Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser cooling of a magnetically guided ultra cold atom beam

Anoush Aghajani-Talesh

Published Jan 1, 2014• 9 citations
Publisher

Abstract

This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.

DOI
10.18419/opus-5127

Related papers

Laser cooling of a magnetically guided ultracold atom beam

A Aghajani-Talesh, M Falkenau, Valentin Volchkov +3 more

We report on the transverse laser cooling of a magnetically guided beam of ultracold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section, heat is extracted from the atom beam by a two-dimensional (2D) optical molasses perpendicular to it, resulting in a significant increase in atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that, by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 μK have been achieved, corresponding to an increase in phase space density in the guided beam by more than a factor of 30.

arXiv:1002.0233•New Journal of Physics•Jun 28, 2010•9 citations

A proposal for continuous loading of an optical dipole trap with magnetically guided ultra-cold atoms

Anoush Aghajani-Talesh, Markus Falkenau, Axel Griesmaier +1 more

The capture of a moving atom by a non-dissipative trap, such as an optical dipole trap, requires the removal of the excessive kinetic energy of the atom. In this paper, we develop a mechanism to harvest ultra-cold atoms from a guided atom beam into an optical dipole trap by removing their directed kinetic energy. We propose a continuous loading scheme where this is accomplished via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. We theoretically investigate the application of this scheme to the transfer of ultra-cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap. We discuss the realization of a suitable magnetic field configuration. Based on numerical simulations of the loading process, we analyse the feasibility and efficiency of our loading scheme.

arXiv:0912.2244•Journal of Physics B Atomic Molecular and Optical Physics•Dec 4, 2009•13 citations

An optically guided atomic fountain

Hilary Jane Davies

This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)

•Jan 1, 1999•0 citations

Optical pumping of a dense quantum gas at its limits : continuous Sisyphus cooling and demagnetization cooling towards degeneracy

Valentin Volchkov

In this thesis, I study optical pumping as a powerful cooling tool for trapped ultra-cold atoms in a highly collisional regime. First application of optical pumping is a continuous loading scheme used to transfer atoms from a guided beam into a hybrid trap. Further, I introduce a Sisyphus cooling scheme based on radio-frequency transitions and optical pumping, operating simultaneously to the accumulation of atoms in the trap. The combined scheme of continuous loading and Sisyphus cooling is demonstrated for a large range of initial conditions of the guided atoms. Thereby, I show that collisional thermalization occurs in a steady-state for almost arbitrary initial conditions, provided that the first dissipative step is able to prevent the atom from leaving the trap during its first passage. On the one hand, this scheme could be applied to a wide range of atomic or molecular beams. On the other hand, phase-space density of 4*10^-4 is reached in a continuous operation mode with chromium atoms. In the second part, I investigate demagnetization cooling based on dipolar relaxation collisions driving the thermalization of the internal (spin) and the external (motional) degrees of freedom. In the case of a gas, one has the advantage that the spin degree of freedom can be cooled very efficiently using optical pumping. It is shown, that demagnetization cooling of a gas is more efficient than evaporation cooling in terms of phase-space density gain versus loss of atoms. This allows reaching a temperature of 6uK at a phase-space density of 0.03. It is observed, that both, continuous Sisyphus cooling and demagnetization cooling are limited by a density dependent loss mechanism. I present circumstantial evidence for excited-state collisions as the dominant limiting process. Finally, I discuss possible extensions to the current experimental procedures, possibly allowing reaching quantum degeneracy by optical means only.

•Jan 1, 2013•0 citations

Laser cooling and trapping of atoms in optical and micro-wave electro-magnetic trap

Y.Z. Wang, Jihui Ying, Qinghong Zhou +2 more

Presents work on the realization of Bose-Einstein condensates (BEC) in optical and electro-magnetic traps. We have done some theoretical and experimental work on the project. We have proposed an optical funnel or a hollow beam, which are produced from a short micron-sized hollow optical fiber or a set-up of lenses. The cold atoms extracted from an magneto-optical trap experience effective Sisyphus cooling in the dark hollow beam. We calculate the potential barriers for atomic guiding in the dark hollow beam, and analyze the atomic losses during the guiding process. Inside the hollow beam atoms experience an efficient Sisyphus cooling and repumping-beam induced geometric cooling. We have estimated the total loss rate of the cold atoms, and it shows that an ultracold and dense Rb atomic sample with a 3D temperature of /spl sim/1 K can be obtained and the appearance of an optically-trapped Bose-Einstein condensation may be possible in this optical trap. We have also made a proposal of a micro-wave electro-magnetic trap, which is working at the frequency which is very far from the optical transition of the cold atoms. The trapping force comes from the interaction between the electro-magnetic induced magnetic dipole moment with the electro-magnetic field. Theoretical calculation shows that the force can be used to trap the cold atoms in the trap.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jan 20, 2003•0 citations

Toward an atom laser: Cold atoms in a long, high-gradient magnetic guide

Rahul R. Mhaskar

The propagation of an atomic beam through a 1.7 m long magnetic guide with magnetic field gradient of up to 2.7 kGauss/cm has been demonstrated. The guide is side-loaded with an atomic beam from a Pyramidal MOT Low-velocity Intense Source. The atomic beam observed at the end of the guide has a flux of 3×10e7 atoms/s with a velocity of 1.2 m/s, a transverse temperature of 420±40 μK and a longitudinal temperature of 1 mK. The guided atomic beam was mode-filtered by selective removal of high-energy atoms using radio-frequency coupling to magnetically untrapped states. We found that the phase-space density of the atomic beam was very low for evaporative cooling to be functional. An imaging technique was developed to characterize the guided atomic flow in the presence of a high magnetic field gradient. This technique utilizes the open-channel transition to obtain nearly constant photon yield per atom independent of the location of the atom in the guide, providing a mapping of the fluorescence images to the atomic-density profiles. This technique was theoretically studied using Quantum Monte-Carlo Simulations and validated. A Zeeman slower was constructed and characterized to be used as the primary source of atoms to the magnetic guide. The Zeeman slower output atomic beam has a flux of 3×10e11 atoms/s at a velocity of 40 m/s. We have designed a new injection scheme to transfer atoms from the Zeeman slower to the magnetic guide efficiently. The details of a new method to evaporatively cool atoms in the magnetic guide using surface adsorption are described. Finally, a new guide geometry based on a spiral structure is discussed.

•Jan 1, 2008•1 citation
This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.
We report on the transverse laser cooling of a magnetically guided beam of ultracold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section, heat is extracted from the atom beam by a two-dimensional (2D) optical molasses perpendicular to it, resulting in a significant increase in atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that, by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 μK have been achieved, corresponding to an increase in phase space density in the guided beam by more than a factor of 30.
The capture of a moving atom by a non-dissipative trap, such as an optical dipole trap, requires the removal of the excessive kinetic energy of the atom. In this paper, we develop a mechanism to harvest ultra-cold atoms from a guided atom beam into an optical dipole trap by removing their directed kinetic energy. We propose a continuous loading scheme where this is accomplished via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. We theoretically investigate the application of this scheme to the transfer of ultra-cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap. We discuss the realization of a suitable magnetic field configuration. Based on numerical simulations of the loading process, we analyse the feasibility and efficiency of our loading scheme.
This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)
In this thesis, I study optical pumping as a powerful cooling tool for trapped ultra-cold atoms in a highly collisional regime. First application of optical pumping is a continuous loading scheme used to transfer atoms from a guided beam into a hybrid trap. Further, I introduce a Sisyphus cooling scheme based on radio-frequency transitions and optical pumping, operating simultaneously to the accumulation of atoms in the trap. The combined scheme of continuous loading and Sisyphus cooling is demonstrated for a large range of initial conditions of the guided atoms. Thereby, I show that collisional thermalization occurs in a steady-state for almost arbitrary initial conditions, provided that the first dissipative step is able to prevent the atom from leaving the trap during its first passage. On the one hand, this scheme could be applied to a wide range of atomic or molecular beams. On the other hand, phase-space density of 4*10^-4 is reached in a continuous operation mode with chromium atoms. In the second part, I investigate demagnetization cooling based on dipolar relaxation collisions driving the thermalization of the internal (spin) and the external (motional) degrees of freedom. In the case of a gas, one has the advantage that the spin degree of freedom can be cooled very efficiently using optical pumping. It is shown, that demagnetization cooling of a gas is more efficient than evaporation cooling in terms of phase-space density gain versus loss of atoms. This allows reaching a temperature of 6uK at a phase-space density of 0.03. It is observed, that both, continuous Sisyphus cooling and demagnetization cooling are limited by a density dependent loss mechanism. I present circumstantial evidence for excited-state collisions as the dominant limiting process. Finally, I discuss possible extensions to the current experimental procedures, possibly allowing reaching quantum degeneracy by optical means only.
Presents work on the realization of Bose-Einstein condensates (BEC) in optical and electro-magnetic traps. We have done some theoretical and experimental work on the project. We have proposed an optical funnel or a hollow beam, which are produced from a short micron-sized hollow optical fiber or a set-up of lenses. The cold atoms extracted from an magneto-optical trap experience effective Sisyphus cooling in the dark hollow beam. We calculate the potential barriers for atomic guiding in the dark hollow beam, and analyze the atomic losses during the guiding process. Inside the hollow beam atoms experience an efficient Sisyphus cooling and repumping-beam induced geometric cooling. We have estimated the total loss rate of the cold atoms, and it shows that an ultracold and dense Rb atomic sample with a 3D temperature of /spl sim/1 K can be obtained and the appearance of an optically-trapped Bose-Einstein condensation may be possible in this optical trap. We have also made a proposal of a micro-wave electro-magnetic trap, which is working at the frequency which is very far from the optical transition of the cold atoms. The trapping force comes from the interaction between the electro-magnetic induced magnetic dipole moment with the electro-magnetic field. Theoretical calculation shows that the force can be used to trap the cold atoms in the trap.
The propagation of an atomic beam through a 1.7 m long magnetic guide with magnetic field gradient of up to 2.7 kGauss/cm has been demonstrated. The guide is side-loaded with an atomic beam from a Pyramidal MOT Low-velocity Intense Source. The atomic beam observed at the end of the guide has a flux of 3×10e7 atoms/s with a velocity of 1.2 m/s, a transverse temperature of 420±40 μK and a longitudinal temperature of 1 mK. The guided atomic beam was mode-filtered by selective removal of high-energy atoms using radio-frequency coupling to magnetically untrapped states. We found that the phase-space density of the atomic beam was very low for evaporative cooling to be functional. An imaging technique was developed to characterize the guided atomic flow in the presence of a high magnetic field gradient. This technique utilizes the open-channel transition to obtain nearly constant photon yield per atom independent of the location of the atom in the guide, providing a mapping of the fluorescence images to the atomic-density profiles. This technique was theoretically studied using Quantum Monte-Carlo Simulations and validated. A Zeeman slower was constructed and characterized to be used as the primary source of atoms to the magnetic guide. The Zeeman slower output atomic beam has a flux of 3×10e11 atoms/s at a velocity of 40 m/s. We have designed a new injection scheme to transfer atoms from the Zeeman slower to the magnetic guide efficiently. The details of a new method to evaporatively cool atoms in the magnetic guide using surface adsorption are described. Finally, a new guide geometry based on a spiral structure is discussed.