Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Practical schemes for quantum memories

E. S. Moiseev

Published Aug 1, 2020• 0 citations
Publisher

Abstract

This dissertation is devoted to the development of quantum memories for light. Quantum memory is an important part of future long-distance quantum fiber networks and quantum processing. Quantum memory is required to be efficient, multimode, noise free, scalable, and should be able to provide long storage times for practical applications in quantum communications and beyond. Here I concentrate on solving particular problems of different quantum protocols and find ways for extending the performance of memories and adding new capabilities. I theoretically show that an array of whispering-gallery resonators is capable of being an efficient and noise-free optical memory with an adjustable storage time. The potential for on-chip realization at room temperature makes the scheme attractive for easy implementation. The effect of Raman scattering in echo memory was evaluated experimentally and theoretically. The noise performance of gradient echo memory in Λ configuration proves, that the developed theory is in a good agreement with an experiment. I proposed a mechanism for extending the bandwidth of impedance-matched memories via a white-light cavity effect. The introduced additional dispersion compensates a bandwidth decrease induced by the cavity and hence increases the spectral zone of impedance matching. Theoretically the scheme allows to increase the bandwidth of high efficient storage (>90%) several times without adding extra noise. Finally, I have proposed an architecture of quantum random-access memory for time-bin photons. The architecture consists from a memory unit and a strongly coupled three-level atom. Both of them are placed in their own cavities, which are coupled to each other. The protocol allows to achieve quantum addressing of quantum information stored in the memory with only a single control unit. This is useful for numerous tasks in quantum machine learning.

DOI
10.11575/prism/38101

Related papers

High performance solid state quantum memory

Morgan P. Hedges

This thesis demonstrates an efficient quantum memory that for the first time preserves more quantum information than it loses. Beyond this, it describes how even higher efficiency may be realised without sacrificing the other performance characteristics that are required for a practical device. A quantum memory is a device to store and recall the quantum state of light. Such a memory will be required for most applications of the emerging field of quantum information. The closest practical application is quantum repeaters for long distance encryption. A more distant target is quantum computing. Yet demonstrations of quantum memory to date fall far short of the performance required for repeaters, and further short of that for quantum computing. For these applications, high performance will be required in terms of 3 parameters: long storage time, high efficiency, and a large mode-capacity. Prior to this work, the storage time was the only paramter to have been demonstrated near the required level[1], and that only in a classical regime. The primary result of this thesis is to demonst rate a memory with an efficiency close the required level (70% is measured), and confirm its quantum nature with noise measurements. This represents the first quantum memory with efficiency greater than 50% and the first to operate unconditionally above the "no-cloning limit". The demonstration used the same storage medium as for the previous long-term storage experiment (Pr{u00B3}{u207A}:Y{u2082}Si0{u2085} (PrYSO)), and could in principle reach the same long storage times. The technique used is an optical "gradient echo", an optical equivalent to the long studied gradient echo technique used in Nuclear Magnetic Resonance (NMR). Aside from it's practicality for demonstrations, a gradient-echo also offers a powerful handle for manipulating stored light. However it is more complex than related memory techniques because it employs a spatially-varying medium. This becomes crucial when the optical depth (and memory efficiency) is increased; propagation effects mean the light is stored very differently than in other techniques. A simple linear-response model is used to gain insight into this high optical depth regime. As a result, some new properties are identified which may increase the efficiency in practical circumstances and improve flexibility. Of particular note, it's found that the space-dependence can be used to hide one narrow transition with another. This allows the somewhat unintuitive notion that a light pulse can fully traverse a medium without exciting a transition that it is resonant with. The spectral-hiding property has promise to overcome the problem with simultaneously acheiving all three parameters required for quantum memories. The problem is related to the preparation of available rare-earth ion doped materials. To acheive high efficiency and storage times, these require spectral holeburning whose bandwidth is limited by the splittings of spin levels. Methods exist to create high bandwidth delays lines with holeburning[2], but they cannot be efficient or long-lived. By utilising the spectral-hiding property of the gradient echo, methods to overcome this limitation are described for the first time.

•Jan 1, 2011•3 citations

Quantum memories and monolithic resonators

Geoff Campbell

This thesis presents progress towards two complementary goals. The first part discusses our aim of building high-efficiency quantum memories for quantum optical states and exploring the potential of the memory for performing operations as well as for passive storage. The second part presents our work towards developing a compact source of quantum light by fabricating optical resonators from non-linear optical crystals. Our high-efficiency memories operate by storing the information carried by a weak laser field in the coherence between the hyperfine-split electronic energy levels in a vapour of atomic rubidium. We analyse the performance of a three-level gradient echo memory protocol that is used to store and retrieve optical information from the atomic coherence using an off-resonant Raman transition. Using a warm rubidium vapour, we find that the memory preserves the quantum state of the input light better than any classical means of storage could achieve. We also present results showing that trapped, cold atomic vapours provide an increased storage lifetime and analyse the contribution that four-wave-mixing makes to the retrieved light. Both the warm- and cold-atom implementations of the memory are shown to store and recall light with over 80% efficiency. We also present a number of extensions to the basic memory protocol. We demonstrate that the light-atom coupling can be controlled by the bright coupling field that is used to complete the Raman transition. This control is used to perform a beam-splitting operations between two optical pulses that are separated in time. Using frequency-multiplexed states, we show that beam-splitting operations are also possible between optical modes that are separated in frequency. This operation can be extended to perform arbitrary operations by using a series of memories. Finally, we present a high-fidelity memory for dual-rail q-bits encoded across two frequency modes. The resonators that were fabricated to explore compact sources of quantum light demonstrated many of the properties that are required to obtain the stable operation of a quantum source. We demonstrated that non-linear optical crystals can be machined into monolithic resonators that use total internal reflections to confine light. Two geometries were tested, whispering gallery resonators and square travelling wave cavities. Because both types of resonators use total internal reflection instead of dielectric coatings, they feature very low loss rates. Lithium niobate resonators of both types exhibited cavity decay rates that were dominated by bulk absorption in the crystal. The resonators were shown to be frequency tunable using an applied voltage and could be coupled to free-space modes with a tunable coupling rate. We present preliminary results of non-linear frequency conversion in the resonators. We also investigated calcium fluoride and magnesium fluoride resonators for use as high-finesse reference cavities. We report a finesse of 5000 in a calcium fluoride whispering gallery resonator. A square calcium fluoride monolithic resonator was also produce to have a low insertion loss when coupled to a Gaussian free-space mode. We demonstrate a power coupling efficiency of 94% to that resonator. We also present a proposal to use a square lithium niobate resonator as a tunable coupler for a high-finesse calcium fluoride whispering gallery resonator. The coupled resonator system could be used as a compact high-efficiency optical quantum memory.

•Jan 1, 2015•0 citations

Optimisation and applications of a Raman quantum memory for temporal modes of light

J. H. D. Munns

Within any practical proposal for utilising quantum mechanics for information processing whether for the efficient computation of problems intractable by classical methods, or for secure communication; at some stage one must have the means to transfer quantum information between remote nodes of a network. For this, light is the obvious choice. To realise this vision one requires the means to overcome the ``scaling problem'' intrinsic to many photonic-based quantum technologies due to probabilistic operations. It has been identified that optical quantum memories which facilitate the storage and retrieval of quantum states of light are an enabling technology. Another requisite technology to ensure the scalability of a quantum network is the means to interface dissimilar material nodes, which in practice means the translation of quantum light in bandwidth, frequency and temporal shape. The first part of this thesis presents experimental, theoretical and numerical investigations of noise reduction in the Raman memory protocol in thermal caesium vapour, by means of a cavity. To do this, I develop a theoretical description of the cavity memory interaction, along with a model of the atom-cavity system to enable meeting the required resonance conditions. This is followed by a proof-of-concept experimental demonstration, showing suppression of noise in the retrieved state. To conclude this part, I investigate the optimisation of this system and provide a numerical framework for its design, and propose a route towards realising the Raman memory as a practical quantum memory. The second theme is an exploration of the practical application of the Raman memory as an interface for temporal modes of light. I perform a preliminary investigation, and develop characterisation tools, to experimentally verify the modal structure of the memory interaction. This work provides the basis for deploying the Raman memory as a temporal-mode selective device for GHz bandwidth quantum states of light.

•May 1, 2018•0 citations

Towards Efficient Quantum Memories in Rare-Earth-Ion-Doped Solids

A. Amari

This thesis describes experiments aimed at developing a key component in applications such as quantum networks and long-distance quantum communication systems: quantum memories. Quantum memories for light using photon-echo and coherent rephrasing techniques have been developed. The work is carried out on rare-earth-ion-doped inorganic crystals. Several properties are associated with these crystals such as long coherence times and long-lived ground state sublevels that are particularly interesting in connection applications in the area of quantum information science. It is demonstrated the preparation of optical inhomogeneous absorption profiles such that the light only interacts with a specific transition at a selected frequency. Narrow absorbing structures with widths of <100 kHz have been prepared with no absorption in the surrounding spectral interval. Most of the experiments were carried out using Pr3+:Y2SiO5. However, in our search for suitable a Λ-system in the material under consideration, we also performed spectral hole-burning spectroscopy in Nd:Y2SiVO4. As part of the search for host materials for Pr, Pr:La2(WO4)3 crystal was characterized using a variety of methods, such as, hole burning and photon-echoes. Electromagnetically induced transparency was also observed in this crystal. The most important criteria for evaluating quantum memory performance and the most important physical requirements are discussed. After investigating the standard photon echo techniques and controlled reversible inhomogeneous broadening (CRIB) for quantum state storage, we considered an efficient multimode quantum memory protocol; the atomic frequency comb (AFC) protocol. Combs with peaks of widths 100-300 kHz and an optical depth of~ 10 were created by optical pumping inside an emptied region of the inhomogeneous profile of Pr3+:Y2SiO5, allowing us to improve the efficiency of light storage. Light storage combining a photon-echo technique based on an AFC and spin-wave storage have been demonstrated, and an experimental AFC scheme for the storage of weak coherent light pulses in Pr3+:Y2SiO5 is presented. Finally, we have investigated superradiance and slow light effects. Both these effects occur in the high optical depth regime and can influence the memory performance. Under certain conditions superradiance results in the immediate re-emission of the stored light in a single burst of coherent radiation, and inside spectrally structured materials, slow light effects may result when storage is performed.

Lund reports on atomic physics•Jan 1, 2010•0 citations

Quantum memory

Jean-Louis Le Gouët, Sergey A. Moiseev

Interaction of quantum radiation with multi-particle ensembles has sparked off intense research efforts during the past decade. Emblematic of this field is the quantum memory scheme, where a quantum state of light is mapped onto an ensemble of atoms and then recovered in its original shape. While opening new access to the basics of light–atom interaction, quantum memory also appears as a key element for information processing applications, such as linear optics quantum computation and long-distance quantum communication via quantum repeaters. Not surprisingly, it is far from trivial to practically recover a stored quantum state of light and, although impressive progress has already been accomplished, researchers are still struggling to reach this ambitious objective. This special issue provides an account of the state-of-the-art in a fast-moving research area that makes physicists, engineers and chemists work together at the forefront of their discipline, involving quantum fields and atoms in different media, magnetic resonance techniques and material science. Various strategies have been considered to store and retrieve quantum light. The explored designs belong to three main—while still overlapping—classes. In architectures derived from photon echo, information is mapped over the spectral components of inhomogeneously broadened absorption bands, such as those encountered in rare earth ion doped crystals and atomic gases in external gradient magnetic field. Protocols based on electromagnetic induced transparency also rely on resonant excitation and are ideally suited to the homogeneous absorption lines offered by laser cooled atomic clouds or ion Coulomb crystals. Finally off-resonance approaches are illustrated by Faraday and Raman processes. Coupling with an optical cavity may enhance the storage process, even for negligibly small atom number. Multiple scattering is also proposed as a way to enlarge the quantum interaction distance of light with matter. The quest for higher efficiency, better fidelity, broader bandwidth, multimode capacity and longer storage lifetime is pursued in all those approaches, as shown in this special issue. The improvement of quantum memory operation specifically requires in-depth study and control of numerous physical processes leading to atomic decoherence. The present issue reflects the development of rare earth ion doped matrices offering long lifetime superposition states, either as bulk crystals or as optical waveguides. The need for quantum sources and high efficiency detectors at the single photon level is also illustrated. Several papers address the networking of quantum memories either in long-haul cryptography or in the prospect of quantum processing. In this context, much attention has been paid recently to interfacing quantum light with superconducting qubits and with nitrogen-vacancy centers in diamond. Finally, the quantum interfacing of light with matter raises questions on entanglement. The last two papers are devoted to the generation of entanglement by dissipative processes. It is shown that long lifetime entanglement may be built in this way. We hope this special issue will help readers to become familiar with the exciting field of ensemble-based quantum memories and will stimulate them to bring deeper insights and new ideas to this area.

Journal of Physics B Atomic Molecular and Optical Physics•Jun 8, 2012•13 citations

Toward Practical Solid-State Based Quantum Memories

Khabat Heshami

Quantum information processing promises to have transformative impacts on information and communication science and technology. Photonic implementation of quantum information processing is among successful candidates for implementation of quantum computation and is an essential part of quantum communication. Linear optical quantum computation, specifically the KLM scheme, and quantum repeaters are prominent candidates for practical photonic quantum computation and long-distance quantum communication. Quantum memories for photons are key elements for any practical implementation of these schemes. Practical quantum memories require theoretical and experimental investigations into quantum memory protocols and physical systems for implementations. The present thesis is focused on studying new approaches toward practical solid-state based quantum memories. First, I present a proposal for a new quantum memory protocol called the controllable-dipole quantum memory. It represents a protocol, in a two-level system, without any optical control that is shown to be equivalent to the Raman type-quantum memory. Then I include our studies on the quantum memory based on the refractive index modulation of the host medium. It is shown that it can resemble the gradient echo quantum memory without a spatial gradient in the external field. These two protocols can be implemented in rare-earth doped crystals. With regards to using new physical systems, I present a proposal based on nitrogen vacancy centers. This may pave the way toward micron-scale on-chip quantum memories that may contribute to the implementation of integrated quantum photonics. Finally, I studied the precision requirements for the spin echo technique. This technique is necessary to extend the storage time in solid-state quantum memories, in which the coherence times are limited by spin inhomogeneous broadening.

•Jan 1, 2013•0 citations
This dissertation is devoted to the development of quantum memories for light. Quantum memory is an important part of future long-distance quantum fiber networks and quantum processing. Quantum memory is required to be efficient, multimode, noise free, scalable, and should be able to provide long storage times for practical applications in quantum communications and beyond. Here I concentrate on solving particular problems of different quantum protocols and find ways for extending the performance of memories and adding new capabilities. I theoretically show that an array of whispering-gallery resonators is capable of being an efficient and noise-free optical memory with an adjustable storage time. The potential for on-chip realization at room temperature makes the scheme attractive for easy implementation. The effect of Raman scattering in echo memory was evaluated experimentally and theoretically. The noise performance of gradient echo memory in Λ configuration proves, that the developed theory is in a good agreement with an experiment. I proposed a mechanism for extending the bandwidth of impedance-matched memories via a white-light cavity effect. The introduced additional dispersion compensates a bandwidth decrease induced by the cavity and hence increases the spectral zone of impedance matching. Theoretically the scheme allows to increase the bandwidth of high efficient storage (>90%) several times without adding extra noise. Finally, I have proposed an architecture of quantum random-access memory for time-bin photons. The architecture consists from a memory unit and a strongly coupled three-level atom. Both of them are placed in their own cavities, which are coupled to each other. The protocol allows to achieve quantum addressing of quantum information stored in the memory with only a single control unit. This is useful for numerous tasks in quantum machine learning.
This thesis demonstrates an efficient quantum memory that for the first time preserves more quantum information than it loses. Beyond this, it describes how even higher efficiency may be realised without sacrificing the other performance characteristics that are required for a practical device. A quantum memory is a device to store and recall the quantum state of light. Such a memory will be required for most applications of the emerging field of quantum information. The closest practical application is quantum repeaters for long distance encryption. A more distant target is quantum computing. Yet demonstrations of quantum memory to date fall far short of the performance required for repeaters, and further short of that for quantum computing. For these applications, high performance will be required in terms of 3 parameters: long storage time, high efficiency, and a large mode-capacity. Prior to this work, the storage time was the only paramter to have been demonstrated near the required level[1], and that only in a classical regime. The primary result of this thesis is to demonst rate a memory with an efficiency close the required level (70% is measured), and confirm its quantum nature with noise measurements. This represents the first quantum memory with efficiency greater than 50% and the first to operate unconditionally above the "no-cloning limit". The demonstration used the same storage medium as for the previous long-term storage experiment (Pr{u00B3}{u207A}:Y{u2082}Si0{u2085} (PrYSO)), and could in principle reach the same long storage times. The technique used is an optical "gradient echo", an optical equivalent to the long studied gradient echo technique used in Nuclear Magnetic Resonance (NMR). Aside from it's practicality for demonstrations, a gradient-echo also offers a powerful handle for manipulating stored light. However it is more complex than related memory techniques because it employs a spatially-varying medium. This becomes crucial when the optical depth (and memory efficiency) is increased; propagation effects mean the light is stored very differently than in other techniques. A simple linear-response model is used to gain insight into this high optical depth regime. As a result, some new properties are identified which may increase the efficiency in practical circumstances and improve flexibility. Of particular note, it's found that the space-dependence can be used to hide one narrow transition with another. This allows the somewhat unintuitive notion that a light pulse can fully traverse a medium without exciting a transition that it is resonant with. The spectral-hiding property has promise to overcome the problem with simultaneously acheiving all three parameters required for quantum memories. The problem is related to the preparation of available rare-earth ion doped materials. To acheive high efficiency and storage times, these require spectral holeburning whose bandwidth is limited by the splittings of spin levels. Methods exist to create high bandwidth delays lines with holeburning[2], but they cannot be efficient or long-lived. By utilising the spectral-hiding property of the gradient echo, methods to overcome this limitation are described for the first time.
This thesis presents progress towards two complementary goals. The first part discusses our aim of building high-efficiency quantum memories for quantum optical states and exploring the potential of the memory for performing operations as well as for passive storage. The second part presents our work towards developing a compact source of quantum light by fabricating optical resonators from non-linear optical crystals. Our high-efficiency memories operate by storing the information carried by a weak laser field in the coherence between the hyperfine-split electronic energy levels in a vapour of atomic rubidium. We analyse the performance of a three-level gradient echo memory protocol that is used to store and retrieve optical information from the atomic coherence using an off-resonant Raman transition. Using a warm rubidium vapour, we find that the memory preserves the quantum state of the input light better than any classical means of storage could achieve. We also present results showing that trapped, cold atomic vapours provide an increased storage lifetime and analyse the contribution that four-wave-mixing makes to the retrieved light. Both the warm- and cold-atom implementations of the memory are shown to store and recall light with over 80% efficiency. We also present a number of extensions to the basic memory protocol. We demonstrate that the light-atom coupling can be controlled by the bright coupling field that is used to complete the Raman transition. This control is used to perform a beam-splitting operations between two optical pulses that are separated in time. Using frequency-multiplexed states, we show that beam-splitting operations are also possible between optical modes that are separated in frequency. This operation can be extended to perform arbitrary operations by using a series of memories. Finally, we present a high-fidelity memory for dual-rail q-bits encoded across two frequency modes. The resonators that were fabricated to explore compact sources of quantum light demonstrated many of the properties that are required to obtain the stable operation of a quantum source. We demonstrated that non-linear optical crystals can be machined into monolithic resonators that use total internal reflections to confine light. Two geometries were tested, whispering gallery resonators and square travelling wave cavities. Because both types of resonators use total internal reflection instead of dielectric coatings, they feature very low loss rates. Lithium niobate resonators of both types exhibited cavity decay rates that were dominated by bulk absorption in the crystal. The resonators were shown to be frequency tunable using an applied voltage and could be coupled to free-space modes with a tunable coupling rate. We present preliminary results of non-linear frequency conversion in the resonators. We also investigated calcium fluoride and magnesium fluoride resonators for use as high-finesse reference cavities. We report a finesse of 5000 in a calcium fluoride whispering gallery resonator. A square calcium fluoride monolithic resonator was also produce to have a low insertion loss when coupled to a Gaussian free-space mode. We demonstrate a power coupling efficiency of 94% to that resonator. We also present a proposal to use a square lithium niobate resonator as a tunable coupler for a high-finesse calcium fluoride whispering gallery resonator. The coupled resonator system could be used as a compact high-efficiency optical quantum memory.
Within any practical proposal for utilising quantum mechanics for information processing whether for the efficient computation of problems intractable by classical methods, or for secure communication; at some stage one must have the means to transfer quantum information between remote nodes of a network. For this, light is the obvious choice. To realise this vision one requires the means to overcome the ``scaling problem'' intrinsic to many photonic-based quantum technologies due to probabilistic operations. It has been identified that optical quantum memories which facilitate the storage and retrieval of quantum states of light are an enabling technology. Another requisite technology to ensure the scalability of a quantum network is the means to interface dissimilar material nodes, which in practice means the translation of quantum light in bandwidth, frequency and temporal shape. The first part of this thesis presents experimental, theoretical and numerical investigations of noise reduction in the Raman memory protocol in thermal caesium vapour, by means of a cavity. To do this, I develop a theoretical description of the cavity memory interaction, along with a model of the atom-cavity system to enable meeting the required resonance conditions. This is followed by a proof-of-concept experimental demonstration, showing suppression of noise in the retrieved state. To conclude this part, I investigate the optimisation of this system and provide a numerical framework for its design, and propose a route towards realising the Raman memory as a practical quantum memory. The second theme is an exploration of the practical application of the Raman memory as an interface for temporal modes of light. I perform a preliminary investigation, and develop characterisation tools, to experimentally verify the modal structure of the memory interaction. This work provides the basis for deploying the Raman memory as a temporal-mode selective device for GHz bandwidth quantum states of light.
This thesis describes experiments aimed at developing a key component in applications such as quantum networks and long-distance quantum communication systems: quantum memories. Quantum memories for light using photon-echo and coherent rephrasing techniques have been developed. The work is carried out on rare-earth-ion-doped inorganic crystals. Several properties are associated with these crystals such as long coherence times and long-lived ground state sublevels that are particularly interesting in connection applications in the area of quantum information science. It is demonstrated the preparation of optical inhomogeneous absorption profiles such that the light only interacts with a specific transition at a selected frequency. Narrow absorbing structures with widths of <100 kHz have been prepared with no absorption in the surrounding spectral interval. Most of the experiments were carried out using Pr3+:Y2SiO5. However, in our search for suitable a Λ-system in the material under consideration, we also performed spectral hole-burning spectroscopy in Nd:Y2SiVO4. As part of the search for host materials for Pr, Pr:La2(WO4)3 crystal was characterized using a variety of methods, such as, hole burning and photon-echoes. Electromagnetically induced transparency was also observed in this crystal. The most important criteria for evaluating quantum memory performance and the most important physical requirements are discussed. After investigating the standard photon echo techniques and controlled reversible inhomogeneous broadening (CRIB) for quantum state storage, we considered an efficient multimode quantum memory protocol; the atomic frequency comb (AFC) protocol. Combs with peaks of widths 100-300 kHz and an optical depth of~ 10 were created by optical pumping inside an emptied region of the inhomogeneous profile of Pr3+:Y2SiO5, allowing us to improve the efficiency of light storage. Light storage combining a photon-echo technique based on an AFC and spin-wave storage have been demonstrated, and an experimental AFC scheme for the storage of weak coherent light pulses in Pr3+:Y2SiO5 is presented. Finally, we have investigated superradiance and slow light effects. Both these effects occur in the high optical depth regime and can influence the memory performance. Under certain conditions superradiance results in the immediate re-emission of the stored light in a single burst of coherent radiation, and inside spectrally structured materials, slow light effects may result when storage is performed.
Interaction of quantum radiation with multi-particle ensembles has sparked off intense research efforts during the past decade. Emblematic of this field is the quantum memory scheme, where a quantum state of light is mapped onto an ensemble of atoms and then recovered in its original shape. While opening new access to the basics of light–atom interaction, quantum memory also appears as a key element for information processing applications, such as linear optics quantum computation and long-distance quantum communication via quantum repeaters. Not surprisingly, it is far from trivial to practically recover a stored quantum state of light and, although impressive progress has already been accomplished, researchers are still struggling to reach this ambitious objective. This special issue provides an account of the state-of-the-art in a fast-moving research area that makes physicists, engineers and chemists work together at the forefront of their discipline, involving quantum fields and atoms in different media, magnetic resonance techniques and material science. Various strategies have been considered to store and retrieve quantum light. The explored designs belong to three main—while still overlapping—classes. In architectures derived from photon echo, information is mapped over the spectral components of inhomogeneously broadened absorption bands, such as those encountered in rare earth ion doped crystals and atomic gases in external gradient magnetic field. Protocols based on electromagnetic induced transparency also rely on resonant excitation and are ideally suited to the homogeneous absorption lines offered by laser cooled atomic clouds or ion Coulomb crystals. Finally off-resonance approaches are illustrated by Faraday and Raman processes. Coupling with an optical cavity may enhance the storage process, even for negligibly small atom number. Multiple scattering is also proposed as a way to enlarge the quantum interaction distance of light with matter. The quest for higher efficiency, better fidelity, broader bandwidth, multimode capacity and longer storage lifetime is pursued in all those approaches, as shown in this special issue. The improvement of quantum memory operation specifically requires in-depth study and control of numerous physical processes leading to atomic decoherence. The present issue reflects the development of rare earth ion doped matrices offering long lifetime superposition states, either as bulk crystals or as optical waveguides. The need for quantum sources and high efficiency detectors at the single photon level is also illustrated. Several papers address the networking of quantum memories either in long-haul cryptography or in the prospect of quantum processing. In this context, much attention has been paid recently to interfacing quantum light with superconducting qubits and with nitrogen-vacancy centers in diamond. Finally, the quantum interfacing of light with matter raises questions on entanglement. The last two papers are devoted to the generation of entanglement by dissipative processes. It is shown that long lifetime entanglement may be built in this way. We hope this special issue will help readers to become familiar with the exciting field of ensemble-based quantum memories and will stimulate them to bring deeper insights and new ideas to this area.
Quantum information processing promises to have transformative impacts on information and communication science and technology. Photonic implementation of quantum information processing is among successful candidates for implementation of quantum computation and is an essential part of quantum communication. Linear optical quantum computation, specifically the KLM scheme, and quantum repeaters are prominent candidates for practical photonic quantum computation and long-distance quantum communication. Quantum memories for photons are key elements for any practical implementation of these schemes. Practical quantum memories require theoretical and experimental investigations into quantum memory protocols and physical systems for implementations. The present thesis is focused on studying new approaches toward practical solid-state based quantum memories. First, I present a proposal for a new quantum memory protocol called the controllable-dipole quantum memory. It represents a protocol, in a two-level system, without any optical control that is shown to be equivalent to the Raman type-quantum memory. Then I include our studies on the quantum memory based on the refractive index modulation of the host medium. It is shown that it can resemble the gradient echo quantum memory without a spatial gradient in the external field. These two protocols can be implemented in rare-earth doped crystals. With regards to using new physical systems, I present a proposal based on nitrogen vacancy centers. This may pave the way toward micron-scale on-chip quantum memories that may contribute to the implementation of integrated quantum photonics. Finally, I studied the precision requirements for the spin echo technique. This technique is necessary to extend the storage time in solid-state quantum memories, in which the coherence times are limited by spin inhomogeneous broadening.