proves, that the developed theory is in a good agreement with an experiment. I proposed a mechanism for extending the bandwidth of impedance-matched memories via a white-light cavity effect. The introduced additional dispersion compensates a bandwidth decrease induced by the cavity and hence increases the spectral zone of impedance matching. Theoretically the scheme allows to increase the bandwidth of high efficient storage (>90%) several times without adding extra noise. Finally, I have proposed an architecture of quantum random-access memory for time-bin photons. The architecture consists from a memory unit and a strongly coupled three-level atom. Both of them are placed in their own cavities, which are coupled to each other. The protocol allows to achieve quantum addressing of quantum information stored in the memory with only a single control unit. This is useful for numerous tasks in quantum machine learning.
In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.
This Thesis lies within the field of Slow and Fast Light (SFL) technologies, which are\n\t\t\t\t currently receiving much attention because of their interesting applications, ranging from\n\t\t\t\t optical information processing to enhanced precision sensing and interferometry. These\n\t\t\t\t technologies are based on systems that exhibit steep positive dispersion to propagate a light\n\t\t\t\t pulse at group velocity well below the speed of light in vacuum (slow light) or steep negative\n\t\t\t\t dispersion to achieve pulse propagation at superluminal or even at negative group velocity (fast\n\t\t\t\t light). SFL effects thus arise in a myriad of materials exhibiting spectral resonances. Current\n\t\t\t\t efforts in this field are mainly focused on the manipulation of material gain or absorption\n\t\t\t\t resonances by nonlinear optical processes (material SFL) or on the optimization of photonic\n\t\t\t\t band-gap structures, without substantial material dispersion, but where structural dispersion\n\t\t\t\t comes as a result of the coupling between the light wavelength and the characteristic length of\n\t\t\t\t the system (structural SFL).This Thesis focuses on the theoretical and experimental analysis of electromagnetic pulse\n\t\t\t\t propagation with abnormal group velocities in two kind of linear and passive devices. In the\n\t\t\t\t first part of the Thesis a new system exhibiting structural SFL is demonstrated. It deals with\n\t\t\t\t multiple-beam interferometers and provides a comprehensive study of the arising of SFL in\n\t\t\t\t this system devoid of photonic band gaps. A theoretical model that fully describes the allowed\n\t\t\t\t pulse propagation regimes and its performance in terms of both the interferometer’s and the\n\t\t\t\t pulse characteristics is developed. Considering amplitude modulated pulses, the capabilities\n\t\t\t\t and limitations of SFL effects in this kind of system are retrieved by quantifying typical figures\n\t\t\t\t of merit like fractional delay, pulse distortion and Delay-Bandwidth Product. The theoretical\n\t\t\t\t framework is valid for any frequency region and the model predictions are probed by performing experiments in the radiofrequency range and through exact numerical simulations in the optical\n\t\t\t\t range. The simplest interferometer, with only two branches, is first considered since it is widely\n\t\t\t\t used in actual communication systems. It is analytically demonstrated that slow light cannot\n\t\t\t\t possibly be sustained and that the total attenuation drives the changes in the pulse propagation\n\t\t\t\t regimes. By increasing the number of branches, group delay tuning from slow to fast light\n\t\t\t\t regimes occurs if the optical length of one of the branches is slightly changed.In the second part of the Thesis, the ability of mono- and multilayer structures to speed up\n\t\t\t\t or slow down electromagnetic pulses is investigated, with special emphasis on their reflection\n\t\t\t\t properties. Namely, Distributed Bragg Reflectors (DBRs) and Fabry-Perot filters, common in\n\t\t\t\t today’s communication systems, are examined. These structures were fabricated to operate\n\t\t\t\t in the microwave and in the radiofrequency range with the aim of confirming theoretical\n\t\t\t\t predictions. Experimental results of their frequency- and time-domain characterization are\n\t\t\t\t compared with simulations. An advantage of operating in these frequency ranges is that the\n\t\t\t\t transmission and reflection phase function can be measured with a two port vector network\n\t\t\t\t analyzer. Such a simple measurement of this key function that determines the pulse propagation\n\t\t\t\t regime cannot be directly performed in the optical range. Moreover, microstrip DBRs\n\t\t\t\t were designed and their potential application as a negative group-delay circuit to improve\n\t\t\t\t the efficiency of feedforward amplifiers, which are commonly used for cancelling inherent\n\t\t\t\t distortion in microwave amplifiers, is explored.